What's the reason for not being able to shift gears?

1 Answers
JasonLynn
07/29/25 12:01pm
The reasons for not being able to shift gears: 1. The clutch is not fully depressed: For manual transmission vehicles, some models require the clutch pedal to be fully depressed to engage the gear. Simply pressing the clutch pedal deeper can solve this issue; 2. Transmission malfunction: If the vehicle's transmission is problematic, it is recommended to have it inspected at a 4S shop; 3. Gear teeth alignment: Many vehicles' reverse gears are not equipped with synchronizers. Therefore, when attempting to engage reverse, the teeth of two gears might align precisely, causing the gear to get stuck and preventing reverse engagement. In this case, simply shift into a forward gear again, then try engaging reverse once more.
Was this review help?
10
5
Share
More Forum Discussions

What are the symptoms of water ingress in a tricycle motor?

The reactions of water ingress in a tricycle motor can be observed from visible faults, increased noise, and hidden faults. Below is additional information: Visible faults: The motor fails to work, and there may be bearing damage, increased noise, or even severe cases of burned-out coils. Hidden faults: Parts of the motor may rust extensively, leading to magnetic pole short circuits, decreased insulation performance of the coils, etc. The motor's current will continuously increase, and secondary faults will keep accumulating, ultimately requiring motor replacement. Checking the bearings: Remove the motor, dry it either by heating or sun exposure, and remove any rust. Use the finest sandpaper to polish the rotor and stator to prevent friction, and inspect the bearings.
9
5
Share

How often should the Mercedes-Benz engine coolant be changed?

Mercedes-Benz engine coolant should be changed every two years or every 40,000 kilometers. Introduction to the engine: An engine (Engine, motor) is a machine that can convert other forms of energy into mechanical energy, including internal combustion engines (such as gasoline engines), external combustion engines (such as Stirling engines, steam engines), electric motors, etc. Structure of the engine: The engine block is the framework of the engine and serves as the installation base for all the mechanisms and systems of the engine. It houses all the main components and accessories of the engine, both internally and externally, and bears various loads. Therefore, the engine block must have sufficient strength and rigidity. The engine block assembly mainly consists of components such as the cylinder block, cylinder liner, cylinder head, and cylinder gasket.
19
2
Share

Is there a time limit for driver's license suspension?

There is no time limit for driver's license suspension. Below is relevant knowledge about driver's licenses: The process for replacing a lost driver's license: The concerned party should bring their ID card and a copy, the application form for replacing the driver's license, and two small one-inch color photos. Simply go to the vehicle management office, first request an application form for replacing the driver's license from the staff, fill in the contents on the form, then wait for the computer to call your number in order. Submit the application form and the two small one-inch color photos to the officer at the licensing window. The officer will immediately check the computer records. After verifying the situation, the officer can promptly accept the application from the concerned party. The concerned party then goes to the payment window to pay the licensing fee. Afterward, the officer at the licensing window will issue a temporary license valid for one month to the concerned party. One month later, the concerned party can return to the licensing window at the vehicle management office to collect the replaced driver's license. There are two points to remind the concerned party to note: If the driver's license to be replaced has less than three months before it expires and needs to be renewed, the renewal procedures should be handled simultaneously; after obtaining the replacement license, if the original license is found, it should be actively and promptly returned to the issuing authority. Otherwise, it will be considered as holding dual licenses, and the vehicle management department of the public security bureau will cancel them according to regulations. International driver's license: An international driver's license is not a driver's license. It is merely a document issued by the official agency of the driver's home country or other authorized agencies, based on the United Nations Road Traffic Convention that the country's government has joined, in the standard format specified by the convention and in multiple languages, to certify that the driver holds a valid driver's license from that country. Its main purpose is to help police in other countries understand the driver's name, address, permitted vehicle types, and other necessary information.
9
4
Share

What are some seven-seater cars?

Seven-seater cars include the Volkswagen Teramont, Toyota Highlander, Mitsubishi Outlander, and Dongfeng Fengguang 580. Here is the relevant information: Volkswagen Teramont: The exterior still adopts Volkswagen's family "standard face," giving an overall impression of ruggedness and grandeur, full of strength. However, its actual dimensions are even larger than its sibling, the Touareg, with a length, width, and height of 5039x1989x1773mm and a wheelbase of 2980mm. The length exceeds 5 meters, the width is close to 2 meters, and the height is nearly the limit for underground garage entrances. Toyota Highlander: The Highlander's 2.0T engine delivers a maximum output of 220ps and a maximum torque of 350Nm. The over-2-ton body feels sluggish at startup, but power improves after the engine reaches 1700rpm. It is paired with an Aisin 6AT transmission. The body dimensions are 4890x1925x1720mm, with a wheelbase of 2790mm. Mitsubishi Outlander: It adopts Mitsubishi's latest Dynamic Shield design language, making it more robust and powerful, with solid waistlines and dynamic 225/55R18 tires. The Outlander is equipped with a 2.0L or 2.4L naturally aspirated engine, with the 2.0L engine delivering a maximum power of 166ps. Dongfeng Fengguang 580: It is powered by a 1.5T or 1.8L engine. The 1.5T model has a maximum power of 150ps and a maximum torque of 220Nm, while the 1.8L engine delivers a maximum power of 139ps and a maximum torque of 187Nm. The transmission system includes a 6-speed manual or CVT continuously variable transmission. The body dimensions are 4680x1845x1715mm, with a wheelbase of 2780mm.
1
3
Share

What causes the odor in Mercedes-Benz GLC?

Mercedes-Benz GLC odor may be caused by various smells such as glue, leather, plastic, or smoke, which can mix and compromise the air quality inside the car, leading to substandard conditions. Specific causes of interior odors: It could be due to residues from eating or smoking in the car; or smells emitted by the interior materials in humid climates; it might also be caused by a long-uncleaned air filter that has become moldy and developed bacteria, producing odors. Simple ventilation to eliminate odors: Open the windows while driving to ventilate, and when parked, do not close the windows completely—leave a small gap to let odors escape. A brand-new car will inevitably have some smell, so avoid keeping the windows tightly closed and the air conditioning in recirculation mode for long periods while driving. Frequently opening the windows for air exchange is the best solution. If the car is parked for an extended period, it's best to leave a small gap in the windows to allow odors to dissipate quickly.
16
5
Share

What is the function of the small button on the Honda CR-V gear lever?

The small button on the Honda CR-V gear lever is the auto-hold switch. Auto-hold system: A function that automatically engages the handbrake. After activating this function, you do not need to pull the handbrake when stopping at traffic lights, making it suitable for uphill and downhill driving as well as frequent starts and stops. How to use the auto-hold function in a car: Fasten your seatbelt and activate the function while driving; when the vehicle comes to a complete stop, you can release the brake pedal; the dashboard will display a parking indicator, and the car will remain stationary while staying in D or N gear; lightly press the accelerator to release the brake. When exiting the vehicle, shift to P gear and then pull the handbrake. The auto-hold system will only release the brake when the driving force is greater than the reverse force that causes the car to roll, allowing the car to start directly.
11
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.