What's the reason for the car screen not lighting up?

1 Answers
OJason
07/29/25 6:34pm
The main reasons for the car screen not lighting up are as follows: 1. Poor line contact. It is necessary to check whether there is a loose connection in the line in time. 2. The power signal line is aging. You can try to replace it with a new one. 3. The screen has been used for too long, causing the power supply module to malfunction. Not only will there be lag, but in severe cases, a black screen will appear. Extended content: The car display screen not only provides information such as navigation, reversing images, and vehicle fuel consumption for viewing, but also has many multimedia entertainment systems for operation. It can be said that it provides convenience for the people in the car while also improving the visual experience inside the car. However, if the car display screen fails, the inconvenience it will bring to the driver will be obvious. Therefore, if there is a problem, it should be checked and repaired in time.
Was this review help?
4
1
Share
More Forum Discussions

How Much Engine Oil Should Be Added to a Car?

It is appropriate to add engine oil between the upper and lower limits on the dipstick, and it should not be below the middle mark. This is because high-speed driving can cause the engine to heat up, making the oil thinner. If the oil level is too low, it will reduce lubrication and cooling effectiveness. Engine oil, also known as motor lubricant, consists of: 1. Base oil: The main component of lubricating oil, determining its fundamental properties; 2. Additives: These compensate for and improve any deficiencies in the base oil's performance. The functions of engine oil include: 1. Cooling and temperature reduction; 2. Sealing and preventing leaks; 3. Cleaning and removing contaminants; 4. Damping and shock absorption; 5. Lubrication to reduce wear; 6. Rust and corrosion prevention; 7. Protecting engine components.
18
2
Share

Is the first maintenance of GAC Honda available nationwide?

The first maintenance of GAC Honda is available nationwide. You need to bring your vehicle license and maintenance manual. The first maintenance items include: 1. Changing the engine oil and oil filter; 2. Cleaning the air filter; 3. Checking the levels of various fluids; 4. Inspecting the generator belt; 5. Checking the wiper blades for damage; 6. Verifying the tire pressure. GAC Honda models include: Avancier, Vezel, Odyssey, Fit, Accord, Crosstour, City, and Lingpai. Taking the 2020 GAC Honda Avancier as an example, it is a 5-door, 5-seat midsize SUV with body dimensions of 4858mm in length, 1942mm in width, and 1670mm in height, and a wheelbase of 2820mm.
6
2
Share

How to Remove the Rear Seats of a Buick GL8?

The method to remove the rear seats of a Buick GL8 is as follows: 1. On both sides of the rear seat headrest, near the window area, there are pull handles; 2. Pull the handles, and the backrest of the rear seats can be folded forward; 3. For the cushion part of the rear seats, in most cases, you just need to push the cushion towards the rear of the vehicle and lift it upwards to complete the removal. The Buick GL8 is a 5-door, 7-seat MPV with body dimensions of: length 5238mm, width 1878mm, height 1776mm, and a wheelbase of 3088mm. The Buick GL8 is equipped with a 2.0T turbocharged engine and a 9-speed automatic transmission, delivering a maximum power of 174 kW and a maximum torque of 350 Nm.
12
5
Share

What to Do When Your Car Breaks Down?

Park the car in a safe area, set up the warning triangle, and inform the following vehicles to detour as there is a car breakdown here. While waiting for rescue, do not sit in the car or stand right in the middle of the road. Keep a safe distance from the car to protect yourself.
16
4
Share

Where is the Prado jack and how to take it out?

Prado jack is located in the trunk. There is a square cover on the left side that can be pulled down and opened to see it. Use the tools in the trunk to loosen the jack and take it out. Prado is also called Land Cruiser Prado. Taking the 2019 Prado Automatic Premium Edition as an example, it is a mid-to-large size 5-door 7-seat SUV with body dimensions of 4840mm in length, 1885mm in width, and 1890mm in height, with a wheelbase of 2790mm. The 2019 Prado Automatic Premium Edition is equipped with a 3.5L naturally aspirated engine, with a maximum power of 206kW and a maximum torque of 365N·m. The front suspension uses a double-wishbone independent suspension, and the rear suspension uses a four-link non-independent suspension.
1
2
Share

What are the reasons for the car not moving when the transmission is engaged?

The reasons for the car not moving when the transmission is engaged are: clutch, transmission, and drive axle failures. It is advisable to promptly take the vehicle to a repair shop for inspection. Regular maintenance of the transmission can be performed in the future, including timely replacement of the transmission oil and filter. When changing the transmission oil, the interior of the transmission can also be cleaned. The main functions of the transmission are: 1. To change the transmission ratio, expanding the range of torque and speed variations of the driving wheels to adapt to frequently changing driving conditions, allowing the engine to operate under favorable conditions; 2. To enable the car to reverse while maintaining the same engine rotation direction; 3. To interrupt power transmission by using neutral gear, allowing the engine to start, idle, and facilitating gear shifting or power output.
17
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.