What's the difference between modifying ambient lights at a 4S store and a modification shop?

What are the disadvantages of stock cars?

The hazards of stock cars are as follows: 1. Oil oxidation corrodes mechanical parts. When a vehicle is parked for a long time, oil oxidation becomes very severe. After oil oxidation, firstly, the lubrication effect deteriorates significantly, and secondly, some acidic substances can corrode mechanical parts. The longer the vehicle remains idle, the more severe the deterioration. When the engine is started again, dry or semi-dry friction occurs between the cylinder and piston, accelerating part wear and significantly increasing starting resistance. 2. Tire deformation. After a car is parked, the vehicle's weight is borne by the four tire contact points with the ground, causing localized compression and deformation. The longer the car remains stationary, the harder it is for the deformed areas to recover, altering the weight distribution around the tires and resulting in uneven rolling radii and tire imbalance. Once the car enters high-speed driving, it can cause body shaking, posing a safety hazard.

9

4

Share

How to Lift the Wiper Blades on the Geely Boyue?

Method to lift the wiper blades on the Geely Boyue: 1. Operate the wiper switch on the center console, first move the wiper switch to the lower right position; 2. After moving it to the lower right, the wipers will automatically stop in this position, allowing them to be lifted. The Boyue is a compact SUV under Geely Auto, with dimensions of 4519mm in length, 1831mm in width, and 1694mm in height, and a wheelbase of 2670mm. In terms of power, the Geely Boyue is equipped with a 1.8TL4 engine, delivering a maximum power of 184 horsepower and a peak torque of 300 Nm, paired with a 7-speed dual-clutch transmission. The vehicle's suspension system combines a front MacPherson strut independent suspension with a rear multi-link independent suspension.

8

4

Share

Where is the rearview mirror heating switch for the ix35?

The rearview mirror heating switch for the Hyundai ix35 is located on the air conditioning control panel. There is a square-shaped switch with an upward arrow on it. Pressing this switch will activate the rearview mirror heating function. The rearview mirror heating feature is particularly useful during rainy or snowy weather. When activated, the heater behind the mirror quickly warms the surface, gradually removing rainwater or fog, eliminating the need for the driver to manually wipe the mirror frequently and reducing driving hazards. How to use the rearview mirror heating function: There are generally two ways to activate the rearview mirror heating function. One is combined with the electric rearview mirror adjustment button—simply rotate the knob to turn it on. The other is located on the air conditioning control panel—press the heating button to activate it. No manual angle adjustment is required, as there is an adjustment button on the driver's side. Principle of the rearview mirror heating function: After pressing the button, the electric heater behind the rearview mirror glass rapidly heats up to a fixed temperature within a few minutes, typically between 35-60 degrees Celsius. The heat is then distributed across the left and right rearview mirrors. As the temperature rises and evaporation occurs, water droplets on the mirror surface gradually shrink, and fog slowly dissipates, effectively clearing the mirror of frost and condensation. However, in heavy rain, its effectiveness may diminish and become less noticeable. Precautions when using the rearview mirror heating function: The principle of rearview mirror heating involves electric heating wires embedded in the mirror, which consume a significant amount of power. When using this function, ensure the vehicle is running. Avoid activating the rearview mirror heating while the car is stationary to prevent draining the battery and potentially leaving insufficient power to start the engine. Other methods for defogging rearview mirrors include: Opening windows slightly to allow air circulation between the inside and outside of the car, reducing the temperature difference and gradually eliminating fog. Adjusting the car's air conditioning to the appropriate setting to blow warm air for defogging.

4

3

Share

How Long After Passing Subject 2 Can You Take Subject 3?

