···
Log in / Register

What reference points should be observed for parallel parking in Subject 2?

4 Answers
DelGianna
07/29/25 8:43am

Subject 2 driving test consists of five items: reverse parking, parallel parking, hill start, right-angle turn, and curve driving. For parallel parking, there are three key reference points that require special attention. First reference point: Steer fully right: It's relatively easier to locate the parking spot through the rearview mirror. When the front horizontal yellow line of the right parking space disappears from the right rearview mirror, gradually turn the steering wheel fully to the right. Second reference point: Straighten the wheels: When observing from the driver's seat, straighten the steering wheel immediately upon seeing the rear right corner of the parking space appear in the left rearview mirror. Third reference point: Steer fully left: While turning left, observe the left rearview mirror. When the left rear wheel just touches the white dashed line, quickly turn the steering wheel fully to the left. Parallel parking test criteria: 100 points deduction if the vehicle body crosses the line after parking. 10 points deduction if wheels touch the lane boundary during movement. 100 points deduction for failing to park completely within the space. 10 points deduction for not activating the left turn signal before starting. 100 points deduction for stopping during the maneuver.

Was this review help?
9
1
Share
StGabriella
08/12/25 6:34am

When I first started learning to drive, I was especially nervous practicing parallel parking. The key points to master are: when starting, the car body must be parallel to the parking space with a distance of about 30 cm; during reversing, keep a close eye on the right rearview mirror, and when the car body covers the corner of the parking space, quickly turn the steering wheel fully to the right; then look at the left rearview mirror, and the moment the rear of the car reveals the back corner of the parking space, immediately straighten the wheel; finally, check if the front of the car is parallel to the parking line. Don’t forget to use stickers to mark points during practice—it makes it easier to get the hang of it, and during the test, stay calm and check the mirrors frequently.

Was this review help?
6
0
Share
Expand All
RyderDella
10/05/25 8:01am

I've been driving for over a decade, and parallel parking comes as naturally as breathing. The key lies in the initial positioning: straighten your car to align perfectly with the adjacent vehicle. When reversing, focus on the rear wheel's position in the right mirror—start turning when it nears the front corner of the parking space. Then, watch for the shoulder reference line—stop and adjust when your shoulder aligns with the rear pillar of the parking spot. Remember to reverse slowly, frequently checking the rear wheels and parking space edges to avoid scraping walls. In real-world scenarios, stay flexible as conditions vary greatly.

Was this review help?
10
2
Share
Expand All
Marvin
11/19/25 2:44am

In the parallel parking test of Subject 2, you must focus on several official reference points: After initially stopping the car, align the rear wheel with the corner of the parking space; when reversing, observe from the right rearview mirror and turn the steering wheel fully to the right as soon as the car body covers the corner of the parking space; then, stop and adjust when the front corner of the parking space becomes visible in the left mirror. These points are fixed standards, and missing any one can result in severe point deductions. It is recommended to practice more with simulated parking spaces to familiarize yourself with the steps and avoid mistakes during the test.

Was this review help?
10
0
Share
Expand All
More Forum Discussions

How to Check the National Emission Standard of a Motor Vehicle?

Here are the methods to check which national emission standard a motor vehicle belongs to: 1. Check the vehicle's environmental protection label, which usually has a clear mark on the back. 2. Log in to the website of the Motor Vehicle Exhaust Pollution Supervision and Management Center to inquire. 3. Take the motor vehicle registration certificate (original or copy is acceptable) to the vehicle management office for inquiry. 4. For new vehicles, check the vehicle's factory certificate of conformity. However, generally, the certificate is kept at the vehicle management office, so it is recommended to make a copy for future use when purchasing a new car. 5. Make a rough distinction based on the year the vehicle was registered. Most vehicles registered after 2008 are National IV; vehicles registered in 2007 could be National III or National IV; vehicles registered before 2007 are mostly below National IV, i.e., National III or National II; vehicles registered before 2005 are mostly National II.
4
4
Share

Which car brand has a logo similar to the letter T?

