What should be checked before a long-distance trip with a car?

2 Answers
KeeganRose
07/25/25 5:04am
Before a long-distance trip with a car, you need to check the antifreeze, engine oil, brake fluid, tires, lights, fuel tank, etc. Precautions for long-distance driving: Fasten seat belts throughout the journey; drive courteously; pay attention to road sign prompts while driving; avoid driving in snowy weather if possible; maintain a safe distance from the vehicle ahead for safety reasons. Small details for long-distance driving: Beware of low-quality gasoline and protect the undercarriage from impacts. Low-quality gasoline not only affects driving performance but also causes significant damage to the engine's core components; exercise extra caution when passing through rough terrain to avoid severe undercarriage scrapes; avoid overloading the vehicle.
Was this review help?
5
3
Share
BrielleFitz
08/10/25 5:35pm
Before a long trip, I'm most concerned about the tires! The tire pressure must be accurately measured with a tire pressure gauge, especially when fully loaded or driving at high speeds. The spare tire also needs to be checked—low pressure or aging can be disastrous. Last time, my friend found a barely noticeable bulge on the sidewall of a tire while driving on the highway, but luckily it was replaced in time. Remember to bring a car air pump—refilling at service areas is too troublesome. Also, test the brake lights and turn signals; driving at night with incomplete lighting is particularly dangerous. Finally, top up the windshield washer fluid—it’s a headache to encounter dirty roads on a long trip and not be able to spray water.
Was this review help?
17
5
Share
Expand All
More Forum Discussions

What to Do When the Fabric on the Car Roof Falls Off?

You can go to an auto repair and beauty shop for maintenance, or you can fix it yourself. Here is more information about car roof fabric: 1. Introduction: (1) The car roof fabric is an important part of the car's roof. (2) Its main function is to improve the interior decoration, while the composite fabric of the car roof can also enhance the insulation effect with the outside, reduce interior noise, improve sound absorption, and enhance the comfort and safety of passengers. 2. Reasons for detachment: (1) Edge detachment of the roof fabric is likely due to aging of the velvet sponge, causing the edges to fall off. (2) If the middle of the roof collapses, you can choose to fix it with clips. (3) For large-scale detachment of the roof fabric, you need to remove the old fabric, clean the surface of the aged sponge, prepare a new piece of roof fabric, and use special roof adhesive. Apply the adhesive on both sides, let it dry for 3-5 minutes, and then bond.
1
2
Share

Where is the vehicle bumper located?

The vehicle bumper is located at the front and rear of the vehicle, referred to as the front bumper and rear bumper respectively. The bumper consists of an outer panel, cushioning material, and crossbeam, serving the following purposes: 1. Safety protection; 2. Absorbing external impacts; 3. Protecting pedestrians; 4. Decorative function; 5. Improving the vehicle's aerodynamics. The bumper painting process includes: 1. Cleaning the bumper thoroughly; 2. Drying off moisture; 3. Surface spraying; 4. Sanding and wiping clean; 5. Flame treatment; 6. Electrostatic dust removal; 7. Spraying operation; 8. Applying gray primer; 9. Spraying the pre-mixed color paint, followed by clear gloss paint, then polishing after baking.
11
5
Share

What is the function of the transmission interlock device?

1. The function of the transmission interlock device: To prevent the occurrence of automatic gear shifting or gear disengagement during vehicle movement, where gear disengagement refers to the gear shifting back to neutral. 2. Automotive transmission: It is a set of speed-changing devices used to coordinate the engine speed with the actual driving speed of the wheels, aiming to achieve the optimal performance of the engine. 3. Working principle: The self-locking device consists of a self-locking steel ball and a self-locking spring. The upper surface of each shift fork shaft has three grooves distributed along the axial direction. When any shift fork shaft, together with the shift fork, moves axially to the neutral position or a working position, one of the grooves will align with the self-locking steel ball. Under the pressure of the spring, the steel ball embeds into the groove, fixing the axial position of the shift fork shaft. Consequently, the shift fork, along with the sliding gear (or engaging sleeve), is also fixed and cannot disengage on its own.
7
5
Share

Where is the location to add windshield washer fluid in a Toyota Corolla?

Toyota Corolla windshield washer fluid location: Open the engine hood, on the right front side of the engine compartment there is a windshield washer fluid reservoir. The reservoir cap has a windshield wiper symbol (usually colored). Windshield washer fluid is commonly known as automotive windshield cleaning fluid, which is a type of vehicle consumable. It mainly consists of water, alcohol, ethylene glycol, corrosion inhibitors and various surfactants. When driving, if you feel the front windshield's visibility is insufficient, using windshield washer fluid will restore clear vision. If the washer fluid runs out, the fluid won't spray when using the wipers, requiring immediate refill. Note that tap water cannot substitute windshield washer fluid as it lacks the cleaning power of proper washer fluid. Regularly check the washer fluid level and replenish when needed. The Toyota Corolla's body dimensions are 4620mm (length) × 1775mm (width) × 1480mm (height) with a 2700mm wheelbase.
20
0
Share

How to Charge the BYD Song DM?

BYD Song DM charging methods: Install a wall-mounted charging pile; Use public charging piles; Use the portable charger that comes with the car. When purchasing the vehicle, the manufacturer provides a portable home charger that can be directly plugged into a 220V household socket for charging. The BYD Song DM is a model under the BYD brand, with body dimensions of 4600mm in length, 1870mm in width, and 1700mm in height, and a wheelbase of 2660mm. Appearance: The BYD Song DM retains the design of the fuel version, featuring a two-tone body and replacing the brand logo with the Chinese character "Song". It also differs from the fuel version in some details, such as the X-shaped trim panel below the grille being painted in the same color as the body, the wheels adopting a silver and blue dual-tone color scheme, and the DM logo marked on the D-pillar to distinguish its powertrain attributes.
19
4
Share

Is Dongfeng Infiniti a Joint Venture Car?

Dongfeng Infiniti is a joint venture car, with currently available models including the Infiniti Q50L and the Infiniti QX50. The Infiniti Q50L is positioned as a mid-size sedan. The 2018 Infiniti Q50L has dimensions of 4867mm in length, 1823mm in width, and 1456mm in height, with a wheelbase of 2898mm. The Infiniti Q50L is equipped with a 2.0T engine across all variants, paired with a 7-speed automatic transmission. The Infiniti QX50 is a mid-size SUV that meets the China V emission standards. Its body dimensions are 4705mm in length, 1903mm in width, and 1681mm in height, with a wheelbase of 2798mm. The Infiniti QX50 is also equipped with a 2.0T engine across all variants, matched with a CVT transmission.
20
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.