What's the reason for the oil pump not making noise after turning on the diesel heater?

2 Answers
LeLydia
07/29/25 8:12am
The reason the oil pump does not make noise after turning on the diesel heater is due to damage or blockage of the oil pump. Solution: Remove the oil pump and clean it. If it is damaged, replace it with a new one directly. The diesel heater, also known as a parking heater, is suitable for preheating diesel engines in cold regions, effectively solving issues such as engine failure to start or difficulty starting due to cold weather. Circulation components of the diesel heater system: The diesel heater system consists of two cycles: a combustion cycle and a heating cycle. Solution: In the combustion cycle, the oil pump draws diesel from the fuel tank to the combustion chamber, where it is ignited by the igniter. The large amount of heat generated by diesel combustion is transferred through the aluminum alloy fins on the outer wall of the combustion chamber, and the exhaust gas is discharged from the exhaust port. In the heating cycle, the fan draws in external cold air, which passes through the aluminum alloy fins on the outer wall of the combustion chamber and is heated into high-temperature air, then delivered to the cabin to increase the temperature inside.
Was this review help?
10
0
Share
Lynne
08/12/25 11:24am
I once encountered this situation when driving a truck. After turning on the diesel heater, the fuel pump wouldn't make a sound. I immediately realized that the first things to check were the fuel line and electrical circuit, because a silent fuel pump usually indicates a fuel supply issue, like insufficient fuel or a clogged fuel line. Back then, my tank was nearly empty, and I kept trying, which ended up damaging some components—a costly mistake. Another common culprit is a blown fuse, which is hidden in a small box under the dashboard and requires manual inspection. Replacing it isn't hard, but you must match the correct model to avoid short circuits. If the fuel pump motor is aging or jammed by debris, it can also go silent. In such cases, you'd need to disassemble and clean it, but I'd advise beginners not to tinker with it recklessly—safety first. I usually have a mechanic check the fuel pump during routine maintenance. Frequent use of diesel heaters in winter can lead to this issue, so address it early to avoid getting stranded on the road, which would delay your trip and cause unnecessary hassle.
Was this review help?
4
0
Share
Expand All
More Forum Discussions

What are the symptoms of fuel injector leakage?

The fuel injector is an electromagnetic valve that controls the formation of fuel spray into the engine by opening and closing, which helps the fuel burn more fully. The symptoms of fuel injector leakage are as follows: 1. The engine idles unevenly; 2. Gasoline dripping into the cylinder will make the mixture too rich, making it difficult to start the engine; 3. The engine noise increases; 4. The throttle response is not sensitive, and acceleration is unstable; 5. Black smoke comes out of the exhaust pipe, and the piston rings wear out faster. The causes of fuel injector leakage are as follows: 1. The contact surface between the injector hole and the needle valve is incomplete under the action of the pressure regulating spring; 2. The pressure spring loses its function, resulting in insufficient closing pressure; 3. Poor filtration of gasoline.
2
2
Share

Difference Between Mercedes-Benz and Beijing Benz?

The difference between Mercedes-Benz and Beijing Benz lies in their production origins: Mercedes-Benz is purely imported, while Beijing Benz is a joint venture between DaimlerChrysler and Mercedes-Benz (only the engine is imported, with other components assembled domestically). Below are the specific introductions to Mercedes-Benz and Beijing Benz: 1. Mercedes-Benz is a luxury and high-performance German automotive brand headquartered in Stuttgart, Germany, and is a member of the Daimler AG group. 2. Beijing Benz is a Sino-German joint venture engaged in automotive research, production, and sales, established in 2005 with its headquarters in Beijing. Its business scope includes: manufacturing passenger vehicles and their components, researching and selling passenger vehicles and their components, import and export of goods, import and export agency, and technology import and export.
6
4
Share

How long are the brake marks at 60 km/h?