The car brand with a logo similar to the letter T is Tesla. Here is some relevant information about Tesla: 1. Tesla is an American electric vehicle and clean energy company that manufactures and sells electric cars, solar panels, and energy storage products. It is a renowned U.S. new energy vehicle brand, founded by the famous physics genius Elon Musk, with its headquarters located in Palo Alto, Silicon Valley, California. 2. The Tesla logo not only represents the abbreviation of its English name 'Tesla' but also depicts a cross-section of an electric motor. The main part of the letter T symbolizes a section of the motor's rotor, while the second line at the top represents part of the outer stator. 3. The major vehicle models produced by Tesla include the Tesla Roadster, Tesla Model S, Dual Motor All-Wheel Drive Model S, and Tesla Model X. 4. Tesla electric vehicles meet the highest standards in the automotive industry in terms of quality, safety, and performance. They also offer cutting-edge services like over-the-air software updates and comprehensive charging solutions, delivering the ultimate driving experience and consumer satisfaction.
17
2
Share

How to Bleed the Coolant in a BMW?

BMW coolant bleeding method is as follows: 1. Loosen the auxiliary tank cap but do not remove it (to prevent excessive coolant overflow). Turn on the ignition switch, set the air conditioning heating regulator to the highest temperature, and adjust the air conditioning fan to low speed (to open the heating valve and operate the auxiliary water pump). 2. Start the engine and press the accelerator pedal sharply 3-4 times. 3. If the coolant level in the auxiliary tank drops at this time, add coolant to the auxiliary tank up to the maximum specified mark. 4. Tighten the auxiliary tank cap and let the engine warm up until the thermostat opens. 5. Finally, wait for the engine to cool down to room temperature (20-30°C) and check whether the coolant level is within the standard. The top of the float in the black auxiliary tank should be level with the top surface of the auxiliary tank cap. For the white transparent auxiliary tank, observe whether the liquid level reaches the highest mark.
11
2
Share

What is the top speed of the Jetta VS5?

The top speed of the Jetta VS5 is 175 kilometers per hour. Here are some details about this vehicle: 1. Exterior design. The front face adopts Volkswagen's X design elements, extending bidirectionally towards the hood and lower grille. The side body lines continue Volkswagen's brand design, running through the entire vehicle. 2. Powertrain. The car is equipped with an EA211 1.4T-110KW engine, paired with an MQ250 manual transmission and an Aisin AQ250 six-speed automatic transmission. 3. Features. The new vehicle comes with core equipment such as front MacPherson independent suspension, rear multi-link independent suspension, ESP electronic stability system, and ACC adaptive cruise control. It also includes the KESSY smart keyless entry system + 5th generation intelligent online anti-theft system, a smart multifunctional trip computer, and telematics functions.
5
5
Share

Is the Macan's Transmission a PDK?

Macan's transmission can be referred to as a PDK transmission, having undergone special tuning and calibration by Porsche. The full name of the PDK transmission is Porsche-Doppelkupplung, or Porsche Double-Clutch Transmission, which is essentially a brand name. All dual-clutch transmissions produced by Porsche can be called PDK transmissions. More details are as follows: 1. In fact, the dual-clutch transmission in the Porsche Macan is not a true PDK transmission; this vehicle uses Audi's dual-clutch transmission. The Porsche Macan shares the same platform as the Audi Q5, so it's quite normal for it to use Audi's dual-clutch transmission. 2. Porsche's PDK transmission is highly stable, with excellent reliability and durability. Tests have shown that even after 50 consecutive launch starts, the PDK transmission does not exhibit any overheating warnings or malfunctions.
5
0
Share

Is the turn signal down for left or right turn?

Turning the signal lever downward activates the left turn signal. Drivers can simply imagine the turn signal lever as a steering wheel—the direction you turn it corresponds to the intended turn direction. The standard configuration follows the "down-right, up-left" convention, where downward movement (counterclockwise) is generally interpreted as a left turn, while upward movement (clockwise) indicates a right turn. According to Articles 57.1 and 57.2 of the Implementation Regulations of the Road Traffic Safety Law of the People's Republic of China: • When making a left turn, changing lanes to the left, preparing to overtake, leaving a parking spot, or making a U-turn, the left turn signal must be activated in advance. • When making a right turn, changing lanes to the right, returning to the original lane after overtaking, or pulling over to the roadside, the right turn signal must be activated in advance. Turn signals are critical indicators that alert surrounding vehicles and pedestrians when a motor vehicle changes direction. These lights use xenon tubes and microcontroller-regulated circuits to produce alternating high-frequency flashes. A flasher relay controls the blinking operation. As signal lights, turn signals primarily serve to notify nearby vehicles of intended directional changes, prompting them to yield and avoid collisions. Activating turn signals in advance whenever leaving the current lane is a fundamental principle of safe driving.
5
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.