What's the difference between SN and SL engine oil?

How to reset the maintenance reminder for the 2019 CR-V?

First, ensure the CR-V's power mode is in the ON position, with the vehicle completely stopped and the gear in P (Park). Press the information display button on the left side of the steering wheel, then select the clock vehicle settings display. At this point, you will see the 'Vehicle' option. Subsequently, press the vehicle maintenance information reset to complete the process. Below is more information about car maintenance: 1. Car maintenance refers to the preventive work of regularly inspecting, cleaning, supplying, lubricating, adjusting, or replacing certain parts of the car, also known as car servicing. 2. Modern car maintenance mainly includes the maintenance scope of the engine system (engine), transmission system, air conditioning system, cooling system, fuel system, power steering system, etc. 3. The purpose of car maintenance is to keep the car clean and tidy, maintain normal technical conditions, eliminate hidden dangers, prevent faults, slow down the deterioration process, and extend the service life.

18

0

Share

How to Use the Three Driving Modes in the 2019 Kia Sportage?

This vehicle features a drive-mode button located to the left of the gear shift lever, which serves as the driving mode selector. The available modes are Eco (Economy), Comfort, and Sport. Pressing this button allows you to switch between modes. Below is an introduction to the three driving modes in the Sportage: Eco Mode: The throttle response becomes notably sluggish, and the transmission shifts up more aggressively. Comfort Mode: The throttle response is more sensitive compared to Eco Mode. Sport Mode: The throttle response is extremely sensitive, and the engine maintains higher RPMs. The transmission only upshifts once the engine reaches the redline zone.

13

2

Share

How to Turn Off the Daytime Running Lights on the Boyue

Method to turn off the Boyue's daytime running lights: Insert the ignition key with the ignition switch in the off position, move the turn signal switch to the left turn position, pull up the high beam and hold it, then turn on the ignition switch. Hold for about 5 seconds until you hear a prompt sound, then release the ignition switch and return it to the original position. The daytime running lights will turn off. Here is more information about daytime running lights: 1. The operation method of the Boyue's daytime running lights differs from other models. When the speed is below 10km/h, you can manually turn off the daytime running lights by operating the switch. When the speed exceeds 10km/h or the driving distance exceeds 100m, the daytime running lights will automatically turn on again. 2. Daytime running lights, also known as DRLs, are installed on both sides of the front end to signal the presence of the vehicle during the day. Their purpose is to make the vehicle more noticeable to others during daytime driving. The function of daytime running lights is not to help the driver see the road but to alert others that a vehicle is approaching.

15

5

Share

Common Issues with Corolla Steering Gear?

The common issue with the Corolla is abnormal noise from the steering wheel. The main reasons are as follows: 1. The steering column lacks lubrication, resulting in high friction, insufficient lubrication at the universal joint, or rust on the steering shaft. 2. Check if the power steering fluid is low or if there is abnormal noise from the steering gear's rack and pinion. 3. Inspect the steering knuckle for any issues and check if soundproofing cotton or debris is entangled under the steering gear. 4. The rubber bushings of the suspension stabilizer bar links may have aged and hardened. 5. The steering wheel's fixing screws may not be tightened properly, causing noise; if the steering wheel has been replaced, friction between plastic parts may produce noise.

19

2

Share

Where is the thermostat located on the Mondeo 2.5?

It is located near the engine, close to the water pump. The thermostat, also known as the temperature regulator, functions by automatically adjusting the amount of coolant entering the radiator based on the coolant temperature, thereby altering the coolant circulation range to regulate the cooling system's heat dissipation capacity and ensure the engine operates within the appropriate temperature range. Below is additional information about the thermostat: 1. The car thermostat must maintain good technical condition; otherwise, it will severely affect the engine's normal operation. For example, if the thermostat's main valve opens too late, it can cause engine overheating; if it opens too early, it prolongs the engine warm-up time, resulting in the engine running too cold. 2. Methods to determine whether the thermostat is functioning properly: If coolant continues to flow from the upper water chamber inlet pipe of the radiator when the engine starts cold, it indicates that the thermostat's main valve cannot close. If no coolant flows from the upper water chamber inlet pipe when the engine coolant temperature exceeds 70 degrees Celsius, it means the thermostat's main valve cannot open properly, and repairs are needed at this point.

16

1

Share

Why is there a buzzing sound when accelerating the Audi Q7?

The buzzing sound when accelerating the Audi Q7 is caused by friction and vibrations in the vehicle. This primarily occurs due to vibrations or resonance from various components as they move over uneven road surfaces, as well as friction generated by the relative motion of contacting parts, all of which can produce a buzzing noise. Below is more information about the Audi Q7: 1. The Audi Q7 adopts the SUV family's new design language, featuring a bold octagonal single-frame grille with six vertical slats, echoing the classic Roman column design seen in Audi's flagship SUVs. The front bumper, paired with a matte silver trim, enhances the robust and imposing front fascia. The two-part side air intake lines are highly expressive, while the welcome sill area emphasizes the Q7's ground clearance, showcasing its off-road prowess. 2. The lighting design of the Audi Q7 is one of its most anticipated features. Equipped with high-definition matrix LED headlights and laser headlights, their contours and lighting characteristics visually widen the vehicle's stance. The overall lighting layout is more refined, with a more intricate internal structure, delivering exceptional illumination range and a nod to racing technology. 3. The center console area exudes a high-tech feel, featuring a 10.1-inch multimedia entertainment screen at the top and an 8.6-inch climate control touchscreen below.

5

3

Share

What's the difference between SN and SL engine oil?

How to reset the maintenance reminder for the 2019 CR-V?

How to Use the Three Driving Modes in the 2019 Kia Sportage?

How to Turn Off the Daytime Running Lights on the Boyue

Common Issues with Corolla Steering Gear?

Where is the thermostat located on the Mondeo 2.5?

Why is there a buzzing sound when accelerating the Audi Q7?

What are the main uses of Turbine Oil No. 46?

How to Turn on the Ambient Lighting in the Tiguan L?

What to do if the Crown valve oil seals are installed incorrectly due to different colors?

Where to Set the Ambient Lighting in BMW 5 Series?