···
Log in / Register

What's the reason for the Jinbei vehicle's sluggish acceleration and muffled performance when refueling?

3 Answers
DelEverett
07/29/25 10:14pm
This situation may occur due to damage to certain sensors around the engine, or damage to certain components around the engine. The most likely causes are a faulty throttle body or mass air flow sensor. Here is additional information: 1. Engine fuel system: The engine fuel system is a common problem area in vehicles. Clogged fuel injectors, leaking fuel lines, reduced fuel pump power, or a blocked fuel filter can all lead to poor vehicle performance. In addition to fuel, the engine also requires air. If components like the air filter or throttle body are clogged or malfunctioning, resulting in insufficient air intake, it can also cause sluggish acceleration and slow speed increase. 2. Crankshaft position sensor failure: This can cause the vehicle to lose the timing of ignition and fuel injection, putting the vehicle into a limp mode with poor acceleration. Replacing the sensor can fix the issue. A damaged fuel pump or fuel pump pressure leakage, leading to insufficient fuel pressure and inadequate fuel supply, will naturally result in poor acceleration. Replacing the fuel pump can resolve this. A clogged fuel pump filter can also cause insufficient fuel pressure, and replacing the filter can fix the problem.
Was this review help?
14
3
Share
DiHector
08/15/25 10:36pm
This Jinbei vehicle is struggling to accelerate and feels sluggish when refueling, which sounds like a clogged exhaust system or restricted air intake. I've encountered a similar situation before, and it turned out to be a completely blocked catalytic converter. The exhaust couldn't escape, making the car feel sluggish and lacking power during acceleration. You should first check if the air filter is dirty. If there's too much dust, air can't get in, and the engine will naturally lack air, causing it to feel sluggish. The fuel system also needs inspection—for example, a clogged fuel pump or fuel line can lead to incomplete combustion. I recommend stopping the vehicle and either cleaning the filter or replacing it. If the issue persists, don't push it—take it to a repair shop for professional diagnostics with specialized equipment. Preventive maintenance is crucial; regularly checking these components can help avoid major problems.
Was this review help?
11
2
Share
Expand All
SanRylee
10/17/25 8:30am
I've experienced this issue with a Jinbei van before. When accelerating, the car feels sluggish and lacks power, which is usually caused by a decline in engine performance. It could be due to worn-out spark plugs, resulting in poor ignition efficiency and incomplete combustion, leading to insufficient power. Alternatively, the fuel injectors might be clogged, preventing proper fuel spray and making the car feel sluggish and unable to accelerate. I recommend using a multimeter to check if the electrical circuit is functioning properly, and then inspect the fuel supply lines for any leaks. If the issue lies with the catalytic converter, it's best to replace it promptly. Ignoring such faults could potentially damage the engine internals. Keep an eye on fuel consumption while driving—if it suddenly increases, be alert. When getting repairs, choose a reliable shop to avoid secondary issues.
Was this review help?
2
5
Share
Expand All
More Forum Discussions

How to reset the tire pressure monitoring on Audi A3?

First, start the ignition, locate the tire pressure monitoring system, and reset the tire pressure data. After successful setup, save the changes to clear the Audi A3 tire pressure monitoring alarm. Related information about the Audi A3: 1. The Audi A3 tire pressure monitoring is a hidden feature, equipped with a simplified tire pressure monitoring system that uses ABS sensors to detect deviations in tire rotation speed, thereby analyzing uneven tire pressure. It does not have tire pressure sensors, so the tire pressure cannot be viewed. 2. The Audi A3 (Audi-A3) is a car produced by Audi, available in both hatchback and sedan models. It features a compact and sporty design, with parking assistance, a panoramic sunroof, ample headroom, a solid chassis, and is equipped with a 7-speed dual-clutch transmission and a manual-automatic integrated transmission across all models.
9
5
Share

What transmission does the Honda Haoying use?

