What procedures are required to use your own car for Didi?

Why is the BYD tire pressure warning light on?

There are generally three reasons why the BYD tire pressure warning light is on: Abnormal tire pressure: It usually triggers an alarm when the pressure is below 1.8 bar or above 3.0 bar. In this case, tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure monitoring system is not reset in time, it will continue to display the previous data, causing the tire pressure warning light to illuminate. Simply resetting the tire pressure monitoring system will resolve this issue. Damaged tire pressure sensor: The tire pressure sensor, which monitors tire pressure, is installed inside the tire and connected to the tire inflation valve. If the sensor is damaged due to impact while driving, the tire pressure warning light will also turn on. For sensor damage, the only solution is to replace it with a new one. There are three common types of tire pressure monitoring systems: Direct tire pressure monitoring: This system uses pressure sensors installed in each tire to directly measure tire pressure. The pressure data is transmitted wirelessly from inside the tire to a central receiver module, which then displays the pressure readings for each tire. Indirect tire pressure monitoring: When the pressure in a tire decreases, the vehicle's weight causes the rolling radius of that tire to reduce, making it rotate faster than the other wheels. By comparing the rotational speed differences between tires, this system monitors tire pressure. Introduction to the Tire Pressure Monitoring System (TPMS): This system combines the advantages of both direct and indirect systems. It equips direct sensors in two diagonally opposite tires and includes a four-wheel indirect system. Compared to a full direct system, this hybrid approach reduces costs and overcomes the limitation of indirect systems, which cannot detect simultaneous low pressure in multiple tires.

17

1

Share

What are the reasons for no air coming out of the Peugeot 408 vents?

The reasons for no air coming out of the Peugeot 408 vents may include abnormal connection of the vent switch, blown fuse of the air conditioning, blocked air vents, or malfunctioning of the air conditioning motor fan. Here are the detailed explanations: 1. Clogged air conditioning filter: The most common reason for no air coming out of the air conditioning is a clogged air conditioning filter. Since external air typically passes through the air conditioning filter before entering the car interior, the filter's main function is to isolate dust, particles, moisture, and other attachments in the air. It also provides strong sterilization and deodorization effects, ensuring that passengers do not inhale harmful gases, which could threaten health and driving safety. The air conditioning filter is usually installed above or below the blower. Therefore, air must pass through it to enter the car. If the filter is clogged, poor air circulation will naturally result in no air coming out. 2. Damaged blower: The blower is a crucial part of the air conditioning system, as the circulation of air inside the car relies on its operation. When using the air conditioning at high fan speeds, a buzzing sound can often be heard from under the passenger seat. This is the sound of the blower working—the higher the air demand, the faster the blower must draw in air. If the blower is damaged, it may not draw in enough air or stop drawing air altogether, preventing air from being blown out and causing the air conditioning to not function. 3. Faulty air door, computer, or switch: The air door is located inside the air duct and, being made of plastic, may get stuck or break. When the air door fails to open, the air drawn in by the blower cannot flow out through the vents, resulting in no air coming out of the air conditioning.

7

2

Share

What type of engine oil should be used for Peugeot 5008?

The original equipment manufacturer (OEM) oil is the recommended engine oil for Peugeot 5008, with a viscosity grade of 5W-40. In terms of compatibility, the OEM oil is well-suited for the engine. However, depending on specific requirements, other engine oils may offer additional benefits such as noise reduction, fuel efficiency, or enhanced performance. Therefore, alternative brands like Mobil, Shell, or Castrol can also be considered. The viscosity of engine oil changes with temperature variations, so special attention should be paid to its performance under both low and high temperatures. For example, in the case of 5W-30, the first number indicates low-temperature fluidity. 5W means it can withstand temperatures as low as -30°C, and a smaller number represents better low-temperature fluidity, ensuring smoother cold starts for the vehicle. The second number represents the kinematic viscosity of the oil at 100°C. A higher value indicates better viscosity retention at high temperatures, which can also be interpreted as superior lubrication performance under high-temperature conditions. The method for changing the engine oil in a Peugeot 5008 is as follows: Wait for the engine temperature to cool down, allowing the oil to flow back into the oil pan. Use a wrench to loosen the oil drain plug and place an oil pan underneath to catch the old oil until the flow stops completely. Start the engine and let it run for about 30 seconds to allow the oil in the main oil passages to drain out. Use a specialized wrench to remove the oil filter. Apply a small amount of new oil to the oil seal of the new oil filter and tighten it clockwise by hand. Add the new engine oil through the oil filler cap on the engine valve cover, typically filling up to three-quarters of the oil container. Start the engine and let it run for 5 minutes, checking for any leaks around the oil drain plug and oil filter. If leaks are found, perform necessary repairs. After stopping the engine, pull out the oil dipstick to ensure the oil level is within the standard range.

