What procedures are required to transfer the vehicle license back to the local area?

What to Do When the Fuel Float Gets Stuck?

The fuel float, also known as the fuel level sensor in the fuel tank, is typically integrated with the fuel pump. When the fuel float gets stuck, it is necessary to remove the fuel pump for handling. The relevant details are as follows: 1. Function of the fuel float: Many people mistakenly think the fuel float is damaged when it gets stuck, but in reality, it's just because the connecting rod between the fuel level sensor and the float is stuck, preventing the float from moving up and down normally. This situation can cause the fuel gauge needle to freeze at a certain position. The fuel float can float on the surface of the gasoline, with one end of the lever being the float and the other end being a potentiometer. When the liquid level drops, the potentiometer rotates through the lever principle, resulting in different potentials at different positions and varying resistance values. Consequently, the corresponding voltage also differs, which can be observed on the vehicle's instrument panel. 2. Impact of a stuck fuel float: If the fuel float is stuck or damaged, the movement of the fuel gauge needle cannot be seen on the vehicle's instrument panel. If the fuel float is broken or aged and allows fuel to enter, it will not float, causing the fuel gauge to respond slowly and affecting the driver's judgment.

14

0

Share

What does A/C mean in a car?

Automobile A/C refers to the air conditioning switch button in a car. The following is a related introduction to car air conditioning: 1. Introduction: The automobile air conditioning device (air-conditioning-device), referred to as car air conditioning, is used to adjust and control the temperature, humidity, air cleanliness, and air flow inside the car compartment to the optimal state. It provides a comfortable riding environment for passengers, reducing travel fatigue; it creates good working conditions for the driver and plays an important role in ensuring safe driving as a ventilation device. 2. Devices and components: It includes refrigeration devices, heating devices, and ventilation devices. Modern air conditioning systems consist of refrigeration systems, heating systems, ventilation and air purification devices, and control systems.

4

3

Share

What is the Difference Between Horsepower and Power?

The differences between horsepower and power mainly lie in their definitions, physical meanings, and usage habits. Here are the specifics: 1. Different definitions: Engine power refers to how fast an engine performs work. The work done by an engine per unit time is called the engine's power. Corresponding to indicated work and effective work, it is referred to as indicated power and effective power (output power), with the difference between the two called mechanical loss power. Horsepower, proposed by James Watt, is a commonly used unit for measuring power in engineering. It generally refers to metric horsepower rather than imperial horsepower. 2. Different physical meanings: Power is a physical quantity that indicates how fast an object performs work. Horsepower is defined as 1 metric horsepower being the work of 75 kilogram-force·meters completed in 1 second. 3. Different usage habits: Europe and America are accustomed to using horsepower as a unit, while China is accustomed to using metric units, i.e., kilowatts.

4

0

Share

Roewe 350 Tire Model

The tire model for the Roewe 350 is 205/55R16. The first number, 205, indicates the tire width is 205MM. The 55 represents the aspect ratio of the tire's cross-section at 55%, meaning the section height is 55% of the width. The letter R stands for radial tire, and 16 denotes the rim diameter is 16 inches. The Roewe 350 has a fuel consumption of 6.6L per 100 kilometers. In addition to the model, tires also display the following common data: Tire cord material: Indicated by Chinese pinyin, such as M for cotton cord, R for rayon cord, N for nylon cord, G for steel cord, and ZG for steel radial cord tires. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under defined conditions. Letters A to Z represent certified speed ratings from 4.8km/h to 300km/h. Commonly used speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h. Rim specification: Shows the rim size compatible with the tire for practical use, such as "Standard Rim 5.00F".

4

3

Share

Can Turbocharged Engines Use Ethanol Gasoline?

Turbocharged engines can use ethanol gasoline. Additional information is as follows: 1. Turbocharged Engine: A turbocharged engine refers to an engine equipped with a turbocharger. The turbocharger is essentially an air compressor that increases the intake air volume by compressing air. It utilizes the inertial force of the exhaust gas discharged by the engine to drive the turbine in the turbine chamber, which in turn drives the coaxial impeller. The impeller compresses the air delivered from the air filter pipe, pressurizing it into the cylinder. As the engine speed increases, the exhaust gas discharge speed and turbine speed also increase synchronously, allowing the impeller to compress more air into the cylinder. The increased air pressure and density enable the combustion of more fuel, and by adjusting the fuel quantity and engine speed accordingly, the engine's output power can be increased. 2. Ethanol Gasoline: Ethanol gasoline is an alternative energy source formed by blending fuel ethanol, processed from grains and various plant fibers, with regular gasoline in a certain proportion. According to China's national standard, ethanol gasoline is composed of 90% regular gasoline and 10% fuel ethanol. It is a mixture. Adding an appropriate amount of ethanol to gasoline as a vehicle fuel can save petroleum resources, reduce air pollution from vehicle exhaust, and promote agricultural production.

17

1

Share

How Soon Can You Take the Subject 4 Test After Passing Subject 3?

After passing Subject 3, there are three scenarios for the Subject 4 test schedule: 1. Taking the test directly on the same afternoon; 2. Taking the test within 9 days without an appointment—you can go to the Subject 4 test site with your ID within 9 days after passing Subject 3; 3. Making an appointment after 10 days. The success of the appointment depends on the current number of test-takers, the priority of the student, and temporary arrangements at the test center. The specific scenario depends on the driving school's arrangements. Subject 4, also known as the Subject 4 theory test or driver theory test, is part of the motor vehicle driver's license assessment. The main content includes: safe and civilized driving operation requirements, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods for situations like tire blowouts, and post-accident handling knowledge. The Subject 4 test consists of 50 questions, primarily in the form of case studies, images, and animations, with a full score of 100 and a passing score of 90.

16

1

Share

What procedures are required to transfer the vehicle license back to the local area?

What to Do When the Fuel Float Gets Stuck?

What does A/C mean in a car?

What is the Difference Between Horsepower and Power?

Roewe 350 Tire Model

Can Turbocharged Engines Use Ethanol Gasoline?

How Soon Can You Take the Subject 4 Test After Passing Subject 3?

How to Fix a Loose Rearview Mirror?

How to Check Driving License Demerit Points?

Which National Emission Standard Vehicles Cannot Be Transferred?

Where is the 2004 Fit's Cabin Air Filter Located?