What's New in the 2021 Toyota IZOA?

How to Open the Trunk of Dongfeng Honda Elysion?

Honda Elysion does not have a trunk switch inside the car; you need to manually lift it from the rear. Additionally, the trunk volume of the Elysion varies depending on the rear seat arrangement, offering a very spacious area. Steps to open the Honda Elysion trunk: 1. Ensure the car doors are unlocked. 2. Go to the rear of the vehicle, locate the trunk switch (usually above the license plate frame), and pull it to automatically open the trunk. 3. To close, simply pull the handle to shut it. Below is some relevant information about the Elysion: 1. The Honda Elysion is a mid-to-high-end MPV launched by Dongfeng Honda, featuring a stylish exterior, smooth lines, a well-designed interior, an elegant dashboard, a stable and graceful overall shape, spacious and ample room, comfortable handling, and economical fuel consumption. 2. The Dongfeng Honda Elysion is positioned above the Odyssey, with its main competitors being the Nissan Quest and Toyota Alphard. The new car has a strong business-oriented appearance and features dual electric sliding doors. It is equipped with three rows of seats, and the second-row seats can easily form a small meeting space with the third row via a lever, offering great convenience.

1

Share

What is the recommended speed control for a new car?

New cars mainly go through three stages: The first stage: The initial 100 kilometers require gentle driving. The second stage: Between 100 to 1,000 kilometers, the maximum speed should not exceed 80 km/h. The third stage: From 1,000 to 3,000 kilometers, the speed should not exceed 80% of the car's top speed, roughly around 3,000 RPM. After 3,000-5,000 kilometers and the first maintenance, you can drive at higher speeds to help clear carbon deposits from the engine. For multi-mode vehicles with both two-wheel drive and four-wheel drive, it's advisable to alternate between these modes during the break-in period. Gradually increase the speed rather than avoiding high speeds initially and then pushing the car hard towards the end of the break-in period. As is well known, four-wheel drive vehicles have an additional differential with gears, which requires break-in similar to the transmission. Additionally, since four-wheel drive and two-wheel drive modes place different loads on the engine and transmission, it's recommended to use lower speeds in four-wheel drive mode during the break-in period for overall vehicle protection.

11

4

Share

What is the maximum time limit for obtaining a driver's license?

The maximum time limit for obtaining a driver's license is three years. According to Article 38 of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses": The validity period of the driving skill examination permit is three years. This means that candidates must complete all subject examinations within three years. After passing Subject 1, a driving skill examination permit will be issued. The subsequent exams include Subject 2, Subject 3, and Subject 4, as detailed below: Subject 2, also known as the small road test, is the field driving skill examination. The test content includes reversing into a parking space, stopping and starting on a slope, turning at a right angle, driving along a curve, and parallel parking. The full score is 100, with a passing score of 80 or above. Subject 3, also known as the large road test, is the road driving skill examination. The test content includes: preparing to start, driving straight, changing lanes, passing intersections, pulling over, crossing pedestrian crossings, passing school zones, passing bus stops, meeting oncoming vehicles, overtaking, making U-turns, and driving at night. The full score is 100, with a passing score of 90 or above. Subject 4 covers safe and civilized driving requirements, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods such as tire blowouts, and post-accident handling knowledge. If 12 points (6 questions) are answered incorrectly during the test, the exam will be terminated. If a candidate fails to pass all exams within three years, their results will be invalidated, and they will need to start over. Previously passed subjects will also be invalidated. If the time limit is not met, an extension cannot be applied for. The public security department will cancel the candidate's relevant student status, and they will only be able to restart the training process. Regarding driver's license exam regulations: Each subject can be taken once, with one retake allowed if failed. If the retake is not taken or is also failed, the exam will be terminated, and the applicant must reschedule the exam. Exam scheduling: Subject 2 and Subject 3 exams can be rescheduled after ten days. Within the validity period of the learning driving permit, the number of rescheduling attempts for Subject 2 and Subject 3 road driving skill exams must not exceed five.

15

5

Share

Where is the rearview mirror heating switch for the BMW 525?

The BMW 525 comes standard with automatic rearview mirror heating, and there is no separate switch. The rearview mirror heating in the BMW 5 Series only activates when the automatic wiper sensor is turned on. After starting the car, the rearview mirror heating function senses the temperature and automatically activates when the temperature is below 15 degrees Celsius. This function is computer-controlled and can determine whether to heat the rearview mirror and to what extent based on the current outdoor temperature and whether the wipers are activated. Rearview mirror heating is particularly useful during rainy or snowy weather. When activated, the heater behind the mirror quickly warms the surface, gradually removing rainwater or fog, eliminating the need for the driver to manually wipe the mirror frequently, thereby reducing driving hazards. How to use the rearview mirror heating function: There are generally two ways to activate the rearview mirror heating function. One is combined with the electric rearview mirror adjustment button—simply rotate the knob to activate it. The other is located on the air conditioning control panel—press the heating button to activate it. There is no need to manually adjust the angle, as the driver's side has an adjustment button. Principle of the rearview mirror heating function: After pressing the button, the electric heater behind the rearview mirror glass rapidly heats up to a fixed temperature within a few minutes, typically between 35-60 degrees Celsius. The heat is then distributed across the left and right rearview mirrors. Simultaneously, as the temperature rises and evaporates, water droplets on the mirror surface become smaller, and fog gradually disappears, effectively defrosting and dehumidifying the mirror. If the rain is particularly heavy, the effect may diminish and become less noticeable. Precautions for using the rearview mirror heating function: The principle of rearview mirror heating involves adding electric heating wires to the mirror, which consume a significant amount of power. When using this function, ensure the car is running. Avoid activating the rearview mirror heating function when the car is stationary to prevent draining the battery and making it unable to start the car. Other methods for defogging rearview mirrors include: Opening windows for airflow: Crack open the side windows slightly to allow air convection between the inside and outside of the car, reducing the temperature difference and gradually eliminating fog. Adjusting the car's air conditioning to the appropriate setting can also use warm air from the AC to defog the mirrors.

