What's the Difference Between 1.5T and 2.0T?

Why is there no sound when connecting Bluetooth in the 2021 CR-V?

2021 CR-V Bluetooth connection has no sound because the volume is not turned on. The following is an introduction to the related content of car Bluetooth: 1. Programming: Some mobile phone music playback programming does not match the docking code of some car models, so it can only answer calls but cannot play music. It is necessary to change the Bluetooth playback frequency band, etc. 2. Multimedia music: The multimedia music of the car Bluetooth is not turned on and needs to be set to open. 3. Media audio: The mobile phone media audio is not turned off, causing signal interference with the Bluetooth function. The following is extended information about the reasons why the car navigation Bluetooth cannot connect: 1. Car location: The location of the car is subject to signal shielding or interference. 2. Matching problem: The mobile phone Bluetooth and car Bluetooth cannot match each other. 3. Connection conflict: When connecting to the car Bluetooth, the mobile phone has already connected with other Bluetooth devices, causing a conflict. 4. Password: The password is incorrect.

9

5

Share

Is the Green Book mailed together with the license plate?

The vehicle's Green Book and license plate are not mailed together, nor are they obtained at the same time. The Green Book is issued to the owner after the vehicle registration is completed, while the license plate is applied for at the vehicle management office. Owners can also apply for the license plate through the Traffic Management 12123 platform. The Green Book records detailed information about the vehicle. If the owner purchases the vehicle through a loan, the Green Book will be mortgaged to the bank. Only after the loan is fully repaid will the Green Book be returned to the owner. The owner must then bring the Green Book to the local vehicle management office to remove the mortgage information and re-register the vehicle. The vehicle's license plate is issued after the owner purchases the vehicle. Once received, the owner must properly affix the license plate to the front and rear of the vehicle as required by regulations. Failure to do so may result in severe penalties from traffic police. Methods to check the progress of license plate delivery: 11183 phone inquiry; 11183 is the phone number for China Post EMS. After dialing, transfer to a customer service representative and provide the license plate number to inquire about the logistics status. Generally, it takes 3-4 days for the license plate to be delivered. The delivery service is provided by EMS, and the speed may be slightly slower, but it usually does not take more than a week from dispatch to receipt. Traffic Management 12123 app inquiry; Register and log in to the app (Apple iOS 15 or above, version V2.8.1B437). Under "Online Progress," you can check the status of the license plate. Once the license plate is made and dispatched, you can also track the logistics. If a mobile number is linked, you will receive an SMS notification when the license plate is dispatched. Postal APP inquiry; For Apple iOS 15 or above, download the Postal APP (version V3.5.5), the official app of China Post. Open the app and click on the "Mail Progress" search bar at the top to enter the inquiry page. Select "Vehicle License Plate" and enter the license plate number or application number to check the status.

9

2

Share

Does the 2020 BMW X3 come with a particulate filter?

The 2020 BMW X3 is equipped with a particulate filter. Models produced after May 2020 come with a particulate filter. A particulate filter is a ceramic filter installed in the diesel engine emission system, which captures particulate emissions before they enter the atmosphere. It can reduce soot produced by diesel engines by more than 90%, and the captured particulate emissions are subsequently burned off during vehicle operation. Working principle of the particulate filter: The diesel particulate filter is coated with metals such as platinum, rhodium, and palladium. The black smoke containing carbon particles emitted by the diesel engine enters the exhaust particulate filter through a dedicated pipeline. After passing through the densely arranged bag filters inside, the carbon smoke particles are adsorbed onto the filter made of metal fiber felt. When the adsorption of particles reaches a certain level, the burner at the end automatically ignites and burns, turning the adsorbed carbon smoke particles into harmless carbon dioxide that is then released. To check whether the BMW X3 has a particulate filter, you can use the following three methods: Check the and to see if there is a particulate filter function. Additionally, you can carefully check the fault codes in the manual to see if there is a "particulate filter" warning light indicator. Check the label above the oil filler cap. If the oil cap clearly indicates 0W-20 grade oil, it means the vehicle is equipped with a particulate filter. Check whether there is a cylindrical section on the exhaust pipe behind the three-way catalytic converter. If there is, that is the particulate filter.

