···
Log in / Register

What's the matter with the tire pressure warning on the Tiguan?

4 Answers
DiJulianna
09/04/25 8:05am

When the tire pressure warning appears on the Volkswagen Tiguan, it indicates an abnormal tire pressure condition, either too high or too low. It is recommended that the owner visit a nearby repair shop to identify the cause and take appropriate measures. Below is relevant information about the tire pressure warning: 1. If the tire pressure monitoring system warning light comes on while driving, remain calm, avoid panic, immediately reduce speed, refrain from sharp steering or sudden braking, and promptly check the tires. 2. If the owner carries a portable inflator, they can pull over to the roadside to measure and adjust the pressure for each tire. If not, drive slowly to the nearest service point or auto repair shop. 3. It is advisable to check tire pressure at least every three months, preferably when the tires are cool. Excessively low tire pressure risks damaging the tires, while pressure exceeding the standard value by 20% can shorten tire lifespan. Correct tire pressure helps save fuel. After regular use, inspect the tire surface for signs of aging, cracks, or foreign object damage. Clean the tires with plain water when possible. If using tire maintenance fluid, exercise caution and opt for high-quality products.

Was this review help?
13
4
Share
Geraldine
09/17/25 2:08am

I've been driving my Tiguan for several years, and the most common reason for the tire pressure warning light to come on is low tire pressure, which could be caused by colder weather or a slow leak. The system monitors pressure via wheel speed sensors or direct sensors, triggering an alert if it falls below the standard value. When this happens, don't rush to drive—find a safe place to park and use a tire pressure gauge to check all tires, including the spare. Inflate them to the standard 2.3-2.5 bar, then drive a few hundred meters to see if the light turns off. If it stays on, check whether the sensor battery is dead or if there's a foreign object puncturing the tire. Ignoring the warning may lead to unstable handling, increased fuel consumption, or even a blowout risk. I recommend checking tire pressure monthly, more frequently in winter, for peace of mind and safety. Some Tiguan TPMS systems require a reset, which is easily done through the infotainment menu.

Was this review help?
15
3
Share
Expand All
StEvangeline
10/31/25 2:37am

The tire pressure warning light on the Tiguan is on, most likely triggered by abnormally low or high pressure in one of the tires. This system operates in two ways: indirect systems use ABS sensors to detect differences in wheel speed, while direct systems use sensors to transmit signals. Causes include low pressure due to temperature fluctuations during cold starts, slow leaks, or sensor malfunctions. Don't panic—use the onboard air pump to check and adjust the tire pressure according to the standard values listed on the door frame label. If the light stays on, it could be due to a dead sensor battery or a false alarm, so visit a repair shop for a diagnostic check. Regularly checking tire pressure during maintenance can extend tire life and maintain fuel efficiency. Ignoring this issue can make steering heavier and significantly increase risks during high-speed driving, especially for larger SUVs like the Tiguan, where the heavier body weight makes the impact more pronounced.

Was this review help?
10
3
Share
Expand All
McValerie
12/14/25 2:45am

The tire pressure warning light is on in the Tiguan? It's mainly due to tire pressure issues, such as significant temperature changes or slow leaks caused by punctures. In this case, pull over to a safe location and manually check all tires. Try using an air pump to inflate them to the standard value. If the warning light persists, there might be an issue with the sensor, requiring professional inspection. Proper tire pressure is crucial for handling and fuel efficiency—don't ignore it to avoid vibrations while driving or increased fuel consumption. Regular checks can minimize such troubles.

Was this review help?
16
5
Share
Expand All
More Forum Discussions

What are the clever tricks for removing oil film from car windows?

Toothpaste is a clever trick for removing oil film. Toothpaste contains abrasive particles that can provide a grinding effect. When using toothpaste to clean oil film, it is important to apply the right amount of pressure and wipe evenly to better clean the pores on the glass surface and remove the oil film. Below are some related methods for removing oil film from car windows: 1. Using dry newspaper: After washing the car, use dry newspaper dipped in water to wipe the windows. Once the water on the newspaper dries, the oil film on the glass will also be removed. 2. Using specialized oil film cleaner: Spray the cleaner evenly on the glass, then wipe with a car wash towel or sponge for excellent cleaning results.
15
1
Share

What is the wading depth of the Range Rover Sport?

