What procedures need to be completed after owning a new car for two years?

3 Answers
Petunia
07/29/25 8:12am
New cars require annual inspection after two years, but if a private car meets certain conditions, it is exempt from inspection for the first 6 years. This means that for the first 6 years of a new car, there is no need for on-site inspection, only applying for an inspection compliance sticker every two years. Vehicle annual inspection can be done at the vehicle management office or its inspection stations. Below are the required documents for vehicle annual inspection (individual): 1. Original vehicle license; 2. Original copy of compulsory traffic insurance; 3. Copy of ID card. Below are the required documents for vehicle annual inspection (organization): 1. Original vehicle license; 2. Copy of compulsory traffic insurance; 3. Organization code certificate of the People's Republic of China (with fresh seal); 4. Letter of authorization (with fresh seal); 5. Copy of agent's ID card.
Was this review help?
8
4
Share
LucyDella
08/13/25 4:15am
After two years with a new car, the procedures aren’t overly complicated but are crucial. First and foremost is maintenance: oil changes, filter replacements, etc. Manufacturers typically recommend every 5,000 to 10,000 kilometers—I always book appointments at the 4S店 for peace of mind. Second, insurance renewal: before expiration, I compare offers from multiple insurers to snag the best deal, saving a few hundred bucks. Third, annual inspections: new cars are exempt from on-site checks for the first two years, but from year three onward, it’s mandatory. I clear any traffic violations via the app in advance, bring my vehicle license to the inspection station, and wrap it up in half an hour. Fourth, vehicle condition checks: tire wear, brake pads, lighting—these small details prevent major accidents. Regular upkeep also extends the car’s lifespan, saving money and ensuring safety. Lastly, if the manufacturer offers extended warranty coverage, consider renewing to avoid costly major repairs later. Bottom line: don’t procrastinate. Make a checklist and act—your car will stay as durable as new!
Was this review help?
2
0
Share
Expand All
DeHarley
10/05/25 4:56am
As an experienced driver who has owned multiple cars, the key to maintaining a vehicle over two years lies in long-term care. First, regular maintenance is essential, especially checking the engine and cooling system to prevent overheating failures. Second, don’t wait until the last minute to renew your insurance—compare plans a week in advance to find cost-effective options and avoid unnecessary expenses. Third, stay updated on new annual inspection policies: after two years, an on-site test is required, so clean and organize your vehicle beforehand to ensure a smooth pass. Fourth, handle any traffic violations promptly—check the traffic management app or website to clear fines and avoid late fees. Fifth, conduct regular self-checks, such as monitoring tire pressure and brake responsiveness, as these small measures can prevent roadside breakdowns. Remember to keep detailed maintenance records, which will help with resale valuation. In short, diligent upkeep makes your car more reliable and ensures smoother daily driving.
Was this review help?
4
1
Share
Expand All
More Forum Discussions

How to Turn Off the Engine Auto Start-Stop?

Methods to turn off the auto start-stop are as follows: 1. Press the auto start-stop button directly (a circular arrow containing the letter A), and the dashboard will indicate that the system is turned off. 2. If you want to use this function again, press the button to turn it back on. 3. After turning on the auto start-stop, pressing the brake pedal slightly harder will turn off the engine, and pressing the brake again will start the engine, thereby saving fuel. The following are the disadvantages of auto start-stop: 1. Higher maintenance costs for the battery and starter: Frequent engine starts and stops can damage related components, such as the starter and battery. Although vehicles with auto start-stop systems use enhanced starters and batteries, in actual use, their failure rates are higher than those of ordinary vehicles without auto start-stop systems. 2. Poor user experience: Different models from various brands have different designs for the auto start-stop system. Some models have poor start-stop logic, with inaccurate intervention timing. Sometimes, the system does not activate even during prolonged stops. 3. More fuel consumption in traffic jams: In severe traffic jams, if the engine stops for a long time, the combustion chamber temperature drops, and unburned hydrocarbons and paraffin can form carbon deposits on the cylinder walls. If the fuel quality is poor, the situation can worsen. Carbon deposits increase fuel consumption and reduce power. The auto start-stop function, designed to reduce fuel consumption, may instead increase it.
7
5
Share

What is the appropriate slope height for car passage at the entrance?