18

5

Share

Which 2010 LaCrosse model uses an Aisin transmission?

Aisin transmission is the gearbox brand used in the 2.0T version of the 2010 LaCrosse. Established in 1969, Aisin is a world-renowned professional developer and manufacturer of automotive automatic transmissions, holding the highest market share in this field globally. The 2.0T version of the 2010 LaCrosse is equipped with either a 6-speed automatic manual transmission or a 6-speed manual transmission. The automatic manual transmission features eight forward gears. Essentially, an automatic manual transmission is a traditional AT or CVT gearbox with added manual shifting functionality, designed to enhance the driving pleasure of automatic vehicles. For the 2.0T version of the 2010 LaCrosse, the following points should be noted during daily use: Do not delay transmission oil changes for extended periods. While many modern vehicles claim maintenance-free transmission oil, this does not mean it never needs replacement. Prolonged use without changing the oil can damage internal components such as bearings and the transmission casing. Avoid prolonged coasting in neutral. Many experienced drivers of manual vehicles coast in neutral, but for automatic transmissions, this can cause overheating and create a jolt when shifting back to D. Never shift into D/R before the vehicle comes to a complete stop. Some drivers shift into reverse while still moving to demonstrate smooth operation, but this severely damages transmission gears and can lead to gear grinding over time. Avoid frequent steep hill climbs in D. When facing steep inclines, automatic vehicles may overheat due to high loads or shift prematurely, resulting in insufficient power. In such cases, use manual mode to lock in lower gears or switch to sport mode to protect the transmission. Do not tow over long distances. If the automatic vehicle breaks down, use a flatbed tow truck with the vehicle in N to move it onto the platform. Never use a tow rope or drag the vehicle directly.

8

2

Share

What brand of engine does Foton use?

Foton Tunland uses the engine model 4F20TC3, with a maximum horsepower of 150, a maximum power of 110KW, a maximum power speed of 3500rpm, and a peak torque of 330N.m. Foton GAT ix5 uses the engine model DAM15DL, with a maximum horsepower of 116, a maximum power of 85KW, a maximum power speed of 6000rpm, and a peak torque of 150N.m. The engine of Foton GAT ix5 is produced by Beijing Foton Engine Plant of Beiqi Foton Motor Co., Ltd. The 4JB1TDi power introduced by Foton Tunland is a high-pressure common rail diesel engine developed and manufactured by Beijing Foton Engine Plant using Isuzu's advanced technology. For the daily maintenance of Foton engines, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected according to the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected according to mechanical load, and the selection standard should not be lower than the requirements specified by the manufacturer. Regularly change the oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, the performance deteriorates, which will bring various problems to the engine. To avoid failures, the oil should be changed regularly according to usage conditions, and the oil level should be moderate. When the oil passes through the fine holes of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is blocked and the oil cannot pass through the filter element, the filter element may burst or the safety valve may open, allowing the oil to pass through the bypass valve and still bring dirt back to the lubrication area, accelerating engine wear and increasing internal pollution. Regularly clean the crankcase. During engine operation, high-pressure unburned gas, acid, moisture, sulfur, and nitrogen oxides in the combustion chamber enter the crankcase through the gap between the piston ring and the cylinder wall, mixing with metal powder generated by part wear to form sludge. A small amount of sludge remains suspended in the oil, while a large amount precipitates, blocking the filter and oil holes, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the normal operation of the engine but also extends the overall lifespan of the radiator and engine.

8

4

Share

What items are replaced during the first vehicle maintenance?

