What's the reason for a motorcycle not responding when starting?

1 Answers
DiArya
07/29/25 12:59pm
Reasons for a motorcycle not responding when starting include: 1. Fuel level: Check if the fuel level is sufficient and whether the carburetor is receiving fuel. 2. Electrical circuit: Inspect the electrical circuit by removing the high-voltage wire from the spark plug, detach the high-voltage cap, and start the motorcycle with the cap about half a centimeter away from the cylinder body to see if there is electricity. If there is electricity, the spark plug might be damaged. Here is some related information: Motorcycle introduction: A motorcycle is powered by a gasoline engine and steered by handlebars to control the front wheel, typically a two or three-wheeled vehicle. It is lightweight, flexible, and fast, widely used for patrol, passenger and cargo transportation, and also as sports equipment. Broadly speaking, motorcycles can be categorized into street bikes, road racing motorcycles, off-road motorcycles, cruisers, touring bikes, etc.
Was this review help?
15
3
Share
More Forum Discussions

How to Set Up One-Touch Window Control in Sagitar?

The method to set up one-touch window control in Sagitar: Raise the window glass fully upward, then hold the switch for 3 seconds. Next, lower it completely and hold for 3 seconds. Repeat this process three times to complete the setup. The Sagitar comes standard with one-touch window control across all trims, which refers to a system allowing car windows to be fully opened or closed with a single button press. Taking the 2021 Sagitar Manual Fashion Smart Connect Edition as an example, its body dimensions are 4753mm in length, 1800mm in width, and 1462mm in height, with a wheelbase of 2731mm and a fuel tank capacity of 50 liters. This model is equipped with a 1.2T turbocharged engine delivering a maximum power of 85kW.
15
1
Share

How long after passing Subject 1 can you schedule Subject 4?

You cannot directly apply for Subject 4 after passing Subject 1. You must pass Subject 1, Subject 2, and Subject 3 before you can apply for Subject 4. Below is detailed information about the Subject 4 exam: 1. Overview: Subject 4, also known as the theoretical exam for drivers, is part of the motor vehicle driver's license assessment. The test consists of 50 questions, primarily in the form of case studies, images, and animations, with a full score of 100 and a passing score of 90. 2. Additional Information: Subject 4 separates the requirements related to safe and civilized driving from Subject 1, including safe driving skills under complex conditions and emergency handling knowledge. These are tested after the "Subject 3" practical road driving exam to further assess the candidate's traffic awareness and competence.
18
2
Share

What does a bulb with an exclamation mark on the dashboard mean?

Vehicle dashboard has a bulb with an exclamation mark is the lighting fault indicator, when this indicator lights up, it indicates that there is a fault with the exterior light bulbs, such as brake lights, license plate lights, width indicators, reverse lights, etc. being damaged, or loose connections. It is recommended to go to a 4S store for inspection and repair as soon as possible. The method for replacing car bulbs is: 1. Open the engine hood and locate the lamp cover behind the headlight assembly; 2. Unscrew the lamp cover; 3. Pull out the lamp socket with the power cord, pressing the bulb with your hand to avoid damage; 4. Release the lamp socket clip to remove the bulb, then install the new bulb. When reinstalling the lamp cover, make sure it is tightly screwed to prevent rain and dust from affecting the headlight's lifespan.
20
0
Share

Working Principle of a Four-Wire Brake Light Switch?

Four-wire brake light switches essentially consist of two switches in one: a normally open (NO) switch and a normally closed (NC) switch. When the brake pedal is pressed, the normally open switch closes (conducts), while the normally closed switch opens (stops conducting). Below are details regarding four-wire brake light switches: 1. Overview: A four-wire automotive brake light switch has one 12V power supply wire, two wires sending brake signals to the ABS system ECU and automatic transmission ECU respectively, and another wire leading to the rear brake indicator light. In some high-end models, the ABS and automatic transmission share a single wire, with an additional wire added for electronically controlled suspension brake signals. Thus, apart from the power wire, all other wires on the brake light switch connect to control units requiring brake signals, while the rear brake indicator is controlled by the vehicle's lighting system. 2. Testing Method: To check the functionality of a four-wire brake light switch, a multimeter is required. Set the multimeter to the diode test mode. Use the red and black probes to measure between the pins. If any two pins show continuity, they are the normally closed contacts. The remaining two pins are the normally open contacts.
14
5
Share

What is the reason for the car not starting and making abnormal noises?

The battery is faulty and cannot store power. If you can only hear the sound of the starter when trying to start the car, it is likely that the battery is dead and unable to start the car. The starter motor may also be faulty and unable to turn the flywheel. Check if the starter motor is working when attempting to start the vehicle. The reasons for the car not starting and making a clicking sound are as follows: 1. First scenario: If the car initially starts without issues but the starting time gradually increases until it suddenly fails to start one day, this is likely due to a problem with the engine's ignition system or fuel supply system. In this case, it is necessary to seek professional repair services. 2. Second scenario: If the car has always started well but suddenly fails to start one day, it is likely a battery issue, where the battery is dead and cannot supply power normally. 3. Third scenario: If the headlights can function normally, it is mostly due to an open circuit in the protective coil of the starter motor's solenoid switch.
1
3
Share

Can a BMW X1 Last for Ten Years?

If properly maintained on schedule, a BMW X1 can last for ten years. Here is a brief introduction about BMW: 1. Basic Information: BMW, the full Chinese name being Bavarian Motor Works, is a German luxury automobile brand. BMW's vehicle series include i, X, Z, and pure numeric models, with series such as 1, 2, 3, 4, 5, 6, 7, 8, and the M series (BMW's official high-performance modification division) based on improvements of these series. 2. Headquarters Address: BMW was founded in 1916, with its headquarters located in Munich, Bavaria, Germany. The blue and white logo of BMW represents the colors of the Bavarian state flag, where the headquarters is located.
1
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.