Subject 3 can be scheduled online 10 days after passing Subject 2. In a few regions, Subjects 2 and 3 can be taken simultaneously. Subject 2: Also known as the small road test, it is part of the motor vehicle driver's license assessment and refers to the field driving skill test. For small vehicles (C1/C2), the test includes five mandatory items: reversing into a garage, parallel parking, stopping and starting on a slope, right-angle turns, and curve driving. Subject 3: Also known as the large road test, it is part of the motor vehicle driver's license assessment and refers to the road driving skill and safe civilized driving knowledge test. The content varies depending on the type of vehicle being tested for. It includes preparations before driving, starting, driving in a straight line, shifting gears, changing lanes, pulling over, passing through intersections, left and right turns at intersections, crossing pedestrian crossings, passing school zones, passing bus stops, meeting other vehicles, overtaking, making U-turns, and nighttime driving. Online Scheduling Notes: Be aware of your driving school's group scheduling time and on-site payment requirements. Additionally, after scheduling the test online, you can take the test within the designated time frame. Passing the test allows you to drive. Each subject test requires advance scheduling, and candidates should be familiar with the scheduling window for each subject to avoid missing the deadline.

20

5

Share

How to reset the maintenance light on a Soueast DX3?

Soueast DX3 maintenance light manual reset method is as follows: 1. Turn on the ignition switch, and while the OIL symbol is displayed on the combination meter information display, press and hold the "MODE button" for more than 5 seconds. 2. After the OIL symbol starts flashing, quickly press the "MODE button" five or more times. 3. The OIL symbol will flash three times and then turn off, the maintenance reminder alarm light will turn off, and the reset operation is completed. Here is more information about the maintenance light: 1. The "SERVICE" sign on the instrument panel display is the maintenance cycle indicator. When the ignition switch is in the ON position, the "SERVICE" sign on the display flashes, and the sign disappears after starting the engine, indicating that the vehicle should be serviced. After maintenance, the maintenance light should be reset. 2. Modern vehicle computers have maintenance mileage reminders. If the mileage reaches the specified number without maintenance, the maintenance light will come on. After maintenance, the service station will help you reset the maintenance light to start recording the driving mileage, and it will remind you at the next maintenance mileage. If you do not go to the service station, you can also reset the maintenance light by yourself according to the instructions in the manual. If it is not reset, the maintenance mileage cannot be recorded.

3

1

Share

Where are the stamped VIN locations for various vehicles?

Automotive VINs are typically located at the lower left corner of the front windshield, or on the driver's side door hinge pillar, door lock pillar, or door edge, which are quite noticeable. Some may also be found in the engine compartment. The VIN consists of a total of 17 characters and serves as the vehicle's unique identification information, akin to a car's "ID card." It includes information such as the country, manufacturer, year, model, and engine type. The 17-digit VIN is composed as follows: World Manufacturer Identifier (WMI): Positions 1-3, representing the manufacturer, brand, and type. Vehicle Descriptor Section (VDS): There are two standards, European and American. For the American standard, it covers positions 4-8, while the European standard covers positions 4-9. Position 9: For the American standard, this is a check digit calculated through weighted computation. For the European standard, it is the final digit of the VDS. Position 10: Model year (generally indicating the vehicle's manufacturing year, an important identifier for the vehicle). Position 11: Vehicle assembly plant. Positions 12-17 (last six digits): Sequential production number. Functions of the VIN: Confirming vehicle identity, especially in special circumstances where accurate identification is required. Traffic violation queries, which require entering the VIN. Vehicle batch queries, such as determining if a vehicle falls within a recall range. Precise parts lookup. If you're unsure about part numbers, you can search by entering the VIN, a method commonly used by many after-sales personnel.

17

3

Share

What's the difference between modifying ambient lights at a 4S store and a modification shop?

What are the disadvantages of stock cars?

How to Lift the Wiper Blades on the Geely Boyue?

Where is the rearview mirror heating switch for the ix35?

How Long After Passing Subject 2 Can You Take Subject 3?

How to reset the maintenance light on a Soueast DX3?

Where are the stamped VIN locations for various vehicles?

What are the reasons for a concrete pump suddenly stopping pumping?

How to Use the Heater in an Older BMW 5 Series?

Which Volkswagen models have lettering on the rear?

Where is the trunk switch located on the Envision?