···
Log in / Register

What's the reason if the car air conditioner won't turn on?

3 Answers
SanEthan
07/29/25 7:37pm
The reasons why the car air conditioner cannot be turned on are as follows: 1. Airflow direction selection: Incorrect airflow direction selection in the car air conditioner may prevent it from turning on. 2. Blower motor failure: A faulty blower motor can result in reduced airflow from the vents, and in severe cases, may cause the air conditioner to fail to turn on. It must be inspected and repaired at a 4S shop. 3. Dirty air filter: A dirty air filter can obstruct the airflow from the air conditioner. Car owners can regularly clean the air filter by using a vacuum cleaner to remove dust from the filter or by using an air compressor gun. If the filter is excessively dirty, it is recommended to replace it. The replacement cycle for the air filter is 10,000 kilometers or six months.
Was this review help?
20
0
Share
JuniperLynn
08/14/25 2:47pm
I've been driving for twenty years, and the issue of the air conditioning not turning on is quite common. That time when I encountered it, I found that pressing the switch had no response, so I opened the hood to check the fuse box. After looking at the manual, I saw that the fuse corresponding to the air conditioning was blown, and replacing it with a new one fixed the problem. If that's not the case, it might be poor switch contact or a burnt-out relay. Some cars have a protection feature that prevents the air conditioning from starting if the refrigerant has leaked, to avoid damaging the compressor. Low battery voltage can also cause startup failure—just use a multimeter to check the voltage. When it's unbearably hot in the summer, not having air conditioning is really tough. Check these areas first, and if that doesn't work, take it to a repair shop quickly to avoid problems on the road.
Was this review help?
2
3
Share
Expand All
DeSpencer
10/15/25 6:20am
As a car enthusiast who loves tinkering, I was really startled when the air conditioning failed to start last time. I figured the first thing to check would be the fuse, since a blown fuse is the easiest to fix. I rummaged through the tools in the glove compartment and had it sorted in minutes. If the fuse was fine, it might be the relay controlling the AC that got stuck, or the switch button aging with poor contact. With the hot weather now, an aging battery can also affect power output—I tested the voltage and sure enough, it was low. There could also be a settings issue; try turning the temperature knob all the way down to the lowest setting. Don’t slack on regular maintenance—cleaning the filters and the system can prevent a lot of issues, saving both money and hassle.
Was this review help?
11
4
Share
Expand All
More Forum Discussions

Does the Wuling Hongguang Mini have one or two reverse lights?

Wuling Hongguang Mini has one reverse light. Relevant information is as follows: 1. Note: When reversing, always check for pedestrians or electric vehicles behind you. Always reverse slowly to minimize potential hazards in case of accidents. 2. Turning around: When making a U-turn on wider roads, you can directly judge the position of the rear or wheels on the road through the rearview mirror. On narrower roads, if you cannot accurately determine the position of the rear and rear wheels from the rearview mirror, you can open the door and observe the rear wheels while operating. When making a U-turn at intersections or street corners, expand your view and range of the rear, pay attention to the movement of passing vehicles, pedestrians, and bicycles, and reverse carefully.
14
5
Share

Does replacing the oil temperature sensor require removing the transmission?

Replacing the oil temperature sensor does require removing the transmission. The transmission oil temperature sensor is installed on the valve plate inside the transmission oil pan. Its main function is to detect the temperature of the automatic transmission hydraulic oil. When removing the transmission, be careful not to pull hard on the wiring harness on the valve plate. The testing method for the oil temperature sensor is as follows: 1. Measure the resistance value of the oil temperature sensor: Remove the transmission oil temperature sensor, place the sensor in a beaker filled with water, heat the water in the beaker, and measure the resistance between the two terminals of the sensor at different temperatures. 2. Standard resistance value for the sensor: Compare the measured resistance value with the specified value. If the resistance value differs significantly from the specified value, it should be replaced.
8
4
Share

How often should the CVT transmission fluid be changed in the Nissan Qashqai?

Nissan Qashqai CVT transmission fluid generally needs to be replaced every 80,000 to 100,000 kilometers or every 5 to 6 years. Symptoms of deteriorated transmission fluid in the Nissan Qashqai: 1. Slipping: The engine speed increases, and slipping occurs under high-torque conditions such as uphill driving. 2. Oil leakage: Poor sealing of the transmission, possibly due to issues with gaskets or seals. 3. Jerking: The main cause may be deteriorated transmission fluid containing dirt or impurities. 4. Abnormal noises: Excessive debris or impurities in the transmission fluid. 5. Overheating: The dashboard will display a transmission fault warning light. 6. Stalling: The engine stalls when shifting from P to D gear. Possible failures include the solenoid valve, lock-up control valve, or input shaft speed sensor.
4
3
Share

Where to Get a Car Natural Gas Tank Inspection?

Local Special Equipment Inspection and Research Institute (Special Inspection Institute) gas tank inspection stations conduct cylinder inspections. Here are the relevant details: 1. Material Proof: For inspection, you need to bring the gas tank usage registration certificate from the oil-to-gas conversion, the gas tank factory qualification certificate, the gas tank installation supervision inspection certificate, the vehicle's driving license, and the owner's ID card to the Special Inspection Institute for inspection. For details, you can inquire by calling the local Special Inspection Institute. 2. Pressure Equipment: A gas tank is a type of pressure equipment with explosion hazards, and its contained medium is generally flammable, explosive, toxic, highly corrosive, etc. Its usage environment, due to characteristics like mobility, repeated refilling, non-fixed operators, and changing usage conditions, makes it more complex and harsh compared to other pressure vessels.
15
1
Share

How to Release the Audi Handbrake?

Audi electronic handbrake can be released by simply pressing down the electronic handbrake switch. Below is the related introduction: 1. Working Principle: The electronic handbrake is a technology that achieves parking braking through electronic control. Its working principle is the same as that of the manual mechanical parking brake system, which realizes parking by clamping the friction between the brake shoes and the brake drum or between the friction pads and the brake disc. However, the control method is replaced by electronic buttons and motor actions instead of the original manual operation. Therefore, the full name of this system is the electronically controlled mechanical parking brake system. 2. Advantages: The advantages of the electronic parking brake system are that the parking brake handle is eliminated in the cabin, providing more design space for the overall interior styling. The parking brake is replaced by a button instead of the driver's effort to pull the parking brake handle, which is simple and labor-saving, reducing the operation intensity of the driver, especially female drivers.
17
3
Share

Where is the engine number located on a Volvo XC60?

Volvo XC60's engine number is located on the engine block. It typically consists of a combination of 7 to 8 digits and letters. In addition to the above method, the engine number can also be checked through the following 4 ways: The vehicle's driving license contains the engine number, usually printed on the second-to-last line; The motor vehicle registration certificate will state the engine number; The car purchase invoice will indicate the engine number; The vehicle purchase tax payment certificate will also state the engine number. It's important to note that the engine number is not the same as the engine model. The engine model refers to the specifications and size of the engine within the manufacturer's range, and engine models can be the same. The engine number, however, refers to the production serial number of the engine. Each engine can only have one unique engine number, and no two engines share the same number.
5
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.