What should be considered when modifying a car's exhaust system?

2 Answers
LaBrielle
07/25/25 1:24pm
Considerations for modifying a car's exhaust system are as follows: Pay attention to exhaust performance: Exhaust performance is related to backpressure, which can also be referred to as backpressure or counterpressure. Simply put, it is the resistance inside the exhaust pipe; determine the diameter of the exhaust pipe. Pay attention to resonance phenomena: Resonance phenomena should be considered for the three-way catalyst and the central muffler section. What is a car's exhaust system: The car exhaust system refers to the system that collects and discharges waste gases. It is generally composed of an exhaust manifold, exhaust pipe, catalytic converter, exhaust temperature sensor, car muffler, and exhaust tailpipe. The car exhaust system mainly discharges the waste gases produced by the engine while reducing pollution and noise from the exhaust. The car exhaust system is primarily used for light vehicles, micro vehicles, buses, motorcycles, and other motor vehicles. How the car exhaust system works: After the exhaust gases in the engine cylinders are discharged through the exhaust valves, they are collected by the exhaust manifold of each cylinder into the main exhaust pipe. The gases are then purified by the three-way catalytic converter and muffled by the silencer before being discharged from the exhaust tailpipe outside the vehicle.
Was this review help?
3
4
Share
Jimenez
08/11/25 8:45pm
When it comes to modifying the exhaust system, let me first talk about the legal aspects. Before making any modifications, it's essential to check the local traffic regulations. For instance, many cities have noise level restrictions, and exceeding the decibel limit can easily result in a fine. When installing, prioritize reputable shops—DIY attempts carry too much risk, as unstable exhaust pipe connections may detach at high speeds and cause accidents. Don’t cut corners by removing the catalytic converter; it pollutes the air and is illegal. After modification, it’s best to conduct a pre-inspection for the annual check to identify any potential safety hazards. Noise control is also crucial—being too loud may lead to neighbor complaints, which isn’t worth it. In short, safety comes first, and adhering to regulations ensures peace of mind on the road.
Was this review help?
7
0
Share
Expand All
More Forum Discussions

How to Clean Oil Film on the Car Windshield?

There are several methods to clean the oil film on the car windshield: 1. Use a dedicated windshield oil film cleaner or detailing clay for removal; 2. Simply use toothpaste to remove it; 3. While driving, rinse it off with windshield washer fluid. Ensure any residues left during cleaning are thoroughly rinsed and wiped with a clean towel, otherwise water stains may form after the glass dries. The windshield is exposed to oil and dust in the air, and over time, without thorough cleaning, these accumulate to form an oil film on the vehicle. The oil film can obstruct the driver's view while driving, posing safety hazards, especially during rain or at night, and thus needs to be promptly removed. The oil film is very stubborn and cannot be completely removed with regular car washing. Special oil film removers and soft cloths are required for effective cleaning.
8
4
Share

What brand is anttna tire?

anttna is the Xiaoan tire brand, owned by the wholly foreign-owned Xinli Rubber Tire (Wenzhou) Co., Ltd. The company specializes in the research, development, sales, and import/export of semi-steel radial tires, with production bases in Vietnam and Shandong. Its products are mainly sold in Europe, America, Southeast Asia, and other regions. Xiaoan tires are characterized by wear resistance, impact resistance, and resistance to stone trapping, while also offering high cost-effectiveness. Tires are circular elastic rubber products mounted on various vehicles or machinery to roll on the ground. They are usually installed on metal rims to support the vehicle body, cushion external impacts, ensure contact with the road surface, and guarantee the vehicle's driving performance.
1
1
Share

What does four-wheel alignment mean for a car?

Four-wheel alignment refers to the specific relative positioning between the steering wheels, steering knuckles, and front axle of a car during installation. This specific relative positioning is called steering wheel alignment, also known as front wheel alignment. Front wheel alignment includes four aspects: caster angle, kingpin inclination angle, camber angle, and toe-in. This applies to the two front steering wheels, while the rear wheels also have a specific relative positioning with the rear axle, known as rear wheel alignment. Rear wheel alignment includes camber angle and individual rear wheel toe-in. Collectively, front wheel alignment and rear wheel alignment are referred to as four-wheel alignment.
16
1
Share

Why can't the sunroof of Audi Q5 close properly?

The reasons why the sunroof of Audi Q5 cannot close properly are: 1. System operation issue. You can try repeatedly closing the sunroof while driving, press the button that tilts the sunroof, pull it downward and forward, then set it in the MMI, and long-press the lock button to close the windows; 2. The motor overheats due to excessive resistance from jamming, which is common after summer exposure. Parking in a shady spot for a while can help, and you can add some lubricant or adjust the sunroof. The Audi Q5 is a mid-size SUV launched by Audi. In terms of body dimensions, its length, width, and height are 4629mm, 1898mm, and 1655mm respectively, with a wheelbase of 2807mm.
17
3
Share

What engine and transmission does the Toyota Highlander use?

Toyota Highlander uses a 6-speed automatic transmission with manual mode. The Highlander is a vehicle produced by Toyota. Below is the relevant introduction of the 2021 Highlander model: Dimensions: It is a mid-size SUV with body dimensions of: length 4890mm, width 1925mm, height 1720mm, and a wheelbase of 2790mm. Powertrain and Suspension: The 2021 Highlander features a MacPherson strut front suspension and an E-type multi-link rear suspension. It is equipped with a 2.0T turbocharged engine producing maximum horsepower of 220PS, maximum torque of 350Nm, and maximum power of 162kW, paired with a 6-speed automatic transmission with manual mode.
18
5
Share

What is the difference between a manual-automatic transmission and a dual-clutch transmission?

Manual-automatic and dual-clutch transmissions differ in their composition: a manual-automatic transmission is a combination of a manual transmission and an automatic transmission, featuring both manual and automatic modes; a dual-clutch transmission consists of two transmissions, both of which are automatic. The manual-automatic transmission integrates manual and automatic shifting modes, allowing drivers to freely adjust gears and RPM for a more dynamic and sporty driving experience. The dual-clutch transmission, or DCT, differs from conventional automatic transmission systems. It combines the flexibility of a manual transmission with the comfort of an automatic transmission while providing uninterrupted power output.
16
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.