What series is the Mercedes-Benz CL?

1 Answers
Kai
07/30/25 2:22am
Mercedes-Benz CL generally refers to the Mercedes-Benz CL-Class. CL stands for coupe, meaning light and agile, representing Mercedes-Benz's high-performance coupe, which is a large four-seat coupe developed based on the luxury S-Class. The first generation of the Mercedes-Benz CL was released in 1952 and is a classic series in the Mercedes-Benz lineup. Introduction to the Mercedes-Benz CL: 1. Exterior: The wide body features elegant lines, fully showcasing Mercedes-Benz's understanding and grasp of aesthetics and fashion. As the highest-end model in the Mercedes-Benz brand, the CL is positioned above the Mercedes-Benz S-Class. 2. Power: Equipped with a V12 5.5L twin-turbocharged engine, it delivers a maximum power of 380kW (517Ps)/5000rpm and a maximum torque of 830N·m/1900-3500rpm. The 0-100 km/h acceleration time is just 4.6 seconds.
Was this review help?
5
1
Share
More Forum Discussions

Which gear should be used when driving an automatic transmission car uphill?

Automatic transmission cars can use D gear or S gear when going uphill. The following is a detailed introduction to gear selection for different road conditions: 1. Uphill: This type of road section requires high torque intervention, and you can use "D-" to downshift. However, sometimes when there is sufficient power, it is also necessary to use "D+" to upshift to prevent power waste and damage to the engine and transmission. When encountering steep slopes, even after downshifting, you may still experience insufficient vehicle power. In this case, use the S gear (sport mode). 2. Downhill: Use "D+" to shift up to D2 or D3 gear, which can restrain the engine to achieve a braking effect. Generally, gears 2-3 are sufficient for moderate slopes, but when encountering steep slopes, pay attention to switching to gear 1. If the vehicle starts sliding faster, you should also use "D-" to downshift and control the vehicle.
18
0
Share

What should be the tire pressure for front tires?

The tire pressure for front tires should be around 2.3 bar. Car tire pressure refers to the air pressure inside the tire. The effects of abnormal tire pressure are: 1. Reduced friction and adhesion of the tire, affecting braking performance; 2. Causes steering wheel vibration and deviation, reducing driving comfort; 3. Accelerates localized wear of the tread pattern in the center of the tire, shortening tire lifespan; 4. Increases body vibration, indirectly affecting the lifespan of other components. Methods for tire maintenance include: 1. Avoiding curbs and potholes to prevent sidewall ply breakage leading to tire bulges; 2. Regularly removing debris from tire grooves to prevent blowouts; 3. Checking tire wear and replacing them in time; 4. Performing tire rotation to avoid excessive wear; 5. Regularly checking tire pressure, ensuring it is neither too high nor too low.
20
4
Share

Is the Nissan GTR a Supercar?

The Nissan GTR is a supercar, featuring a 2-door, 4-seater hardtop coupe design. Its body dimensions are: length 4715mm, width 1895mm, height 1371mm, with a wheelbase of 2780mm and a fuel tank capacity of 74 liters. It adopts a front-engine, four-wheel-drive layout, equipped with double-wishbone independent front suspension and multi-link independent rear suspension. The Nissan GTR is powered by a 3.8T twin-turbocharged engine paired with a 6-speed dual-clutch transmission, delivering a maximum power of 408 kW at 6800 rpm and a peak torque of 632 N·m between 3300 to 5800 rpm.
12
4
Share

What to Do When Vehicle Brakes Suddenly Fail?

Vehicle brake suddenly fails processing method is: 1. Release the accelerator pedal; 2. Shift to manual mode and manually downshift from high gear to low gear sequentially; 3. When pulling the handbrake, hold the release button and pull the handbrake continuously without locking it; 4. After the vehicle stops, shift into park. The reasons for sudden brake failure in vehicles are: 1. Impurities in the brake master cylinder or poor sealing; 2. Vacuum booster pump failure; 3. Brake fluid is too dirty; 4. Brake master cylinder or wheel cylinder oil leakage; 5. Air leakage in the air reservoir or pipeline connections; 6. Severe overloading; 7. Brake drum carbonization; 8. Lack of brake fluid in the brake master cylinder; 9. Wear of the brake master cylinder piston.
9
4
Share

Which speed limit should pickup trucks follow on highways?

Pickup trucks must adhere to the speed limit regulations for trucks in the outermost lane, with a maximum speed limit of 100km/h, not 120km/h, and a minimum speed no less than 60km/h. Exceeding the speed limit by 50% or more will result in an immediate deduction of 12 driver's license points. Below are precautions for pickup trucks driving on highways: 1. Avoid overloading: The 2019 pickup truck policy clearly states that closed highway toll stations will implement non-stop weight detection at entry points. The purpose of not charging by weight is to prevent pickup trucks from exceeding weight limits. 2. Observe speed limits: If a pickup truck exceeds the speed limit by less than 10% on the highway, it will incur 3 points without a fine; exceeding the speed limit by 10% but less than 20% will result in 3 points and a 150 yuan fine; exceeding the speed limit by 20% but less than 50% will incur 6 points and a 200 yuan fine; exceeding the speed limit by 50% or more will result in 12 points and a 1000 yuan fine.
6
2
Share

What are the parameters of a dash cam?

The resolution parameters of a dash cam include specifications such as 480P, 720P, and 1080P. Below are the detailed specifications of a dash cam: 1. Time options: The loop recording settings of a dash cam typically offer different time options such as 1 minute, 2 minutes, 3 minutes, 5 minutes, and 10 minutes. After recording is complete, it moves to the next segment. 2. Recommended loop time of 3 or 5 minutes: When setting the loop recording time for a dash cam, avoid setting it too short or too long. If the recording time is too short, the video will be split into more segments, increasing the chance of dropped frames. Conversely, if the time is too long, fewer videos will be stored and they will be overwritten quickly. It is recommended to set the loop time to 3 or 5 minutes for optimal performance. 3. Function: A dash cam is a device that records images, sounds, and other relevant information during vehicle travel. After installing a dash cam, it can record the entire process of driving, including video images and sound, which can serve as evidence in traffic accidents.
6
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.