What's the reason why the Zotye E200 can't be charged?

1 Answers
VanKarter
07/28/25 2:15pm
It may be due to a charging system malfunction that prevents charging. It is recommended to check whether there are any problems with the wiring and controller, etc. Generally, even if the storage battery is damaged or degraded, it should not be completely unable to charge. The Zotye E200 is an A00-class pure electric vehicle launched by Zotye New Energy, which uses a ternary lithium battery. The following are precautions for using car batteries: 1. Remember to turn off the lights: For example, forgetting to turn off the lights during the day, especially the headlights. Some beginners may turn on the car lights while playing with the car during the day and forget to turn them off after turning off the engine. Over time, the battery power will be depleted. Also, listening to music or using the air conditioning when the car is not started can also drain the car battery over time. 2. Pay attention to maintenance: To prevent the car battery from running out of power, it is important to maintain it properly. First, avoid frequently starting the car. The car also has a lifespan, and repeatedly starting it will cause wear and tear. If the car doesn't start the first time, wait a moment before trying again, as continuous attempts to start the car put a lot of pressure on it, increase discharge, and gradually reduce the battery's lifespan.
Was this review help?
1
2
Share
More Forum Discussions

How to Solve Gear Grinding in Cars?

Gear grinding is essentially the direct collision between two metal gears, which ultimately leads to accelerated wear on the gear teeth. Over time and with frequent occurrences, the originally right-angled gear teeth become rounded, resulting in incomplete engagement after shifting. The solutions for gear grinding in cars are as follows: 1. First, bring the car to a complete stop before shifting gears. 2. Then, depress the clutch pedal fully. Measures to avoid gear grinding include: 1. Inside a manual transmission, there is a crucial component called the 'synchronizer.' The synchronizer's role is to match the speed of the gear being shifted into with the output gear's speed during a shift, preventing gear grinding. 2. When reversing, it is necessary to bring the vehicle to a complete stop to reduce the speed difference between the power output and the reverse gear, ensuring smooth engagement without gear grinding.
19
0
Share

What are the causes of body vibration when the vehicle speed is between 60 and 80?

When the vehicle speed is between 60 and 80, the causes of body vibration are as follows: 1. It is caused by the aging or damage of the engine or transmission mount pads. Replacement can eliminate the issue. 2. Damage to the chassis half-shaft or drive shaft; this mostly occurs during acceleration or deceleration conditions. 3. The tire and rim require dynamic balancing, or the tire may be aging and deformed, or the rim may be deformed. Perform tire dynamic balancing as needed to check the condition of the tire and rim. When the car accelerates from 60 mph to 80 mph, the front body vibrates, but it does not vibrate when the accelerator is not pressed, nor does it vibrate at other speeds. This is caused by excessive clearance in the front suspension ball joint or connecting components, which creates vibration at a certain frequency. It is necessary to go to a repair shop to adjust the toe-in and front wheel alignment.
8
0
Share

How to reset the tire pressure warning on Dongfeng Fengshen AX7?

Dongfeng Fengshen AX7 tire pressure warning reset methods are as follows: Abnormal tire pressure: The system typically triggers a warning when pressure falls below 1.8bar or exceeds 3.0bar. In this case, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure monitoring system isn't reset promptly, it continues to record the previous data, causing the tire pressure warning light to illuminate. Simply perform a tire pressure reset to resolve this. Damaged tire pressure sensor: The tire pressure sensor, which monitors tire pressure, is directly installed inside the tire and connected to the tire inflation valve. If the sensor is damaged during driving (e.g., by hitting a curb), it will trigger the tire pressure warning light. For sensor damage issues, replacement with a new component is the only solution. Tire pressure monitoring automatically checks tire pressure in real-time while driving, alerting drivers to leaks or low pressure to ensure driving safety.
12
1
Share

How to Force Brake with Electronic Handbrake?

Electronic handbrake can be forced to brake by pulling the button to send a brake signal to the vehicle's computer, then holding the electronic handbrake button up for 3 seconds. The vehicle's computer will automatically determine that the vehicle needs to force brake and then issue a command to the ESP body stability control system to perform a special emergency brake. Electronic braking mainly relies on the ECU vehicle computer to make judgments and issue commands to the vehicle. By pulling up and pressing the button, the vehicle makes a brake signal. Many car models now adopt electronic braking design. Electronic handbrake is a technology that achieves parking brake through electronic control. Its working principle is the same as that of mechanical handbrake, both of which achieve parking brake control through the friction generated by the brake disc and brake pads, except that the control method has changed from the previous mechanical handbrake lever to an electronic button. Electronic Parking Brake (EPB) refers to the integration of temporary braking during driving and long-term braking after parking, and the technology of achieving parking brake through electronic control. Electronic handbrake extends from the basic parking function to the automatic parking function AUTOHOLD. The application of AUTOHOLD automatic parking function technology allows drivers not to brake for a long time when the vehicle stops. Starting the automatic electronic parking brake can avoid unnecessary sliding of the vehicle.
13
3
Share

How to reset the tire pressure light on Dongfeng Honda?

Dongfeng Honda tire pressure light reset method is as follows: First, turn on the ignition switch, press and hold the tire pressure monitoring reset button until you hear a "ding" sound, then release. The tire pressure monitoring system will store the current normal tire pressure data, automatically clear the previous data, and finally the dashboard warning light will turn off, completing the tire pressure reset. There are generally three reasons for the tire pressure light to illuminate: Abnormal tire pressure: The system usually triggers an alarm when pressure is below 1.8 bar or above 3.0 bar. In this case, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure reset is not performed promptly, the system continues to record the previous data, causing the tire pressure monitoring indicator to light up. Simply performing a tire pressure reset will resolve this issue. Damaged tire pressure sensor: The tire pressure sensor, which monitors tire pressure, is installed inside the tire and connected to the tire inflation valve. If the sensor is damaged during driving (e.g., by hitting a curb), it will also cause the tire pressure warning light to illuminate. For sensor damage issues, replacement with a new component is the only solution.
1
5
Share

What is the function of the cylinder head gasket?

The functions of the cylinder head and cylinder gasket are as follows: 1. Cylinder head: It withstands the mechanical load caused by gas force and the tightening of cylinder head bolts, as well as high thermal loads due to contact with high-temperature combustion gases. 2. Cylinder gasket: It fills the tiny gaps between the cylinder block and cylinder head, ensuring good sealing at the joint surface, thereby maintaining combustion chamber sealing and preventing cylinder gas leakage and water jacket leakage. Relevant information about cylinder head gaskets is as follows: 1. Cylinder head: It is the engine cover and component that seals the cylinder, typically made of cast iron or aluminum alloy. It serves as the mounting base for the valve mechanism and the sealing cover of the cylinder, forming the combustion chamber together with the inner surface of the cylinder and the top of the piston. 2. Cylinder gasket: It must have sufficient strength and be resistant to pressure, heat, and corrosion. It also needs a certain degree of elasticity to compensate for the roughness and unevenness of the cylinder block top surface and the cylinder head bottom surface, as well as the deformation of the cylinder head caused by gas force during engine operation.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.