What's the difference between 1.5t and 2.0t?

Is It Safe to Drive a 15-Year-Old Car on the Highway?

If the car can still pass the annual inspection, it is generally safe to continue driving on the highway. If the vehicle is in good condition, it is perfectly acceptable to drive on the highway. However, if the car's condition is poor, it is advisable to avoid highway driving for safety reasons. Here are some important considerations for highway driving: Control Your Speed: As is well known, highways have smooth road surfaces, which often tempt drivers to exceed speed limits, compromising driving safety. Higher speeds increase centrifugal braking distance and reduce vehicle stability. Additionally, excessive speed shortens the driver's visibility and increases the likelihood of misjudgment. Therefore, maintaining an appropriate speed is the primary condition for ensuring highway driving safety. Avoid Driving Too Slowly: In China, the minimum speed limit on highways is 60 km/h during normal driving. Driving too slowly can disrupt the flow of traffic in the same lane, undermining the highway's efficiency and speed advantages. It can also lead to traffic congestion or chaotic situations where following vehicles attempt continuous overtaking. Maintain a Safe Following Distance: A safe following distance should vary based on driving speed, weather, and road conditions. The faster the speed, the greater the following distance should be. This is especially important during rain, snow, fog, or icy road conditions, where the distance should be significantly increased.

16

5

Share

How many times does a 15-year-old car need to be inspected annually?

Vehicles that are 15 years or older require two inspections per year. Vehicle annual inspection refers to a mandatory test for all vehicles that have obtained official license plates and registration certificates. It is equivalent to an annual physical examination for the vehicle according to the "Technical Conditions for Motor Vehicle Operation Safety," aimed at promptly eliminating potential safety hazards, encouraging enhanced vehicle maintenance, and reducing the occurrence of traffic accidents—commonly referred to as vehicle inspection. Below is an introduction to the contents of vehicle annual inspections: Passenger vehicles for commercial use: Inspected once a year for the first 5 years; after 5 years, inspected every 6 months. Trucks and large or medium-sized non-commercial passenger vehicles: Inspected once a year for the first 10 years; after 10 years, inspected every 6 months. Small and micro non-commercial passenger vehicles: Inspected once every 2 years for the first 6 years; after 6 years, inspected once a year; after 15 years, inspected every 6 months. Motorcycles: Inspected once every 2 years for the first 4 years; after 4 years, inspected once a year. Tractors and other motor vehicles: Inspected once a year. Commercial motor vehicles that pass the safety technical inspection within the stipulated inspection period are exempt from repeated safety technical inspections. Vehicles exceeding the scrapping age: Cannot be transferred (sold or bought), but can continue to be used. For transactions, the vehicle owner can first apply for the vehicle's scrapping certificate (to deregister the vehicle's records) at the vehicle management office before proceeding with the sale or purchase.

8

0

Share

What is the difference between 97 and 98 gasoline?

98 gasoline mainly differs from 97 gasoline in terms of anti-knock performance. Its anti-knock performance (RON) is one octane unit higher than 97 gasoline. Increasing the octane value of 97 unleaded gasoline by one unit requires greater technical difficulty and higher processing costs. The higher the grade, the stronger the anti-knock performance. The following is a related introduction about engine oil: Function of engine oil: Engine oil can lubricate and reduce wear, assist in cooling, seal and prevent leakage, prevent rust and corrosion, and dampen vibration for the engine. It is known as the "blood" of the car. Choosing the right engine oil and changing it regularly can maintain the engine in good condition and extend its service life. Selection of engine oil: The choice of engine oil is not about choosing the most expensive one, but about selecting the right engine oil based on the characteristics of the car engine and usual driving habits. Engine oil can be classified according to winter use and summer use. Engine oil suitable for winter use should first consider the low-temperature viscosity grade. In summer, the temperature is high, so there is no need to choose engine oil with a better low-temperature viscosity grade.

4

2

Share

What are the brands of 9-seater yellow license plate vehicles?

Vehicles with more than 9 seats are usually yellow license plate vehicles. There are many 9-seater models, such as JAC Refine, Dongfeng Fengxing, Jiangling Transit, Wuling Journey, Volkswagen Caravelle, Iveco, Maxus, Jinbei Haise, Toyota Sienna, and other brands that offer 9-seater models. A C1 driver's license generally allows driving vehicles with fewer than 9 seats. Additional information: Content 1: Yellow license plate vehicles generally refer to large vehicles, such as trucks weighing more than 2 tons or buses (including vans with 10 or more seats). Most commercial vehicles and motorcycles also have yellow license plates. Content 2: Large civilian vehicles have license plates with a yellow background and black characters. Small civilian vehicles have license plates with a blue background and white characters.

19

3

Share

What does 9HAT transmission mean?

9HAT transmission is China's first P2 hybrid 9-speed hydraulic automatic transmission. Based on the 9AT, the 9HAT adds a high-power P2 hybrid motor and a C0 clutch structure for disconnecting or connecting the transmission and engine power, enabling pure electric or hybrid driving modes for the vehicle. The following are the three functions of the transmission: Changing the transmission ratio: To meet the traction needs under different driving conditions, allowing the engine to operate as much as possible under favorable conditions and meeting the possible driving speed requirements. It can significantly change the vehicle's driving speed and the torque on the driving wheels. Achieving reverse driving: To meet the need for the vehicle to drive in reverse. For reverse driving, the engine crankshaft generally can only rotate in one direction, but the vehicle sometimes needs to drive in reverse. Therefore, the reverse gear set in the transmission is often used to achieve reverse driving. Interrupting power transmission: When the engine starts, idles, the vehicle shifts gears, or needs to stop for power output, the power transmission to the driving wheels is interrupted.

8

0

Share

Is a 9-speed manual-automatic transmission an AT transmission?

A manual-automatic transmission is not an AT; an AT is an automatic transmission. A manual-automatic transmission, also known as a semi-automatic transmission, combines manual and automatic transmission functions. It is based on an automatic transmission but allows the driver to manually increase or decrease gears. Below is an introduction to manual-automatic transmissions. Overview: A manual-automatic transmission is a gear-shifting device that integrates both manual and automatic transmission functions. This technology aims to enhance the fuel efficiency and controllability of automatic transmissions by returning the shift timing, which is typically determined by the computer, to the driver's control. This improves driving operability and enriches the driving experience. Working Principle: Structurally, a manual-automatic transmission mainly consists of a conventional gearbox (similar to a manual transmission), an electronically controlled clutch, an automatic shift mechanism, and an electronic control unit. The electronically controlled clutch automatically engages, disengages, or partially engages the clutch as needed. During operation, the transmission ECU controls a stepper motor to move the clutch fork, thereby engaging or disengaging the clutch. The automatic shift mechanism automatically selects the appropriate gear as required, typically using two stepper motors, both controlled by the transmission ECU. The gear lever setup is similar to that of a conventional automatic transmission, with no clutch pedal.

11

1

Share

What's the difference between 1.5t and 2.0t?

Is It Safe to Drive a 15-Year-Old Car on the Highway?

How many times does a 15-year-old car need to be inspected annually?

What is the difference between 97 and 98 gasoline?

What are the brands of 9-seater yellow license plate vehicles?

What does 9HAT transmission mean?

Is a 9-speed manual-automatic transmission an AT transmission?

How many centimeters is a 16-inch wheel rim?

What Stage is a 150,000 km Engine In?

What is the principle of the Shidai Jingang air brake cut-off?

Until Which Year Does the 2016 Vehicle Exemption from Inspection Last?