What procedures are required to change a seven-seater to a four-seater?

What are the effects of overfilling engine oil in a car?

Overfilling engine oil in a car can have the following effects: 1. Significantly increases the amount of oil entering the combustion chamber, leading to more carbon deposits in the combustion chamber, increasing piston movement resistance, and reducing engine power; 2. Worsens exhaust emissions, severely affecting the lifespan of the catalytic converter, and may even directly damage it; 3. Reduces engine lifespan and may cause engine oil leaks. Engine oil is a lubricant used in internal combustion engines, powering cars, motorcycles, lawn mowers, internal combustion engine generators, and many other machines. The main functions of engine oil are to reduce friction and wear on moving parts and to remove sludge and varnish from the engine.

1

2

Share

How to Replace the Battery in an Emgrand GL Key?

Steps to replace the battery in an Emgrand GL key: 1. Take out the car key and press the mechanical lock button on the side of the key; 2. Pull out the mechanical key; 3. Remove the old battery from inside the key; 4. Take out the new battery and replace it directly, paying attention to the positive and negative sides of the battery; 5. After replacing the battery, reattach the two separated parts of the key and insert the mechanical key. The Emgrand GL has a length of 4725mm, width of 1802mm, height of 1478mm, a wheelbase of 2700mm, front track of 1551mm, rear track of 1555mm, and its engine has a maximum power of 104kw and a maximum torque of 235nm.

14

1

Share

What are the effects of turning the steering wheel while stationary on the car?

Turning the steering wheel while stationary can damage the car and cause wear to the tires. When turning the steering wheel while stationary, you should slowly release the brake and turn the steering wheel gradually. If you press the brake hard while turning the steering wheel, it will cause significant wear to the tires, especially on uneven road surfaces. Therefore, it is recommended to avoid turning the steering wheel while stationary and instead turn it while the car is in motion. The specific drawbacks of turning the steering wheel while stationary are as follows: 1. Causes wear to the tire tread: Habitually turning the steering wheel while stationary increases the friction between the tires and the ground, leading to wear on the tire tread, which undoubtedly shortens the lifespan of the tires. 2. Shortens the lifespan of the power steering system: When the tires are turned while stationary, the resistance increases, and the power steering system has to work several times harder to assist with steering. Frequent operation of this nature will also shorten the lifespan of the power steering system and increase its failure rate.

5

3

Share

What brand is fronway tire?

fronway tire is produced by Qingdao Hades Tire. Below are the specific details about car tire replacement: 1. Replacement time depends on circumstances: For drivers with good driving habits, tires generally need to be replaced every 3-5 years or after driving 60,000-80,000 kilometers. If driving under harsh road conditions, such as frequently traveling on gravel roads or experiencing frequent traffic jams, sudden braking, or sharp turns, the replacement interval will be shorter. 2. Tire aging time: The main material of tires is rubber, which undergoes natural aging. This mainly manifests as the tires hardening and the sidewalls becoming covered with small cracks. The natural aging time is generally 4-5 years. Tires should be replaced promptly after 5 years to prevent the risk of blowouts. 3. Observe tire wear: If the tire wear is severe and the tread pattern is level with the wear indicator, the tires need to be replaced. Otherwise, braking on wet or slippery roads will be more difficult, and the vehicle is prone to losing control. Driving on excessively rough roads may also increase the risk of blowouts.

9

1

Share

What is the Chinese equivalent of Euro IV with OBD?

Environmental standard Euro IV OBD means that the vehicle is equipped with an OBD engine fault self-diagnosis system to meet the Euro IV standard, which is equivalent to the current China IV emission standard. Below are relevant details: 1. The China IV emission standard is the fourth stage of national motor vehicle pollutant emission standards. The main pollutants from vehicle emissions include HC (hydrocarbons), NOx (nitrogen oxides), CO (carbon monoxide), and PM (particulate matter). Through the application of technologies such as improved catalytic converter active layers, secondary air injection, and exhaust gas recirculation systems with cooling devices, these standards control and reduce vehicle emissions to below specified levels. 2. The China 3 and China 4 standards are based on the Euro 3 and Euro 4 vehicle emission standards. Compared to China 2, China 3 significantly reduces pollutant emission limits—China 3's tailpipe pollutant emission limits are 30% lower than those of China 2, while China 4 further reduces them by 60%. To ensure vehicles consistently meet emission limits during use and maintain the durability of emission control performance, requirements for On-Board Diagnostics (OBD) and in-use compliance have been added.

15

1

Share

How to Deal with Engine Oil Spraying from the Exhaust Pipe?

If the ventilation valve is aged, the only solution is to replace it, as the ventilation valve is itself a wear-prone component. It is normal for the ventilation valve to develop issues after the vehicle has been driven for a certain mileage. If the pistons, cylinder liners, or piston rings are excessively worn, replacing the corresponding components can also resolve the issue. Regular oil changes should be performed to minimize engine wear. The reasons for sudden large amounts of engine oil spraying from the exhaust pipe are as follows: 1. The crankshaft ventilation valve has aged. 2. Excessive wear of the pistons, cylinder liners, or piston rings: This can cause the engine to lose its original sealing performance, allowing engine oil to easily enter the cylinder and subsequently be expelled with the exhaust gases from the exhaust pipe. Finally, severe wear between the valve stem and valve guide can lead to oil moving up and down, which can also cause similar phenomena to occur.

5

2

Share

What procedures are required to change a seven-seater to a four-seater?

What are the effects of overfilling engine oil in a car?

How to Replace the Battery in an Emgrand GL Key?

What are the effects of turning the steering wheel while stationary on the car?

What brand is fronway tire?

What is the Chinese equivalent of Euro IV with OBD?

How to Deal with Engine Oil Spraying from the Exhaust Pipe?

What is the fuel tank capacity of the Audi Q2L in liters?

Is it necessary to armor a car?

What kind of oil does Cadillac generally use?

How long does it take to receive the SMS notification after booking the Subject 1 test?