What's the reason when the window button doesn't respond?

Why Does the Audi Brake Pad Make Noise?

Audi brake pad noise is caused by not polishing the old brake disc or issues with the brake pad material. Not polishing the old brake disc: When installing new brake pads, if the old brake disc is not polished, it can lead to improper installation. If the installation is improper or new pads are installed without polishing the old disc, the new pads will directly rub against the uneven surface of the old disc, resulting in uneven wear of the new brake pads. In fact, 90% of noise issues are caused this way. Solution: First, polish the edges of the brake pads to ensure they do not rub against the brake disc, which will eliminate the noise. If this doesn't work, the brake disc must be polished and smoothed using a brake disc repair machine to solve the problem. Brake pad material issues: If the brake pad material contains large particles, it can easily cause noise during braking. The solution is to replace the brake pads with better-quality ones, such as ceramic brake pads.

13

0

Share

Can a 26-ton three-axle truck drive on the highway?

No, it cannot drive on the highway. According to the "Regulations on the Administration of Over-Limit Transport Vehicles Driving on Highways," the weight limit for a three-axle truck on the highway is 25 tons, while the limit for a three-axle articulated vehicle is 27 tons. The load capacity of a three-axle articulated vehicle is significantly higher than that of a three-axle truck, and its length is also much greater. The toll standard for three-axle vehicles on highways is based on weight. The specific calculation method is as follows: For vehicles weighing between 10 to 20 tons, the fee rate decreases linearly from the standard rate to 5/6 of the standard rate. For vehicles weighing between 20 to 40 tons (inclusive), the fee rate for the first 10 tons or less is charged at the standard rate. For the portion between 10 to 40 tons, the fee rate decreases linearly from the standard rate to 30% of the standard rate. For vehicles exceeding 40 tons, the first 10 tons or less are charged at the standard rate, while the portion exceeding 10 tons is charged at 30% of the standard rate. Relevant provisions of the "Regulations on the Administration of Over-Limit Transport Vehicles Driving on Highways": Over-limit transport vehicles carrying divisible loads (referred to as illegal over-limit transport) are prohibited from driving on highways. Vehicles whose overall dimensions or total mass do not exceed the limits specified in Article 3 of these regulations but exceed the load, height, width, or length restrictions of specific highways, bridges, or tunnels are not allowed to drive on those roads, bridges, or tunnels. Freight origin units and road transport enterprises should strengthen education and management of freight vehicle drivers, urging them to comply with legal transport requirements. Road transport enterprises are the primary entities responsible for preventing illegal over-limit transport and must monitor the entire process of vehicle loading and operation in accordance with relevant regulations to prevent drivers from engaging in illegal over-limit transport.

7

4

Share

Where is the engine control module located in the BMW 5 Series F18?

BMW 5 Series F18 airbag control module is located under the hood, near the right side of the engine compartment. BMW 5 Series: The BMW 5 Series is a mid-size luxury sedan under the BMW brand. The dimensions of the long-wheelbase version of the BMW 5 Series are 5087mm in length, 1868mm in width, and 1500mm in height, with a wheelbase of 3108mm. The 2020 domestically produced BMW 5 Series is equipped with either a low-power version or a high-power version of a 2.0-liter turbocharged engine. Automotive Control Module The automotive control module is an electronic device that automatically processes input signals from various sensors according to a predetermined program and then outputs signals to actuators to control the operation of the vehicle.

5

3

Share

What Causes the Skoda Octavia Remote Control Window Switch to Malfunction?

Skoda Octavia remote control window switch malfunction may be caused by temporary loose connection or power interruption of related components leading to function failure. Solution: You can resolve the issue by resetting the one-touch window operation. Car Window: An important component of the entire vehicle body, designed to meet the needs of interior lighting, ventilation, and visibility for drivers and passengers. Windows are categorized by glass installation positions: front/rear windshields, side windows, and door windows. The design structure and quality of windows significantly impact driver visibility, passenger comfort, exterior aesthetics, and aerodynamic characteristics.

6

4

Share

How many reverse lights are illuminated on the new Lavida?

Lavida reverse lights generally illuminate one. Working principle of the reverse light switch: When the reverse gear is engaged, the mechanical mechanism presses down the switch contacts, closing the circuit to illuminate the reverse light and activate the reverse warning sound. When disengaging from reverse gear, the switch contacts spring back, returning the reverse light circuit to an open state. Location of the reverse light switch: The reverse light switch in tractors is usually installed on the transmission, triggered by depressions on the gearshift lever. During operation, due to continuous high temperatures in the transmission, the internal insulating rubber of the switch tends to age and fail, and the switch's capacity is relatively small. Normally, when both rear lights and the reverse buzzer of a tractor operate simultaneously, the current through the switch can reach 7A, making the contacts prone to sparking and burning out under high temperatures. The original reverse light switch has a service life of only one month. Due to the confined installation space, replacement is inconvenient, time-consuming, and labor-intensive.

20

0

Share

Where is the MG EZS produced?

MG EZS is produced in China. MG EZS: The MG EZS is the first all-electric model launched by SAIC MG, with dimensions of 4314/1809/1620mm (1644mm with roof rack), which is 4mm lower in height compared to the fuel-powered version; the wheelbase remains unchanged at 2585mm. MG EZS Powertrain: The MG EZS is equipped with SAIC's latest generation of high-performance sports-grade electric motor, the first in the industry to adopt Hair-pin winding design, capable of delivering an impressive 110kW maximum power and 350N.m peak torque, achieving 0-50km/h acceleration in just 2.8 seconds. It also features an EDS intelligent electric drive system, VCU high-efficiency intelligent electric control system, CATL high-energy-density anti-degradation lithium battery, and an intelligent battery temperature management system.

19

1

Share

What's the reason when the window button doesn't respond?

Why Does the Audi Brake Pad Make Noise?

Can a 26-ton three-axle truck drive on the highway?

Where is the engine control module located in the BMW 5 Series F18?

What Causes the Skoda Octavia Remote Control Window Switch to Malfunction?

How many reverse lights are illuminated on the new Lavida?

Where is the MG EZS produced?

Where is the reset button on the Audi TT?

Where is the Toolbox Located in a BMW 5 Series?

What transmission does the new Kia KX5 use?

How to Deal with Jaguar XJ Suspension Failure?