···
Log in / Register

What Should Be Checked Before Driving?

4 Answers
Hubert
09/04/25 7:40am

Before driving, you should check the engine oil, tires, dashboard warning lights, brakes, headlights, and coolant. The relevant inspection details are as follows: Specific inspection details: Before driving long distances, you generally need to check whether the tire appearance has cracks or fissures, whether the performance of the braking system is normal, mainly checking the brake pads and brake fluid, then checking whether the engine oil and fuel are sufficient, and additionally, you need to check the lighting system. Tire inspection details: The component most immediately tested when a car maintains a relatively high speed for a long time is the tires. Because the high speed increases the friction between the tires and the road surface, as well as the temperature of the road itself, both can cause the tire temperature to rise. The rise in temperature directly affects the change in tire pressure, so abnormal tire pressure and tire condition before long-distance driving are the main culprits of tire blowout problems.

Was this review help?
13
3
Share
Perry
09/16/25 8:29am

Before driving, I believe safety is the top priority. I will check if the tire pressure is within the range recommended in the manual, as both too high or too low pressure can easily lead to a blowout, especially during long trips. Lights such as headlights and brake lights must be functioning properly to ensure better visibility for vehicles behind me at night or in rainy conditions, reducing the risk of rear-end collisions. The rearview mirrors should be adjusted to the right positions to avoid blind spots. Seat belts must be securely fastened, serving as the last line of defense against impacts. It's also important to check around the car for any children or pets running nearby, especially before reversing, and listen for any unusual noises or signs of oil leaks to address potential issues early and avoid breakdowns on the road. Developing these habits can significantly reduce the chances of accidents, making driving safer and more reassuring.

Was this review help?
10
2
Share
Expand All
VonVivian
10/31/25 2:16am

I always consider saving money and protecting my car before driving. Check that the tire pressure is moderate—too low increases fuel consumption and wear, while too high can cause bulging and costly tire replacements. Keep the engine oil level topped up to avoid overheating and expensive engine damage. Insufficient brake fluid can lead to brake failure, which is costly to repair. Replacing a burnt-out light bulb only costs a few dollars but prevents bigger issues. Developing a habit of regular inspections helps catch small problems before they turn into major repairs, extending the vehicle's lifespan and maintaining its resale value. Spending a few minutes on checks is actually an investment in your wallet—it's economical and practical.

Was this review help?
6
5
Share
Expand All
OscarDella
12/14/25 2:24am

Before driving, I mainly focus on driving comfort. First, adjust the seat and rearview mirror to the most comfortable position to avoid back fatigue on long trips. Check if the air conditioning is cooling or heating properly—being too hot in summer is irritating, and too cold in winter is uncomfortable. Clean the windows for clear visibility, which also improves mood. Ensure the tire pressure is sufficient for a smooth and vibration-free ride. Address any unusual noises promptly to avoid disturbances during the trip. These small details ensure every drive is relaxed and enjoyable, free from fatigue and full of enjoyment.

Was this review help?
7
5
Share
Expand All
More Forum Discussions

What is the difference between high-speed motors and low-speed motors?

The differences between high-speed motors and low-speed motors are as follows: 1. Different design perspectives: From a design perspective, high-speed motors have a small rotor diameter and a large length; low-speed motors have a large rotor diameter and a small length. A smaller diameter means a relatively smaller linear speed of the rotor's outer diameter, and the centrifugal force on the embedded windings during high-speed rotation is relatively small, making them suitable for high-speed operation. Here, high-speed specifically refers to tens of thousands of revolutions, while general motors operate at a few thousand revolutions, which does not reflect this design concept. 2. Different motor power: Due to the high speed, high-speed motors have a high power density, and their volume is much smaller than that of low-speed motors, effectively saving materials. 3. Different efficiency: High-speed motors are directly connected to the prime mover, eliminating the traditional speed reduction mechanism, resulting in high transmission efficiency and low noise; low-speed motors produce more noise.
9
0
Share

What Causes a Car to Stall?