13

4

Share

Does changing the color of the roof exceed 30%?

Changing the color of the roof may or may not exceed 30% of the vehicle's body area. According to Article 6, Chapter 2 of the 'Road Traffic Safety Law,' if the color change area of a motor vehicle does not exceed 30%, there is no need to register the change. Conversely, if it exceeds 30%, it must be recorded, and the change must be registered within 10 days after the vehicle's color is altered. Precautions for vehicle color change: Before changing the color of a motor vehicle, it is necessary to consult the local vehicle management office where the vehicle is registered to determine whether the region permits color changes using wraps. If the region does not support this method, the wrap must be completely removed to restore the vehicle's original color, as no registration can be processed otherwise. Documents required for applying to change the body color of a motor vehicle: 'Motor Vehicle Modification Registration Application Form.' Proof of identity of the vehicle owner and agent. Motor vehicle registration certificate. Motor vehicle driving license. Additionally, according to the 'Motor Vehicle Registration Regulations,' owners are no longer required to apply to the vehicle management office in advance. They can first change the vehicle's color, install body kits, replace the engine, etc., and then apply for modification registration with the vehicle management office. According to Article 10, registered motor vehicles must apply for modification registration under the following circumstances: Change of body color. Replacement of the engine. Replacement of the body or frame. Replacement of the entire vehicle due to quality issues. Change of use, such as converting a commercial vehicle to a non-commercial vehicle or vice versa. Change of the vehicle owner's residence into or out of the jurisdiction of the vehicle management office. Furthermore, according to Article 15 of the 'Road Traffic Safety Law of the People's Republic of China,' police cars, fire trucks, ambulances, and engineering rescue vehicles must display designated patterns and install alarms and warning lights as required. Other motor vehicles are prohibited from using similar patterns, alarms, or warning lights. According to Article 56 of the 'Motor Vehicle Registration Regulations,' if the body color is changed without following the proper modification registration procedures, the traffic management department of the public security authority may issue a warning or impose a fine. The vehicle may also be impounded and required to revert to its original color. Important notes: Vehicle inspection can only be conducted three working days after the modification: Some people rush to apply for a color change before an inspection, hoping to complete the process quickly. However, the vehicle management office's system requires three working days to complete the data and information filing for the color change application. Therefore, the vehicle can only undergo a normal annual inspection at least three working days after the modification is recorded. If only a small part of the roof is repainted and the change does not exceed one-third of the vehicle's body area, there is no need to apply for a color change registration. If it exceeds one-third, the owner must apply for a color change registration at the vehicle management office; otherwise, the vehicle will not pass the inspection.

6

3

Share

Can I buy a car just after getting my driver's license?

Yes, here is more information about driver's license: 1. Overview: The full name of driver's license is motor vehicle driving license, also known as "driver's license". It is a certificate required by law for motor vehicle drivers. Driving a motor vehicle requires certain driving skills. People lacking such skills may cause traffic accidents if they drive randomly. Driving without a license is prohibited. 2. Notes: The permission to drive vehicles is granted through the issuance of a driver's license. This indicates that obtaining a driver's license is a formal procedure that must be issued by a specialized authority.

7

0

Share

How to Turn Off the Lights on the Tiguan?

There is a switch above the front row with several modes. You can directly turn off the lights by locating this switch. Here is some information about the Tiguan: 1. The Tiguan is Volkswagen's first domestically produced SUV. This compact SUV made its debut at the 2009 Guangzhou Auto Show and quickly gained widespread attention and popularity. 2. The Shanghai Volkswagen Tiguan offers four versions with a total of seven models: Urban, Trendline, Comfortline, and Highline. These models are equipped with Volkswagen's flagship 1.8TSI and 2.0TSI engines, delivering excellent performance in both power and fuel efficiency.

18

0

Share

What procedures are required to use your own car for Didi?

Why is the BYD tire pressure warning light on?

What are the reasons for no air coming out of the Peugeot 408 vents?

What type of engine oil should be used for Peugeot 5008?

Does changing the color of the roof exceed 30%?

Can I buy a car just after getting my driver's license?

How to Turn Off the Lights on the Tiguan?

What is the lever for shifting gears in a car called?

Can the Land Rover Evoque use 92-octane gasoline?

Where is the engine number located on a BMW X5?

Is it permissible to use the horn reasonably in non-horn-prohibited road sections?