The first maintenance at a 4S dealership includes the following aspects: changing the engine oil and oil filter, cleaning the air filter; checking the levels of various fluids to ensure they are normal, inspecting the generator belt and wiper blades for any damage; verifying the tire pressure is correct and checking for uneven wear, bulges, or other damage to the tires; examining the chassis components, including the brake pads, brake discs, connecting rods, ball joints, and CV joints for any scratches or damage; testing all vehicle switches; and ensuring all lights are functioning properly. Estimated time required: approximately 2 hours to complete all tasks. Items to bring for the first maintenance include: driver's license; maintenance manual; warranty manual; owner's ID card; vehicle registration certificate; and the vehicle purchase invoice. Take these to the designated first maintenance facility for the service. Important note: make an appointment with the 4S shop in advance. The first maintenance refers to the initial service after a new car has been driven. The specific timing varies by vehicle, typically after driving 1,000 to 3,000 kilometers. It is crucial to attend the first maintenance on time—neither early nor delayed. Completing the first maintenance signifies the end of the vehicle's break-in period, allowing it to be driven at standard loads and normal speeds as required by the manufacturer. The first maintenance period is calculated from the date of vehicle pickup and is determined by two indicators: mileage and time, whichever comes first. Here are the essential inspections and replacements that must be completed during the first maintenance of a new car: changing the engine oil and cleaning the three filters (oil filter, fuel filter, and air filter); checking the coolant level to ensure it is within the normal range; inspecting the brake and clutch fluid levels; verifying the power steering fluid level and checking for any leaks at the fluid line connections; examining the generator, air conditioning, water pump, and belts for aging and tension; and checking tire pressure and wear condition, adjusting air pressure or rotating tires if necessary. When changing the engine oil, the oil filter must also be replaced. The choice of engine oil must refer to the "Vehicle User and Maintenance Manual," as different vehicle models specify different oil grades. Maintenance precautions: Do not rinse the interior of the car with water: Many people clean their cars during holidays, using water to wash the body and wiping it with a cloth. It is important to note that the interior of the car should not be directly rinsed with water. If the floor mats are dirty, use a vacuum cleaner or remove them to scrub with a brush and detergent, then dry before replacing. The rubber floor mats in the driver's cabin have many drainage holes underneath. Water entering these areas will not dry naturally but may flow through the holes to components like the transmission, causing corrosion. The best practice is to use a vacuum cleaner followed by a damp cloth to prevent water accumulation. Do not mix different brands of antifreeze: If the antifreeze level is low, it is recommended to drain the existing antifreeze and refill with the same brand. Different brands of antifreeze have varying chemical properties, and their corrosion inhibitors may react negatively when mixed, leading to potential issues. Always use the same brand to avoid unnecessary complications. Do not lubricate wheel bolts and nuts: When bolts on a car become rusty, some may apply oil to restore functionality. However, lubricating wheel bolts and nuts can pose a safety risk. At high speeds, lubricated bolts and nuts may loosen or even fall off, leading to driving hazards. Do not press the accelerator when starting an EFI (Electronic Fuel Injection) vehicle: EFI vehicles differ from conventional cars in that their fuel injection control system automatically adjusts the fuel supply based on the engine's temperature and operating conditions, ensuring smooth startup without pressing the accelerator.

4

5

Share

What's the Difference Between 1.5T and 2.0T?

Why is there no sound when connecting Bluetooth in the 2021 CR-V?

Is the Green Book mailed together with the license plate?

Does the 2020 BMW X3 come with a particulate filter?

Which 2010 LaCrosse model uses an Aisin transmission?

What brand of engine does Foton use?

What items are replaced during the first vehicle maintenance?

What is the maximum wading depth of the Ford Edge?

Why is the air conditioning in the Baojun E200 not cooling?

What Causes the Central Control Screen to Not Light Up but the Reversing Camera to Work?

Where is the transmission cooling vent located on the 2020 New Sagitar?