The maximum wading depth of the Range Rover Sport is 900mm. The wading depth of the Range Rover Sport is determined by the height of the vehicle's chassis, which is the ground clearance listed in the model's parameter configuration table. Generally, the greater the ground clearance, the higher the chassis, and the higher the safety factor when passing through waterlogged roads. Therefore, in terms of safe wading depth, the advantages of off-road vehicles and SUVs are obvious. However, for most compact and small cars with low chassis, the position of the vehicle's air intake should be used as a benchmark when passing through waterlogged roads. If the air intake is below the water level when the Range Rover Sport is wading, water will be sucked into the engine's cylinders. Since water cannot be compressed like air, it will cause serious damage to the engine's mechanical structure (connecting rods, pistons, crankshaft, etc.). Therefore, the wading depth should not exceed the height of the engine's air intake. The height of the engine's air intake, and thus the maximum wading depth, can also be increased by installing a snorkel. If wading is unavoidable, the following safe and correct operations should be performed: Before the vehicle enters the water, the auto start-stop function must be turned off to prevent the vehicle from automatically restarting after stalling in the water, which could cause serious damage to the engine due to water intake. Judge the underwater road conditions based on the passage of the vehicle ahead and choose a suitable entry point. Observe the path taken by other vehicles and follow their tracks at low speed, avoiding sudden acceleration or deceleration. On roads prone to waterlogging, observe warning water level markers, trees, and reference points such as the wheels and doors of other vehicles to judge the water depth before deciding whether to proceed. Understand your vehicle's safe wading depth. If the water depth exceeds half of the tire height or the engine's air intake, do not enter the water rashly; choose another route instead.
13
3
Share

What kind of scratches can car polishing repair?

Scratches caused by car washing or sand and stones during driving can be repaired by car polishing. Below is relevant information about car polishing: 1. Market position: From the perspective of car polishing, market demand is substantial, while supply is slightly insufficient. Particularly, there are not many enterprises with core intellectual property rights and high-quality products, resulting in an overall lack of brand effect in the industry. During periods of strong demand, the industry demand is enormous, and the development prospects are undoubtedly good. 2. Polishing steps: After the car surface is sprayed, minor defects such as coarse particles, sandpaper marks, flow marks, whitening, and orange peel may appear on the paint film surface. To compensate for these defects, grinding and car polishing are usually performed after spraying to improve the mirror effect of the paint film, achieving the requirements of brightness, smoothness, and brilliance.
10
0
Share

How to Separate Gasoline and Diesel After Mixing?

Gasoline and diesel can be separated using a thin-film evaporator. Below is an introduction to gasoline: 1. Physical and chemical properties: Gasoline is a colorless to light-yellow, easily flowing liquid at room temperature, hardly soluble in water, and flammable. Its distillation range is 30°C to 220°C, and it can explode when the air concentration reaches 74-123 grams per cubic meter. 2. Preparation method: Gasoline is produced through the fractional distillation of crude oil and the cracking of heavy fractions. During crude oil processing, units such as distillation, catalytic cracking, thermal cracking, hydrocracking, catalytic reforming, and alkylation all produce gasoline components, but with different octane numbers. For example, straight-run gasoline has a low octane number and cannot be used alone as an engine fuel. Additionally, the sulfur content varies, so gasoline components with high sulfur content require desulfurization refining. Subsequently, these gasoline components are blended, and high-octane components are added if necessary, resulting in a gasoline product that meets national standards.
18
3
Share

What are the consequences of driving a commercial vehicle without an operating license?

Driving a vehicle without an operating license on the road will not be penalized by traffic police as long as there are no traffic violations. However, engaging in commercial activities with an unlicensed vehicle constitutes illegal operation, which should result in vehicle impoundment and fines. This falls under the jurisdiction of the Transportation Bureau, not the traffic police. Below are detailed explanations about commercial vehicles: 1. Scope: Commercial vehicles refer to those approved by the competent authority at the end of the reporting period to participate in operations. This includes vehicles in good technical condition, under repair, awaiting repair, long-term parked, and those scheduled for scrapping but not yet approved by the superior authority. It does not include non-commercial vehicles of enterprises or borrowed passenger vehicles. 2. Classification: Commercial vehicles include passenger transport vehicles, freight transport vehicles, hazardous goods transport vehicles, and automobile trains.
14
5
Share

Why is one wheel of the car not turning?

If one wheel of the car is not turning, it is usually caused by the following reasons: 1. Pulling the handbrake tightly after washing the car: In winter, do not pull the handbrake tightly after washing the car, as this can easily cause the rear wheels to freeze, resulting in one tire turning while the other does not. 2. Not maintaining the wheel bearings: This can cause the bearing cage to deteriorate and lock the axle, leading to one tire turning while the other does not. 3. Rear wheels with drum brakes: There are two brake shoes inside. When the inner brake shoe is severely worn and not replaced in time, it can easily cause the brake shoe to lock, resulting in one wheel turning while the other does not. 4. Rear wheels with disc brakes: Check if the brake fluid circuit is blocked, causing the caliper to lock the brake disc, which results in one wheel turning while the other does not.
1
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.