Generally, it should not exceed 15%. The straight gentle slope within 3.6 meters at the entrance and exit should be 7.5%, and the curved gentle slope within 2.4 meters should also be 7.5%. This prevents the front and rear chassis of the vehicle from scraping. Relevant introduction to car ramp slopes: Straight ramp: The ramp width should not be less than 1200, and the slope should not exceed 1:12. Double-turn ramp: The ramp width is 1200, the slope is 1:12, and the depth of the ramp start, end, and rest platform is 1500. L-shaped ramp: The ramp width is 1200, the slope is less than 1:12, and the depth of the ramp start, end, and rest platform is 1500. Slopes greater than 10%: When the slope exceeds 10%, gentle slopes should be set at both the upper and lower ends. The horizontal length of the straight gentle slope section should not be less than 3.6m, and the gentle slope gradient should be half of the ramp slope. The horizontal length of the curved gentle slope section should not be less than 2.4m, the curve radius should not be less than 20m, and the midpoint of the gentle slope section should be the original start or end point of the ramp.
1
3
Share

What engine does the Chery Cowin C3 use?

The Cowin C3 shares the same engine as the Chery E3, which is a domestically produced engine from Chery and is one of China's top ten engines. Below is a detailed introduction to the Cowin C3: 1. In terms of exterior design, the Cowin C3 adopts a styling similar to the Chery E2 sedan version. The front face of the car is very rounded, featuring a three-bar horizontal grille design that connects with the headlight assembly. The front bumper has an inverted trapezoidal shape and is equipped with fog lights on both sides. The rear design of the car is very compact, positioning it as a small car. 2. For the interior, the Cowin C3 has a simple design, combining black and beige colors with chrome accents, giving the car a very stylish appearance. In terms of configuration, the Cowin C3 comes standard with features like one-key car search and USB ports. The 1.5L manual Yellow Diamond trim and above also include power-adjustable exterior rearview mirrors. The top-of-the-line 1.5L manual Gold Diamond trim additionally features cruise control, a multifunction steering wheel, a 7-inch touchscreen, and a navigation system. 3. Under the hood, the Cowin C3 is powered by a 1.5L naturally aspirated engine, delivering a maximum power of 109 horsepower and a peak torque of 140 Nm. 4. The transmission system is paired with a 5-speed manual gearbox.
15
3
Share

What size tires does the Wuling Rongguang use?

All models are equipped with 175/70R14 tires. Here are the detailed specifications of the Wuling Rongguang: 1. The Wuling Rongguang is powered by two engines: a 1.2L naturally aspirated engine and a 1.5L naturally aspirated engine. 2. The 1.2L naturally aspirated engine delivers 82 horsepower and a maximum torque of 115 Nm. This engine reaches its maximum power at 5600 rpm and its maximum torque between 3600 to 4000 rpm. It features multi-point fuel injection technology, an aluminum cylinder head, and a cast iron cylinder block, paired with a 5-speed manual transmission. 3. The 1.5L naturally aspirated engine produces 107 horsepower and a maximum torque of 145 Nm. This engine achieves its maximum power at 5400 rpm and its maximum torque between 3600 to 4000 rpm. It also utilizes multi-point fuel injection technology, an aluminum cylinder head, and a cast iron block, mated to a 5-speed manual transmission. 4. The Wuling Rongguang features a MacPherson independent front suspension and a leaf spring rear suspension. The basic model measures 4135 mm in length, 1660 mm in width, 1870 mm in height, with a wheelbase of 2700 mm.
14
2
Share

What is the collision coefficient of the new generation Smart Run?

The new generation Smart Run received a five-star rating in the C-NCAP crash test, and achieved an M-level comprehensive score for occupant safety in the CIASI crash test. Here is an introduction to the new generation Smart Run: 1. Exterior: The vehicle dimensions are 4460×1850×1670mm, with a wheelbase of 2640mm. 2. Features: It is equipped with an intelligent safety assistance system, tire pressure monitoring system, EPB electronic parking brake + auto hold. Additionally, it features a panoramic sunroof, 7-inch full-color instrument cluster, 8-way adjustable seats, automatic climate control, and an air purification system.
16
0
Share

How Many Class Hours for Subject 2?

Generally, the class hours for C1 Subject 2 are 16 hours, while for C2 Subject 2, it's 14 hours. However, the actual time required may vary depending on individual progress. Faster learners may need less time, while others may require more. Duration of Subject 2 Class Hours: Each class hour is 60 minutes, with effective teaching time not less than 45 minutes. Additionally, each student's daily classroom learning and practical operation time should not exceed 4 hours; that is, a maximum of 4 class hours can be logged per day, and any excess will not be recorded by the system. Notes for Subject 2 Exam: Drive the car to the stop line position for the right reverse parking, stop when your shoulder aligns with the stop line, and shift into reverse gear to start the parking. When entering the side parking test area, use the raised part of the wiper as a reference to follow the road edge line. Before entering the curve driving test area, position the vehicle slightly to the left to enter the curve. After driving into the curve, exit from the other end. Upon entering the right-angle turn area, determine whether it's a right or left turn. Before ascending the slope, maintain a 30 cm distance between the vehicle body and the road edge line, and drive straight.
8
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.