What procedures are required for vehicle inspection now?

2 Answers
MacLeah
07/29/25 4:47am
You need to prepare your ID card, vehicle license, and compulsory traffic insurance policy. The following is relevant information about vehicle inspection: 1. Concept: Also known as motor vehicle inspection. The inspection items and scope vary depending on the nature of the vehicle's use. The vehicle owner or unit must fill out the "Annual Vehicle Inspection Form" and send the vehicle to the designated location for annual inspection on the date specified by the local vehicle management office. After the vehicle passes the inspection, the vehicle management authority will affix a seal on the vehicle license and the "Annual Vehicle Inspection Form" indicating (Inspected and approved by ** Vehicle Management Office in ** year). 2. Legal basis: "Road Traffic Safety Law of the People's Republic of China".
Was this review help?
12
2
Share
McAdelyn
08/12/25 8:28am
As a frequent driver, I just had my annual vehicle inspection last year. The procedure is actually quite simple but requires patience. First, prepare the original copies of your ID card, driver's license, vehicle registration certificate, and a copy of the compulsory traffic insurance policy. Drive to an authorized inspection station nearby, preferably during off-peak hours like weekday mornings to avoid long queues. During the inspection, they'll check tire wear, headlight brightness, brake response, exhaust emissions, and other items. If the lights don't work or the brakes fail, you'll need to get them fixed and retested, so I recommend checking these key components at home beforehand to save time. After passing, pay the fee (usually 200-300 yuan) and get the annual inspection sticker to place on your windshield. The whole process takes about one to two hours. Regular inspections ensure vehicle safety and help avoid traffic fines.
Was this review help?
18
1
Share
Expand All
More Forum Discussions

How to Turn On the Mercedes-Benz Central Control Screen?

Mercedes-Benz central control screen can be turned on by the following methods: 1. The switch for the Mercedes-Benz central control screen is located on the central control panel. 2. There is a button on the central control panel with a circular symbol. 3. Press this button to turn on the car's central control screen. Additional Information: 1. The central control panel also has many other functions, such as volume keys, multimedia menu, audio menu shortcuts, return key, automatic parking, parking radar switch, etc. 2. The full name of Mercedes-Benz is Mercedes-Benz, and its Chinese abbreviations include Pingzhi, Pengchi, Benchi, and Binshi. Mercedes-Benz is a German automobile brand, the inventor of the automobile, and is considered one of the most successful premium automobile brands in the world.
1
2
Share

Where to Install ETC?

For small cars, the ETC device is generally installed in the upper middle part of the front windshield, while for large vehicles such as trucks and buses, the installation position is in the middle to lower part. The suitable installation position should be no lower than 1.2 meters and no higher than 2.5 meters, with an installation angle between 30 and 90 degrees. For vehicles with factory-installed or aftermarket explosion-proof film, which may affect the signal transmission of the microwave communication link, the ETC should be installed in the microwave sunroof strip. ETC stands for Electronic-Toll-Collection, meaning electronic toll collection system. To apply for ETC, you need to provide the original and photocopy of the vehicle owner's valid ID card and vehicle registration certificate. If the application is not made by the owner, the agent's valid ID card is also required. The photocopy of the vehicle registration certificate should include the page with the most recent annual inspection seal. Additionally, a bank card for deducting highway toll fees is required, and the vehicle must be registered under the name of an individual aged between 18 and 60. Here are some precautions for installing ETC: Do not obstruct the view; it is best to install it behind the rearview mirror: Many car models have a large inclination angle of the windshield, which reduces the driver's field of vision. If this is not considered during ETC installation, it will increase the driver's blind spots. Installing it behind the right side of the rearview mirror can avoid obstructing the view. Do not affect charging: The ETC electronic tag consumes power but generally does not require charging or battery replacement because it has a solar panel on the back that can charge itself. Therefore, during installation, avoid the black areas on the windshield and positions that may block the solar panel. Do not remove it arbitrarily once installed: The button in the middle of the adhesive is an anti-removal lever connected to a switch. After installation, the windshield will press the anti-removal lever in. If the tag is removed arbitrarily, the lever will pop out and trigger the switch, locking the electronic tag and rendering it unusable. You will then need to visit an ETC service point to unlock it. This mechanism is designed to prevent multiple vehicles from sharing one device. Things to note when using ETC: The ETC transaction sensing range is 8 meters. To prevent the ETC device of the vehicle in front from malfunctioning, maintain a distance of more than 10 meters from the vehicle in front to avoid automatic toll payment for the wrong vehicle. The ETC lane recognizes vehicles at a speed of 20 kilometers per hour; driving too fast may result in failure to read the vehicle's device information and thus failed toll deduction. When using a debit card linked to ETC, insufficient balance will also cause toll deduction to fail.
5
5
Share