At a speed of 60 km/h, under normal circumstances, the braking distance can range from 9 meters to 15 meters depending on the vehicle model. The braking distance of every vehicle model on the market should comply with the following national regulations: 1. For vehicles with a total mass not exceeding 4.5 tons, the braking distance should not exceed 21 meters at a speed of 50 km/h. 2. For passenger vehicles with no more than nine seats, the braking distance should not exceed 19 meters at a speed of 50 km/h. 3. For other vehicles, the braking distance should not exceed 9 meters at a speed of 30 km/h. The main factors affecting braking performance include the following: 1. The performance of the brake calipers. Generally, the more pistons a brake caliper has, the better its braking performance. Additionally, the wear of brake pads and brake discs can significantly impact braking efficiency. Therefore, worn components of the braking system should be replaced regularly. 2. The grip performance of the tires. The grip performance of tires determines the friction between the tires and the road surface. Better grip results in higher friction and shorter braking distances. 3. The smoothness of the road surface. It is normal for braking to be ineffective on icy roads in winter, as the friction on ice is very low. Therefore, winter tires or snow chains should be used in northern regions during winter. 4. Brake temperature. If the brakes are continuously applied during long downhill descents, the temperature of the brake discs will rise sharply. This can lead to brake fade, which significantly reduces braking efficiency. Therefore, engine braking should be utilized more during long downhill descents.
4
1
Share

How to Turn Off the Radio in a Sagitar?

The FM/AM button located at the top-left corner of the dashboard screen in the Volkswagen Sagitar serves as the radio power switch. To turn off the radio, simply press this button once with your finger. If you wish to turn the radio back on, locate the same power button and press it again to activate the radio screen. Relevant information about car radios is as follows: 1. A radio is a compact wireless receiver (also called wireless or broadcast receiver) composed of mechanical components, electronic parts, and magnets. Its primary function is to receive broadcast programs from radio stations by tuning into radio transmitter signals. 2. Radios are generally categorized by wavebands: dual-band (FM & MW), dual-band (shortwave & FM), dual-band (shortwave & MW), 3-4 multi-band radios (FM, MW 1-2, shortwave), 5-14 multi-band radios (FM, MW 3-12 shortwave), and full-band receivers. Single-band and dual-band radios are less common in the market, while multi-band radios integrating FM, MW, and shortwave frequencies dominate.
1
5
Share

How to Diagnose a Leaking Trunk?

Diagnosis and solutions for a leaking trunk are as follows: A trunk leak is usually caused by a faulty seal or damage/deformation to the trunk itself, or possibly a blocked drainage hole. The solutions include: 1. First, drain the water. There is a rubber plug at the bottom of the spare tire compartment in the trunk; remove it to allow drainage. 2. Locate the leak. Check if the trunk lid is deformed or if the surrounding rubber seals have aged. Close the trunk and observe where light comes through, then mark those spots. 3. Purchase a bottle of silicone sealant, open the trunk, remove the interior trim panel, and apply the sealant to the marked areas. The rear bumper may also need to be removed. 4. For aged or damaged rubber seals, visit an auto repair shop to have them replaced.
3
2
Share

What engine does the Chery Tiggo 3 use?

Tiggo 3 is equipped with a 1.6L-DVVT engine. Here are the relevant details: 1. The Tiggo 3 continues the advantages of the old Tiggo in terms of power matching, combining both power and fuel economy. It features a 1.6L-DVVT engine with continuous variable valve timing technology, paired with a 7CVT transmission and a 5MT transmission. 2. This powertrain system has undergone extensive market testing and has consistently maintained an excellent reputation for reliability and durability. 3. On this basis, Chery has further optimized the powertrain of the Tiggo 3. After re-optimization, the Tiggo 3's powertrain performs even better in terms of fuel economy and smooth handling. The 5MT version has a combined fuel consumption of only 6.7L per 100 kilometers, a result that even surpasses the fuel consumption levels of most joint-venture SUVs in the same class.
4
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.