What's the matter with maintenance-free battery not charging?

1 Answers
SanAustin
07/30/25 1:31am
Maintenance-free battery not charging may be due to internal disconnection or short-circuit damage. Maintenance-free batteries cannot be refilled with liquid as they lack refill ports. If the battery shows poor charge retention or fails to hold charge after charging, replacement is the only option. For maintenance-free batteries, adding electrolyte is not recommended as it disrupts internal mechanisms - the proper approach is regular charging. Two solutions: 1. Use a smart charger with activation mode. 2. Charge by connecting it in parallel with another charged battery. Additional details: 1. Maintenance-free batteries produce minimal gas during normal charging, feature strong overcharge resistance, low internal resistance, excellent cold-start performance, and longer lifespan than conventional batteries. 2. They require no distilled water refills during service life and need no supplemental charging when the charging system functions properly, though electrolyte specific gravity should be checked during maintenance.
Was this review help?
12
0
Share
More Forum Discussions

How to perfectly solve the steering gear noise issue in the Mazda Atenza?

The cause of abnormal noise when turning the steering wheel should be determined based on the specific location from which the sound originates. If the noise occurs only after activating the turn signal switch and then turning the steering wheel, it is likely the sound from the return spring of the turn signal auto-return mechanism. If the noise is heard from beneath the steering wheel whenever the steering wheel is turned, whether stationary or while driving, the steering column dust cover should be inspected. If the noise seems to come from beneath the steering wheel during rotation, it may be due to the universal joint in the steering column.
20
3
Share

How to Shift to Neutral (N) Gear When the BMW is Turned Off?

First, locate the position of the gear lever dust cover. After opening the gear lever dust cover, find the unlocking slot. Use a screwdriver from the vehicle toolkit to insert into the slot. Pull the screwdriver backward until you hear a click sound, then leave it inserted in the slot to unlock the transmission lock. You can then shift into Neutral (N) gear.
15
5
Share

What is the belt routing for the Zotye Z700?

Turn off the engine and let it cool down, then open the engine hood to locate the engine. Loosen the generator's main pulley shaft and the adjustment bolt of the generator. Adjust the pivot bolt. Pull the auxiliary pulley on the generator outward, then move the generator inward to release the belt. Align the generator's main pulley shaft to the correct position, place the generator's belt onto the main pulley shaft, and pull the generator outward. Place the generator's belt onto the two auxiliary pulleys. Adjust the pivot bolt. Install the generator's timing cover, and the generator belt will then be properly installed.
17
5
Share

How Often Should Car Antifreeze Be Topped Up?

Car antifreeze should be topped up approximately every 2 years or 40,000 kilometers. For commercial vehicles, the frequency of antifreeze replenishment should be more frequent. During routine car maintenance, it's important to monitor the antifreeze level. If the antifreeze level drops below the minimum mark, it should be replenished promptly. Antifreeze is a coolant containing special additives, primarily used in liquid-cooled engine cooling systems. It prevents the coolant from freezing during cold winter parking, which could otherwise cause the radiator to crack or damage the engine cylinder block or head. Antifreeze offers excellent performance in preventing freezing in winter, boiling in summer, and resisting scale and corrosion throughout the year.
16
4
Share

Why is the reversing radar not beeping?

The reasons why the reversing radar is not beeping: the circuit between the controller and the combination instrument is open or the buzzer in the instrument is malfunctioning. Troubleshooting methods for the reversing radar not beeping: 1. Check whether the reversing radar wiring at the rear bumper is properly connected; 2. Check whether the reversing light is on when the reverse gear is engaged. If not, check the reversing light switch; 3. Remove the right side lining of the trunk and test the continuity of the wires to the radar; 4. Open the fuse box and use a multimeter to check the continuity of the fuses related to the reversing radar; 5. The reversing radar module or buzzer is damaged and needs to be replaced. The reversing radar mainly consists of ultrasonic sensors, a controller, and a display.
17
0
Share

What is the minimum ground clearance of the Corolla?

The minimum ground clearance of the Corolla when fully loaded is 105mm, and it is 145mm when unloaded. The minimum ground clearance of a vehicle refers to the distance between the lowest point of the car (excluding the wheels) and the road surface when the car is fully loaded, indicating the car's ability to overcome obstacles. The Corolla is a compact car under FAW Toyota, with a length, width, and height of 4545mm, 1760mm, and 1490mm respectively, and a wheelbase of 2600mm. The Corolla has a top speed of 206km/h and is equipped with 1.6L and 1.8L naturally aspirated engines, paired with 5MT, 6MT, and CVT automatic transmissions.
14
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.