Honda Haoying uses a CVT transmission, which is commonly found in most Japanese automatic cars. The structure of a CVT mainly consists of two sets of pulleys (drive pulley and driven pulley), a transmission belt (steel belt), oil pump, torque converter, actuators (valve body, oil circuit), sensors, computer, etc. The advantages of a CVT transmission are as follows: 1. Good fuel economy: CVT can achieve continuously variable transmission over a wide range, obtaining the best match between the transmission system and engine conditions. It relies on the stepless speed regulation of the transmission to adapt to various vehicle speeds, allowing the engine to operate under optimal conditions for long periods, thus improving engine combustion efficiency and fuel economy accordingly. 2. Good comfort: CVT can improve driving comfort. 3. Good handling: The CVT transmission matches with the torque converter, which can amplify engine torque, resulting in quick starts and smoother acceleration.
8
1
Share

How to use the lights on an Audi A3?

Audi A3 lighting operation instructions are as follows: 1. Turn signals and parking lights: With the ignition switch on, rotate the control lever to the corresponding turn signal or parking light position to activate the respective lights. A brief tap of the lever will trigger three flashes. 2. High beam and high beam flash function: Move the lever to the corresponding position, and the high beam indicator will illuminate on the instrument cluster. 3. Fog lights: The fog light switch is located below the left side of the steering wheel. Simply press the corresponding button to activate. 4. Automatic headlights, low beams, and position lights: When the AUTO button is lit, it indicates the automatic headlights are active. With AUTO illuminated, press once to activate low beams, press again for position lights, and press once more to turn off. 5. Headlight cleaning: With headlights on, activating the windshield washer switch will clean the headlights. With headlights off, it only cleans the windshield. 6. Adaptive headlights: Adjust to AUTO position.
5
3
Share

How much fuel can the Sylphy hold?

Under normal circumstances, the Sylphy can hold 47L of fuel. The refueling steps are as follows: first, turn off the engine, then open the fuel cap to fill up with gasoline. Here are some relevant details: 1. Taking the 2021 manual comfort version Sylphy as an example, its body dimensions are 4631mm in length, 1760mm in width, and 1503mm in height, with a wheelbase of 2700mm and a trunk capacity of 510L. 2. The 2021 manual comfort version Sylphy features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.6L naturally aspirated engine, delivering a maximum horsepower of 122ps, a maximum power of 90kw, and a maximum torque of 155Nm.
2
1
Share

How to Turn on the Rear Air Conditioning in the Boyue?

Adjust the air conditioning mode to the upper vent position, and the rear seats will receive cool air. The heating switch for the Geely Boyue is located at the recirculation knob on the air conditioning control panel. To activate the heating, first start the car and wait approximately 8-15 minutes until the water temperature reaches the normal level, then you can turn on the heater. Here are some relevant details about the Boyue: 1. Adjust the air circulation mode to internal recirculation, then use the temperature control to increase the temperature. The Boyue has a very user-friendly feature, which is the rear air vents. However, these vents only provide cooling and do not have a heating function; they simply recirculate the air inside the cabin. 2. In winter, when you first start the Boyue's engine, there will be no warm air (as the radiator temperature is not high enough to heat the air and blow warm air). If you turn on the heater at this time, the engine will accelerate its warm-up process by adjusting the ignition timing to generate more heat and warm up the antifreeze in the radiator, which will significantly increase fuel consumption. However, once the engine's water temperature rises and you then turn on the heater, the fuel consumption will increase only slightly, as the heating system utilizes the engine's waste heat.
2
3
Share

Does the Baojun 510 have one-touch window lift function?

Baojun 510 does not have one-touch window lift function. Below is an introduction to the Baojun 510: Body dimensions: Length 4780mm, width 1780mm, height 1740mm, wheelbase 2750mm, fuel tank capacity 52 liters. Powertrain: Equipped with a 1.5T turbocharged engine. Maximum horsepower is 147PS, maximum power is 108kW, maximum torque is 250Nm. Below is extended information about the Baojun 730: Body dimensions: A 5-door 7-seater MPV under SAIC-GM-Wuling, with length/width/height of 4780mm/1780mm/1740mm and wheelbase of 2750mm. Transmission: Equipped with 6-speed manual transmission, with top speed reaching 150km/h.
8
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.