···
Log in / Register

What's the matter with the Baojun recall?

4 Answers
DelEmersyn
09/09/25 3:52am

The reason for the recall is: potential fuel vapor leakage hazard, specifically due to manufacturing reasons by the supplier, some fuel tank vent hoses may age and crack after long-term use. Below is additional information: Brand Introduction: The Baojun brand is a passenger car brand tailored for global emerging markets, created by SAIC-GM-Wuling with over two decades of automobile manufacturing experience, incorporating eight years of joint venture expertise, and fully leveraging the advantages of SAIC, General Motors, and Wuling shareholders. Logo Design: The Baojun brand's logo design is consistent with the brand name "Baojun" in sound and form, using the "horse head" as the main element of the brand identifier, conveying meaning through form, and prominently reflecting the creative concept of integrating traditional Chinese elements with modern composition techniques.

Was this review help?
4
0
Share
VanSamuel
09/20/25 8:37am

I heard that Baojun recently recalled some models, apparently due to steering system issues in a certain SUV model that may fail at high speeds, increasing collision risks. As an owner, I immediately checked my Vehicle Identification Number (VIN) to confirm if it was within the recall scope. The official notice stated that affected models mainly involve Baojun RS-5s produced between 2021 and 2023, recommending owners to visit authorized 4S stores for free inspections and part replacements as soon as possible. I think such recalls are quite normal—manufacturers taking proactive responsibility ensures road safety. Ignoring them might turn minor issues into major hazards. I’ve developed a habit of regularly checking tires and brakes, and this recall reminded me to pay more attention to vehicle maintenance logs. Safe driving isn’t just a personal matter; it concerns family and other road users too. So, I scheduled a repair appointment right after receiving the notice, and the process went smoothly without much time spent.

Was this review help?
3
3
Share
Expand All
LeIan
11/04/25 2:13am

Baojun's recent recall is reportedly caused by an electrical system malfunction, specifically the motor controller potentially overheating leading to power interruption and affecting normal driving. As someone who enjoys studying automotive technology, I find such defects quite common—it's not just premium brands that encounter issues. The recall covers approximately 50,000 Baojun 530 vehicles manufactured after 2020. Owners are advised to check their VIN numbers via the official website or app for confirmation. The repair process is straightforward: dealerships will perform a software upgrade and reinforce wiring connections, taking less than two hours. I recommend everyone act promptly to avoid potential hazards. Meanwhile, learning basic vehicle maintenance skills, such as checking battery voltage, can help with daily prevention. Overall, automotive recalls reflect modern industrial progress—manufacturers have improved transparency, giving users greater peace of mind.

Was this review help?
15
2
Share
Expand All
PenelopeRose
12/18/25 2:13am

Baojun has recalled certain vehicles for their brake booster pumps, primarily the 2022 models, due to component aging that may lead to increased braking distance. As someone who has driven for many years, I understand the significant risks involved. Safety comes first, so I went to the dealership for a free and quick replacement upon receiving the notice. Don’t ignore this out of complacency—check if your vehicle’s model and production date are affected. Regular maintenance can greatly reduce such risks, and it’s simple to do.

Was this review help?
6
4
Share
Expand All
More Forum Discussions

How to Drive a Manual Transmission Car for Beginners

Methods for beginners to drive a manual transmission car: 1. Seating posture technique: After familiarizing with the vehicle, adjust the seat to the correct position, place the right foot lightly on the brake pedal, with an obtuse angle of about 120 degrees between the thigh and calf; 2. Starting technique: When starting a manual transmission car, press the clutch to the bottom and engage first gear, place the right foot hovering above the accelerator, slowly release the clutch while releasing the handbrake and gently pressing the accelerator, then immediately press the accelerator lightly after lifting the left foot pressing the clutch slightly; 3. Downhill technique: Do not coast in neutral when going down long and steep slopes, as relying solely on brakes makes it difficult to slow down quickly in emergencies; 4. Gear control speed technique: Use gears to replace partial braking when controlling speed, let the engine brake when going downhill, and avoid braking downhill; 5. Traffic light technique: When approaching a traffic light, judge the distance in advance, shift to neutral when the green light flashes, and coast to the intersection to wait for the red light.
13
0
Share

Which gear should be used for climbing a slope with a manual-automatic transmission?

