What procedures are required to transfer a car to a friend?

What Issues Should Be Noted When Buying a Used BMW?

When purchasing a used BMW, pay attention to performance, structure, procedures, and appearance issues. The main issues are as follows: Performance: Listen for any abnormal sounds when starting the car, especially the engine noise. Structure: Check for any deformations. After an accident, its frame and chassis are difficult to repair. Procedures: Registration, driver's license, purchase tax, etc. Always take a test drive, whether buying a new or used car. Appearance: Inspect all corners and accessories of the car for repainting, and check for wear on tires, headlights, and bumpers.

3

5

Share

How Long Can You Drive After a Maintenance Alert?

There is no fixed answer to how long you can drive after a car prompts for maintenance—it could range from tens to hundreds of kilometers. As long as the vehicle is not experiencing any malfunctions, it can still be driven. However, owners should still pay attention to the need for regular maintenance. The maintenance tasks include: Oil and Oil Filter Replacement: The basic content of minor maintenance is replacing the engine oil and oil filter. The oil change interval also depends on the type of oil chosen by the owner. Generally, conventional mineral oil should be replaced every six months or 5,000 kilometers, semi-synthetic oil every eight months or 7,500 kilometers, and full synthetic oil can be replaced once a year or every 10,000 kilometers. Air Filter Replacement: Vehicle maintenance is not just about changing the oil; it also involves replacing the oil filter or other items that require replacement upon inspection, such as the air filter, cabin air filter, spark plugs, etc. These items should also be replaced according to the recommended intervals and should not be affected by the extended oil change cycle. Therefore, determining the maintenance cycle for a vehicle is not simply a matter of time or mileage. Owners should choose the appropriate oil based on their vehicle's specific maintenance schedule.

2

0

Share

What does a 4S car dealership mean?

A 4S car dealership is a one-stop service that integrates vehicle sales, after-sales service, spare parts, and information feedback. Below are relevant introductions about 4S dealerships: Concept of 4S Dealership: A 4S dealership, fully known as an Automobile Sales Service 4S Shop, is a car sales enterprise that combines four functions: vehicle sales (Sale), spare parts (Sparepart), after-sales service (Service), and information feedback (Survey). Advantages of 4S Dealerships: Brand advantage: Most 4S car dealerships operate well-known, highly competitive car brands with significant market share, making brand advantage their primary competitive edge. Various value-added services: After purchasing a car, consumers can access additional services. 4S dealerships can leverage their strong capabilities to offer diverse, differentiated, and personalized services. Services of 4S Dealerships: Consumers can access all value-added services related to car information, market trends, after-sales service, maintenance instructions, and spare parts supply, eliminating concerns about after-sales service, repairs, and maintenance.

17

0

Share

When driving a motor vehicle, should you press the clutch or the brake first when braking?

If the vehicle speed is too fast when braking, press the brake first and then the clutch. If the vehicle speed is relatively slow, press the clutch first and then the brake. The relevant introductions for different situations are as follows: Introduction for high speed: When the vehicle speed is too fast, the brake can effectively stop the car. The vehicle speed will decrease rapidly due to braking, and pressing the clutch at this time will result in a better stopping effect. The car body will come to a more stable stop. Moreover, pressing the brake first and then the clutch will, to some extent, reduce the wear rate of the brake pads. Pressing the clutch first when the speed is too fast may prevent the car from stopping, which can easily lead to accidents such as rear-end collisions. Therefore, when the speed is too fast, always press the brake first and then the clutch for greater safety. Introduction for low speed: When the vehicle speed is slow, pressing the clutch can basically bring the vehicle to a stop. If the speed is very slow, pressing the brake abruptly may cause the vehicle to stall directly, which can cause significant damage to the car. Stalling a car in gear generates a strong forward thrust, damaging the vehicle's transmission. Therefore, unless it's an emergency brake, when the speed is slow, you can press the clutch first to reduce the vehicle speed and then press the brake. This way, the car won't stall easily, and the transmission won't be damaged as a result.

16

4

Share

How to Turn Off the Auto Start-Stop Function on the Buick Excelle?

Method to turn off the auto start-stop function on the Buick Excelle: The start-stop function switch is located next to the ignition switch or on the center console panel. After the engine starts, the auto start-stop system becomes active. Pressing the button manually deactivates the auto start-stop system. Here is an introduction to the Buick Excelle: Power: The new powertrain includes a 1.3T+48V mild hybrid engine and the classic 1.5L-DVVT four-cylinder engine. The 1.3T+48V mild hybrid engine delivers a maximum power of 83kW/6000rpm and a peak torque of 141N·m/4400rpm. The Buick Excelle Classic is equipped with a 1.5L-DVVT four-cylinder engine, producing a maximum power of 83kW and a maximum torque of 141N·m. Safety: The Excelle is equipped with the Bosch 9.1 electronic stability program, which includes traditional ABS, TCS, and ESC functions, as well as over ten electronic safety assistance features such as EBW emergency braking reminder, all standard across the lineup, making daily driving easier and safer.

15

0

Share

What Are the Benefits of Paint Protection Film?

The advantages of paint protection film include superior abrasion resistance and long-lasting durability. Below are the detailed introductions: Superior Abrasion Resistance: Its high toughness ensures excellent abrasion resistance, effectively protecting against minor scratches, impacts, and long-term wear. The material of paint protection film is derived from TPU, a type of elastic memory repair material that can automatically repair scratches. This means you don't have to worry about minor scrapes or scratches, nor do you need to file an insurance claim. However, the self-repairing effect depends on the depth of the scratch and the usage environment. Larger damages cannot be automatically repaired. Long-lasting Durability: Paint protection film can enhance the glossiness of the car body by 5%-20%, providing stable and long-lasting protection, typically without issues for three to five years. The coating of the film effectively improves the paint's resistance to UV aging, preventing discoloration, yellowing, cracking, or peeling. Colorless and Transparent: With excellent light retention and transparency, it offers perfect protection for your car while remaining almost undetectable.

14

5

Share

What procedures are required to transfer a car to a friend?

What Issues Should Be Noted When Buying a Used BMW?

How Long Can You Drive After a Maintenance Alert?

What does a 4S car dealership mean?

When driving a motor vehicle, should you press the clutch or the brake first when braking?

How to Turn Off the Auto Start-Stop Function on the Buick Excelle?

What Are the Benefits of Paint Protection Film?

How to Properly Replace a Car Tire?

What are the differences between the 2018 and 2019 Buick Envision models?

Are there multiple-choice questions in Subject 1?

What are the body dimensions of the Fengon 370?