What Sector Does Great Wall Motors Belong To?

1 Answers
DeKyle
07/30/25 3:44am
Great Wall Motors belongs to the Shanghai Stock Exchange Main Board A-shares. Below is an introduction to relevant information about Great Wall Motors: Brand: A Chinese automotive brand established in 1984. Production: Mainly produces SUVs, electric vehicles, pickup trucks, sedans, and new energy vehicles. Subsidiary Brands: Comprises four major brands - Great Wall, Haval, WEY, and the pure electric brand ORA. Design: Off-road vehicles are specifically designed for rough terrain, primarily referring to vehicles capable of operating on uneven ground. Key Features: Main characteristics include a body-on-frame structure, four-wheel drive, high ground clearance, tires with excellent traction, elevated exhaust pipes, substantial horsepower, and robust bumpers.
Was this review help?
17
4
Share
More Forum Discussions

Is Geely a domestic or joint-venture car brand?

Geely is a domestic car brand. Geely Automobile primarily produces SUVs, sedans, and other vehicle models. The company has launched three sub-brands: Gleagle, Emgrand, and Englon. Taking the Geely Emgrand GL as an example, its body dimensions are 4725mm in length, 1802mm in width, and 1478mm in height, with a wheelbase of 2700mm. The ACC adaptive cruise control system and urban pre-collision safety system give the Emgrand GL advantages that are hard to surpass for most vehicles in its class. In terms of active safety, the Emgrand GL is also equipped with intelligent safety features such as the Bosch 9.1 version ESP body stability control system, TPMS intelligent tire temperature and pressure monitoring system, EPB electronic parking brake system, and AUTOHOLD automatic parking system.
7
0
Share

What to Do If a Beginner Driver Keeps Stalling When Starting the Car?

Solutions for beginners who keep stalling when starting the car: First, practice lifting the clutch pedal until you feel the engagement point, which is when the car is about to move (also known as the half-clutch state). At this point, stop lifting and hold it steady, then slowly release the clutch. This will allow the car to start smoothly. Practice coordinating the clutch and throttle: when lifting the clutch to the half-clutch state, hold it steady, and while slowly releasing the clutch, gently press the throttle to achieve a smooth start. If stopping on an uphill slope, ensure your right foot does not release the throttle, maintaining sufficient climbing power until reaching the chosen parking spot. When performing the parking maneuver, coordinate both feet effectively: as the right foot releases the throttle, the left foot should quickly and accurately depress the clutch. Just before the car comes to a complete stop, apply the brakes to halt the vehicle, then engage the handbrake and release the foot brake.
13
1
Share

What does the highway ETC refer to?

Highway ETC (Electronic Toll Collection) translates to electronic toll collection, which is a non-stop toll collection system. On highways, there will be one or more ETC lanes. ETC toll collection method: Through dedicated short-range microwave communication between the vehicle-mounted RFID tag installed on the vehicle's windshield and the microwave antenna on the ETC lane at the toll station, the system uses network technology to conduct background settlement processing with the bank, thereby achieving the purpose of vehicles paying tolls without stopping when passing through bridge and road toll stations. Banks install this type of ETC express card with a post-payment system. ETC application conditions are as follows: Provide the original and photocopy of the vehicle owner's valid ID card and vehicle registration certificate. The photocopy of the driver's license should include the page with the most recent annual inspection seal; Postal credit card application form, which is used to bind the ETC card. After obtaining the credit card, swipe it twice and present the POS slip to the designated postal outlet to receive and install the ETC onboard device for free, with no additional charges; Must be between 18 and 60 years old; Must own a personal vehicle. Below are precautions for installing ETC: Do not obstruct the view; it is best to install it behind the rearview mirror: Many car models have a large rearward tilt angle of the windshield, which reduces the driver's field of vision. If this is not considered during ETC installation, it will increase the driver's blind spots. Install it on the right side behind the rearview mirror to avoid obstructing the view. Do not interfere with charging: The ETC electronic tag consumes power but generally does not require charging or battery replacement because it has a solar panel on the back that can charge itself. Therefore, during installation, avoid the blackened areas on the windshield and positions that may block the solar panel. Once installed, do not remove it arbitrarily: The button in the middle of the adhesive is an anti-tamper lever connected to a switch. After the electronic tag is installed, the windshield will press the anti-tamper lever in. If it is removed arbitrarily, the lever will pop out and trigger the switch, locking the electronic tag and rendering it unusable. You will then need to visit an ETC service point to unlock it. This is designed to prevent multiple vehicles from sharing one device. Notes for using ETC: The ETC transaction sensing range is 8 meters. To prevent the ETC device of the vehicle in front from malfunctioning, maintain a distance of more than 10 meters from the vehicle in front to avoid automatic sensing and paying for the vehicle ahead; the ETC lane recognition speed is 20 kilometers per hour. Driving too fast may prevent the vehicle device information from being read, leading to failed toll deductions; when using a debit card bound to ETC, insufficient balance will also cause toll deduction failure.
3
5
Share

How to Warm Up a Car?

Methods for warming up a car: 1. Start driving within 30 seconds to one minute after ignition, but avoid high-speed driving at this time and maintain a low speed; 2. Keep the engine speed below 3,000 to 3,500 RPM, generally maintaining around 2,000 RPM, otherwise, the severe wear on the engine and transmission will be irreversible; 3. Once the engine temperature rises to the normal operating temperature, you can resume your usual driving habits. Both summer and winter require warming up the car, with winter requiring a longer warm-up time than summer. After sitting overnight, the lubricating oil on the friction surfaces of the engine has mostly dissipated, losing its protective oil film. Low temperatures increase the viscosity of the lubricating oil, reducing its adhesion and fluidity, which increases resistance during engine startup.
13
1
Share

What is the validity period of a car fire extinguisher?

There are two types of validity periods for car fire extinguishers: 1. The extinguisher cylinder, which has a validity period of 8 years; 2. The extinguishing agent, which has a shorter validity period, around one year. Car fire extinguishers mainly include dry powder extinguishers, ultra-fine dry powder extinguishers, carbon dioxide extinguishers, and water-based extinguishers, with dry powder extinguishers being the most commonly used. Dry powder extinguishers use carbon dioxide liquid or nitrogen to spray dry powder for fire suppression. Car fire extinguishers are equipped with pressure gauges. If the needle on the gauge is in the green range, it indicates normal pressure and proper functioning; if it is in the yellow range, it indicates excessive pressure, and if it is in the red range, it indicates insufficient pressure. Both of these conditions can affect the extinguishing performance, and the extinguisher should be replaced promptly.
10
4
Share

Should You Release the Handbrake or Shift Gear First When Starting the Car?

When starting the car, you should shift gear first and then release the handbrake. On uneven roads, there might also be issues with the throttle or clutch. The benefits of shifting gear before releasing the handbrake include preventing the car from rolling forward or backward, thus avoiding dangerous situations. The correct method to start driving is to first insert the key, then turn on the ignition switch, and start the car. The handbrake, professionally known as the auxiliary brake, operates differently from the main brake. It uses a steel cable connected to the rear brake shoes to apply braking force to the car. Long-term use of the handbrake can cause the steel cable to undergo plastic deformation, which is irreversible and will reduce its effectiveness over time, increasing the handbrake's travel distance. The handbrake system also includes a return spring; when the handbrake is engaged, the spring stretches, and when released, it returns to its original length.
13
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.