What is the ground clearance of the Magotan?

Magotan has a minimum ground clearance of 114mm when fully loaded and 145mm when unloaded. More details about ground clearance are as follows: 1. Ground clearance refers to the distance between the lowest point of the car (excluding wheels) and the supporting surface when fully loaded and stationary, which is used to indicate the car's ability to pass over obstacles such as stones and stumps without collision; 2. The greater the ground clearance, the stronger the vehicle's ability to pass over obstacles or uneven ground, but the higher the center of gravity, which reduces stability; 3. The smaller the ground clearance, the weaker the vehicle's ability to pass over obstacles or uneven ground, but the lower the center of gravity, which can increase stability.
14
2
Share

How to Use Auto Hold Correctly?

Correct usage of auto hold: 1. Press the car's brake pedal; 2. Press the car's one-touch start button; 3. The car's dashboard lights up, and the vehicle's power is turned on; 4. Press the autohold button inside the car to activate the auto hold mode. Here are some related details: 1. Auto hold refers to the vehicle's intelligent electronic parking brake, a function within the braking system. It automatically engages the parking brake for safety after the vehicle stops, and lightly pressing the accelerator will automatically release the parking brake effect. 2. Conditions for activating the auto hold system: (1) Press the autohold button to turn on the function, and the indicator light will illuminate; (2) The vehicle is in the started state; (3) The driver's door is closed; (4) The driver has fastened the seatbelt; (5) The vehicle speed is zero, and the brake pedal is pressed to activate auto hold.
19
5
Share

How to set up one-touch window lift for ix35?

Pull the driver's side window switch all the way up, then hold the one-touch window lift switch for more than 5 seconds to complete the setup. Below is related information about one-touch window lift: 1. Cars equipped with one-touch window lift have two positions for the window control switch. The first position works like a regular power window, while the second position allows the window to automatically open or close completely with a single press and release. 2. Windows with one-touch lift feature anti-pinch protection. If a hand is accidentally placed in the window during operation, the window will immediately stop and reverse. 3. One-touch window lift is a system that allows the car window glass to be fully opened or closed with a single button press.
18
4
Share

Where is the car differential installed on the vehicle?

The car differential is installed near the drive wheels. The function of the differential is to meet the requirement that the wheels on both sides rotate at different speeds when the car turns. The car differential enables the left and right (or front and rear) drive wheels to rotate at different speeds. It mainly consists of left and right side gears, two planetary gears, and a gear carrier. The inspection methods for the differential are as follows: 1. Inspection of planetary gears: Check the fit between the planetary gear shaft and the housing hole as well as the inner hole of the planetary gear. The planetary gear shaft and the gear are clearance fit, and they should be replaced if severely worn. When placing the planetary gear shaft into the differential housing bearing hole, no warping is allowed. 2. Inspection of the differential housing: Check the contact surface between the driven bevel gear and the differential housing to ensure they are in full contact. 3. Inspection of the working surfaces of planetary gears and side gears: Obvious peeling or burning on the working surfaces of planetary gears and side gears is not allowed, otherwise they should be replaced. If the damage exceeds 1/4 of the tooth height or 1/5 of the tooth length, replacement is necessary. 4. Inspection of the meshing clearance between planetary gears and side gears: The wear of planetary gears and side gears is determined by checking their meshing clearance.
14
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.