Reasons for car stalling: 1. Electrical circuit failure - This may occur due to low-voltage power interruption during driving, causing the engine to stall. In this case, you should primarily check the ignition and starter switches as well as the fuse box; 2. Short circuit in low-voltage wiring causing stalling - This situation requires inspection of the low-voltage circuits; 3. Component failure - This issue is usually related to faults in the ignition coil, capacitor, or electronic ignition module; 4. Fuel system failure - Damage to the fuel pump, fuel line rupture, clogged carburetor fuel inlet, or empty fuel tank can cause stalling, though the car may still be restarted with difficulty in such cases; 5. Ignition system failure - Problems with the engine overheating or the anti-knock system can also lead to stalling.
2
4
Share

How to Customize a License Plate Number?

License plate number customization method: 1. Enter the vehicle type, ID number, and the vehicle's VIN, then select the region; 2. Customize the license plate number in the system, which usually offers numbers and letters to choose from. After selecting a satisfactory license plate number, press confirm and proceed with other formalities. The self-service license plate customization system is installed on self-service touchscreens in the DMV service hall. The search, query, and license plate confirmation are all completed independently by the vehicle owner. Therefore, vehicle owners should follow the instructions when selecting their license plate numbers. Once the customized license plate number is confirmed by the owner, it is automatically uploaded to the DMV's vehicle registration system and cannot be changed. Vehicle owners should avoid input errors.
18
2
Share

How to reset the maintenance light on the Roewe RX3?

Method to reset the maintenance light on the Roewe RX3: 1. Turn off the ignition switch while holding down both arrow buttons simultaneously; 2. Turn on the ignition switch, and after about 3 seconds, release the two arrow buttons; 3. The reset menu will appear, asking if you want to reset—hold the SET button for more than 3 seconds; 4. Press the MODE button, then turn off the ignition switch to complete the reset. In terms of appearance, the Roewe RX3 features the brand's signature shield-shaped front grille, integrated with the headlights on both sides. The side profile boasts smooth and clean lines, with a sleek design that gives it a robust look. The dimensions of the Roewe RX3 are 4408 mm in length, 1804 mm in width, 1651 mm in height, with a wheelbase of 2625 mm.
14
2
Share

Are there cameras at highway exit ramps?

There are cameras at highway exit ramps. Here are specific details about highway ramps: 1. Introduction: Ramps are part of the highway, and reversing on highway sections is not allowed. Typically, surveillance cameras are installed at ramp entrances. If a vehicle reverses on a ramp, it will definitely be captured and subject to corresponding penalties. 2. Reversing: Stopping, making U-turns, backing up, or reversing on highways are extremely dangerous traffic behaviors. Due to the high speed, drivers have very short reaction times, making it easy to cause traffic accidents with unimaginable consequences. Highway accidents are often catastrophic, harming both oneself and others. Therefore, reversing is prohibited on highways. If discovered, the driver will have 12 points deducted from their license and may face suspension of their driving permit. 3. Precautions: When exiting the highway, drivers should pay attention to exit warning signs, change lanes in advance, and follow the instructions to enter the lane connected to the exit for deceleration. If an exit is missed, drivers must continue forward until the next exit to leave the highway. They must not reverse, drive in the opposite direction, overtake, or stop.
2
4
Share

What is the ground clearance of the Ford Mustang?

The ground clearance of the Ford Mustang is 120 millimeters. In terms of exterior design, although the side profile of the Ford Mustang still emphasizes stability, a trapezoidal indentation line runs from the front fender straight to the rear fender, showcasing the vehicle's dynamic character. The rear end also maintains a stable appearance, with vertical tail lights featuring a distinctive rectangular design. For the interior, the Ford Mustang offers optional interior color accent packages, including charcoal black leather seats with red stitching, red door panels, and red floor mats. In terms of features, the Ford Mustang comes equipped with one-touch power windows, power-adjustable mirrors, a keyless entry system, power locks, a heated rear window, and intermittent windshield wipers.
8
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.