4

0

Share

What Are the Causes of Noise in Universal Transmission Devices?

There are three main causes of noise in universal transmission devices: 1. Loose universal joint bearings due to wear or impact. 2. Loose splines in the driveshaft slip joint due to wear or impact. 3. Loose bolts in the universal joint flange connection. Below is an introduction to the application of universal transmission devices in automobiles: 1. Between the transmission (or transfer case) and the drive axle: Generally, the transmission, clutch, and engine of a car are integrated and mounted on the frame, while the drive axle is connected to the frame via suspension. Changes in load and road unevenness during driving can cause variations in the angle and distance between the drive axle input shaft and the transmission output shaft. 2. Between the transmission and transfer case in off-road vehicles: To eliminate the impact of coaxiality errors caused by frame deformation, manufacturing, and assembly on power transmission, a universal transmission device must be installed. 3. The half-shafts of the steering drive axle are segmented; during steering, the axes of the two half-shafts intersect, and the angle changes, necessitating the use of a universal joint. 4. For a disconnected drive axle, the differential housing is fixed to the frame, the axle housing swings up and down, and the half-shafts are segmented, requiring the use of a universal joint. 5. The steering shaft of some vehicles is equipped with a universal transmission device, which facilitates the overall layout of the steering mechanism.

5

2

Share

What is the normal tire pressure for the Lynk & Co 03?

The normal tire pressure range for the Lynk & Co 03 is 2.4-2.5bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2bar in winter and reduced by 0.1bar in summer. This data complies with the international GBT2978-2008 standard requirements. The Lynk & Co 03's tire pressure monitoring is displayed on the central dashboard screen. When the tire pressure monitoring system detects low tire pressure, the display will show a warning icon and message, allowing you to check which tire is underinflated via the tire pressure warning view. The Lynk & Co 03 uses an indirect tire pressure monitoring system, which relies on the car's ABS anti-lock braking system's wheel speed sensors to compare the rotational speed differences between tires to monitor tire pressure. Generally, a tire pressure exceeding 2.8bar is considered too high, while a tire pressure below 2.0bar is considered too low. Hazards of overinflated tires: Reduced tire friction and adhesion, affecting braking performance; causes steering wheel vibration and deviation, reducing driving comfort; accelerates wear on the central tread pattern, shortening tire lifespan; increases vehicle vibration, indirectly affecting the lifespan of other components; overstretches tire cords, reducing elasticity and increasing the load on the car during driving. Hazards of underinflated tires: Increases friction with the road surface, leading to higher fuel consumption; makes the steering wheel heavy and prone to deviation, compromising driving safety; increases movement in various parts of the tire, causing abnormal heat due to excessive rolling; reduces the functionality of cords and rubber, leading to delamination or cord breakage and excessive friction with the rim, damaging the bead area and causing abnormal wear; multiplies friction between the tire and ground, sharply raising tire temperature, softening the tire, and drastically reducing strength. High-speed driving may lead to tire blowouts. If the tire pressure monitoring indicator lights up (a yellow symbol with an irregular circle, no seal on top, four small spikes below, and an exclamation mark inside), there are generally three possible causes: Abnormal tire pressure: Typically, it will alert if the pressure is below 1.8bar or above 3.0bar. In this case, a tire check and pressure adjustment are needed. Tire pressure monitoring not reset: After inflating the tires, failing to reset the tire pressure monitoring system in time means the system still records the previous data, causing the indicator to light up. Simply reset the tire pressure. Damaged tire pressure sensor: The tire pressure sensor, installed inside the tire and connected to the inflation valve, monitors tire pressure. If the sensor is damaged during driving, the tire pressure warning light will turn on. For sensor damage, only a complete replacement will suffice.

3

Share

What's New in the 2021 Toyota IZOA?

How to Open the Trunk of Dongfeng Honda Elysion?

What is the recommended speed control for a new car?

What is the maximum time limit for obtaining a driver's license?

Where is the rearview mirror heating switch for the BMW 525?

What Are the Causes of Noise in Universal Transmission Devices?

What is the normal tire pressure for the Lynk & Co 03?

What Type of Engine Oil Does Toyota Camry Use?

What brand of car has a logo resembling a ram's head?

How often should the transmission fluid be changed in a CR-V?

How many cylinders does the Polo have?