When climbing a slope with a manual-automatic transmission, you should use the L gear. L stands for Low, which is the low-speed gear. When going downhill or descending a long slope, shifting into this gear limits the car's automatic shifting to only the lowest gear (equivalent to first gear in a manual transmission car). This allows the car to use engine braking when going downhill, preventing the driver from having to press the brakes for extended periods, which could overheat the brake pads and cause danger. Here is some related information about automatic transmissions: 1. Introduction: As the name suggests, an automatic transmission does not require the driver to manually shift gears; the vehicle automatically selects the appropriate gear based on driving speed and traffic conditions. A typical automatic transmission car has six gear positions, from top to bottom: P, R, N, D, S, and L. 2. Automatic principle: The engine's power is transmitted through the gearbox, which is also a key factor affecting fuel consumption. Generally, an automatic transmission consumes 10% more fuel than a manual transmission. Whether manual or automatic, the more gears there are, the more fuel-efficient the vehicle will be.
2
0
Share

Is a Dash Cam Easy to Install?

Whether a dash cam is easy to install depends on its structure. A single-lens dash cam is relatively simple to install, while a dual-lens dash cam is more complex. Below are the detailed installation steps: Dash Cam Installation Methods: For a single-lens dash cam, first determine the mounting position. Then route the cable along the inner edge of the roof trim, follow the rubber lining of the A-pillar, and run the wire along the floor mat or storage compartment to the cigarette lighter for power connection. On the other hand, installing a dual-lens dash cam involves more steps, including a longer power routing path and the need to remove more interior trim pieces. Therefore, it is recommended that owners visit a 4S shop for professional installation. Dash Cam Installation Notes: Since the distance between the camera and the dash cam body is significant, cable routing is the most complex part of the installation. To conceal the wiring, you can tuck the cable into the gap between the car body and the headliner from the rear, then route it along the gap between the windshield and the headliner at the front. Alternatively, you can run the cable under the cabin and hide it with the floor mat, though the power cable will inevitably be exposed at the front.
15
2
Share

What is the weight of the Levin?

The Levin has 13 models currently on sale, with a curb weight ranging between 1320-1430kg. It is a 4-door, 5-seater sedan with dimensions of 4640 1780 1455mm (length width height). In the same class, the Xingrui 2021 model has a curb weight of 1500kg. In terms of powertrain, the Levin 2022 185T series offers three models: Tech Edition, Sport Edition, and Luxury Edition. All are equipped with a 1.2L turbocharged engine and E-CVT continuously variable transmission. The engines feature 4 cylinders in a transverse layout, with front-wheel drive configuration. For other configurations, all or some models of the Levin 2022 185T series come with features including driver/passenger airbags, front/rear curtain airbags, ISOFIX child seat anchors, driving assistance imaging, rear cross-traffic alert, and drive mode selection. Note that this generation Corolla has two versions in China: FAW Corolla and Toyota Levin. The new Levin's Sport Edition adds a sport package featuring front/rear aerodynamic bumpers, a sporty mesh piano-black front grille, and sport-style exclusive seats. The gasoline Sport Edition also adopts a lowered body stance.
2
5
Share

What to do if the STOP light on FAW truck stays on?

If the STOP light on a FAW truck remains illuminated, you should check the water temperature, oil pressure, air pressure, engine, cab, etc. The STOP light will activate if any of these components malfunctions. Below is an introduction to the STOP light: 1. This light is connected to warning lights such as "oil pressure" and "brake fluid level" as well as the "coolant temperature gauge." If the light flashes while the engine is running, you must immediately stop and turn off the engine. 2. The oil pressure warning light is connected to the central STOP warning light. If this indicator lights up while the engine is running, accompanied by a buzzer sound, and the multifunction display shows "OIL-PRESSURE-INSUFFICIENT (engine oil pressure too low)," stop immediately. If the lubrication system is low on oil, refill it to the proper level. 3. The parking brake and low brake fluid level warning lights are connected to the STOP warning light. This light will illuminate every time the ignition switch is turned on.
20
5
Share

What to Pay Attention to When Taking Delivery of a Car?

When taking delivery of a car, it is necessary to check the engine, exterior scratches, and other aspects. Below are the specific precautions for vehicle inspection upon delivery: Inspect the body: Visually examine the paint surface of the car body to check for scratches and wear. Observe under sufficient sunlight to see if there is any color difference in the paint. Open the car door and push it to several angles to allow light to shine from different directions, checking if the sheet metal is even. Check the doors: Open the car doors and pay attention to whether they open and close smoothly. Check if the gaps between the doors and between the front and rear bumpers are consistent. Inspect the engine: Open the engine hood and check if the engine compartment is clean. If the car has been stored for a long time or used, there may be obvious dust or stains in some areas. Check the glass: Check if the windshield is original. Check the vehicle nameplate: The car nameplate is located on the side of the driver's door or inside the engine compartment. Pay attention to whether the manufacturing date is too far from the current date. If it exceeds six months, the car is likely to be a stock vehicle or a test drive car.
2
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.