What's the Difference Between 16-inch and 18-inch Wheels?

1 Answers
StPeter
07/30/25 12:45am
The differences between 16-inch and 18-inch wheels are as follows: 1. Different sizes: 18-inch wheels are larger compared to 16-inch ones. 2. Different aspect ratios: The larger the car tire size, the lower its aspect ratio. Tires with lower aspect ratios perform better in providing feedback on road conditions and handling lateral support during driving, while tires with higher aspect ratios offer better comfort but are relatively weaker in road feedback and lateral support. 3. Visual differences: Larger tire sizes naturally provide a stronger visual impact, making the car appear more imposing, whereas smaller tire sizes may slightly diminish the overall presence of the vehicle. 4. Differences during driving: 16-inch wheels have thicker sidewalls, offering better cushioning on bumpy roads. On the other hand, 18-inch wheels provide more responsive handling, especially at high speeds, but transmit more road feedback on uneven surfaces with weaker cushioning. 5. Differences in tire blowouts: Due to their larger diameter, 18-inch wheels cause less body tilt during a blowout, reducing the likelihood of sudden directional changes.
Was this review help?
12
1
Share
More Forum Discussions

What does it mean when the car displays 'sport'?

When the car displays 'sport', it means the vehicle is in sport mode, which is designed to increase power output and deliver higher torque. Sport mode is particularly useful for climbing hills and overtaking, and it can also be used during high-speed driving. Additionally, the high engine RPM in sport mode can help clean carbon deposits from the engine. The car's gear positions include: 1. P (Park) - used when the vehicle is parked for an extended period; 2. R (Reverse) - used when reversing the vehicle; 3. N (Neutral) - used for temporary parking; 4. D (Drive) - used for forward movement or driving; 5. L (Low) - low-speed mode, used for going uphill or downhill.
11
3
Share

How often should the Lynk & Co 02 transmission fluid be changed?

Normally, the transmission fluid should be replaced after driving more than 60,000 kilometers. Please refer to the vehicle's maintenance manual for specific requirements. Below is some relevant information: 1. The drain plug and fill plug for this vehicle are both located on the transmission oil pan. First, drain all the transmission fluid, then use a specialized machine to add fluid through the drain plug on the oil pan. Start by adding 2 liters, then start the engine. Continue adding until fluid flows out from the transmission oil pan. 2. The Lynk & Co 02 Yao PRO is equipped with a 1.5TD turbocharged engine developed by Volvo, paired with a 7-speed dual-clutch transmission. It delivers a maximum power of 132kW and a maximum torque of 265N.m. The combined fuel consumption is 6.5L/100km, urban fuel consumption is 8.6L/100km, and suburban fuel consumption is only 5.5L/100km.
14
1
Share

What Causes Engine Shaking at Idle When Cold?

The reasons for engine shaking or vibration at idle when cold are as follows: 1. Excessive carbon deposits. Severe carbon buildup in the engine cylinders can lead to clogged spark plugs and valves, directly causing shaking during idle. The engine needs timely cleaning. 2. Fuel supply system malfunction causing unstable oil pressure, resulting in inconsistent air-fuel mixture concentration. First consider replacing the fuel filter, as prolonged use may clog the filter element. Then check the oil pressure bypassing the fuel filter; if abnormal, it may indicate a fuel pump issue. 3. Worn engine mounts. If engine shaking worsens but power output remains unchanged, suspect worn engine mounts which require replacement. 4. Misfiring cylinders. The problem lies with the engine ignition coils or spark plugs. If ignition coils malfunction or spark plugs fail to fire properly, the vehicle will shake, necessitating spark plug replacement.
17
2
Share

What are the reasons for a car pulling to one side?

Specific reasons for a car pulling to one side are as follows: 1. Uneven tire pressure on the left and right sides. This is the most common cause of steering pull. Normally, the front and rear tire pressure is around 2.0-2.5. During driving, uneven contact area and force distribution between the left and right tires can lead to inconsistent tire pressure, causing the car to pull towards the side with lower tire pressure. 2. Uneven tread wear on the left and right tires. Differences in steering and road contact can cause uneven tire wear. When one side's tread is excessively worn, its diameter becomes smaller, making the car pull towards that side. 3. Different degrees of metal fatigue in the shock absorber springs. Uneven spring travel on both sides, with one higher and the other lower, results in an unleveled car body, leading to vehicle pull.
6
2
Share

Why Do Turbocharged Cars Require 95 Octane Gasoline?

Turbocharged cars require 95 octane gasoline because higher-octane gasoline offers better combustion stability and knock resistance, preventing detonation due to increased cylinder pressure. A turbocharged engine is one equipped with a turbocharger, which is essentially an air compressor that increases air intake by compressing air. Characteristics of gasoline include: 1. Volatility: It rapidly vaporizes in the engine cylinder and mixes with air to form a uniform combustible mixture. 2. Stability: This refers to its ability to resist oxidation under normal temperature and liquid-phase conditions. 3. Knock Resistance: This is the gasoline's ability to resist knocking under various operating conditions. 4. Corrosiveness: Sulfur compounds in gasoline can cause corrosion to materials.
20
0
Share

What does the tire specification 18560R15 mean?

It indicates a tire with a cross-section width of 185mm, an aspect ratio of 60, a radial construction, and a rim diameter of 15 inches. Detailed information about the specifications is as follows: 1. 185mm represents the cross-section width of the tire; 60 stands for the aspect ratio, which is the percentage of the tire's cross-section height divided by its width. A higher value means a thicker tire, resulting in lower maneuverability but increased comfort; R denotes the tire type, which is radial, and 15 indicates a rim diameter of 15 inches. 2. H represents the tire's speed rating, which indicates the maximum speed the tire can sustain under specified conditions with a specified load. The maximum speed for H-rated tires under specified load is 210 km/h.
4
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.