What procedures are required for vehicle deregistration?

1 Answers
VanIsla
07/29/25 3:39pm
Required: ; Vehicle Registration Certificate; Vehicle License; License Plate; Owner's ID Card. To deregister at the DMV, the vehicle must be surrendered. Below is relevant information about vehicle scrapping: 1. Non-commercial vehicles: According to the Road Traffic Law of the People's Republic of China, non-commercial vehicles have a scrapping period of 15 years for cars and 10 years for motorcycles; commercial vehicles require mandatory annual inspections, with a scrapping period of 10 years for cars. 2. Private cars: The usage period for 'private cars' is more lenient. According to regulations, non-commercial passenger vehicles with 9 seats or fewer have a normal usage period of 16 years, with an extended usage period from the 16th to the 20th year, during which they must be inspected twice annually. 3. Other vehicles: The scrapping periods vary for other types of vehicles. Among passenger vehicles, commercial large buses have a normal usage period of 10 years, with a 2-year extension, requiring two annual inspections during this period, followed by an additional usage period of 1 to 2 years, totaling 14 years. Non-commercial buses with more than 9 seats have a normal usage period of 10 years, with a total usage period of 20 years. Large trucks have a normal usage period of 10 years, totaling 14 years; light trucks with a gross weight between 1.8 tons and 6 tons have a normal usage period of 10 years, totaling 15 years, while mini trucks with a gross weight of 1.8 tons have a normal usage period of 8 years, with no extension allowed, totaling 8 years.
Was this review help?
12
3
Share
More Forum Discussions

What Passenger Vehicles Can an A2 Driving License Drive?

A2 driving license can drive passenger vehicles with up to 19 seats. Here are the relevant details about the A2 driving license: 1. Approved Vehicle Types: The A2 license is primarily for tractor-trailers, allowing the holder to operate heavy and medium-sized full trailers/semi-trailers. There are two types of trailers: full trailers and semi-trailers. A full trailer bears its total weight entirely, while a semi-trailer shares part of its weight with the towing vehicle. Only drivers with an A2 license can operate these tractor-trailers; even those with an A1 license are not permitted. 2. Other Vehicle Types: The A2 license also permits driving the following vehicle types: B1 (medium-sized passenger vehicles), B2 (large trucks), C1 (small cars), C2 (small automatic transmission cars), C3 (low-speed trucks), C4 (three-wheeled vehicles), and M (wheeled self-propelled machinery).
7
5
Share

How Should Beginners Drive in the Rain?

Beginners should drive cautiously in rainy weather. Here is relevant information for beginners driving in the rain: 1. Driving tips: (1) Remove fog and improve visibility: If there is fog, do not use natural wind; instead, set the air vent to blow on the "windshield" position. (2) Drive slowly and use brakes carefully: Reduce speed and avoid sudden braking. When slowing down, primarily control speed with the accelerator. (3) Prevent skidding: Lower your speed when turning and avoid sudden braking. 2. Road selection tips for rainy days: (1) Choose flat over sloped: When driving on a slope, choose the flat part. If conditions don’t allow, try to pass straight through, converting a sloped section into a flat one, and strive to keep the vehicle horizontally level. (2) Choose hard over soft: Soft roads increase driving resistance, leading to insufficient power and reduced speed. Therefore, in rainy weather, the center of the road is firmer due to repeated wheel pressure, while the edges are softer. (3) Choose water over mud: When driving through muddy areas, wheels can become coated with slippery mud. Driving through water prevents mud from sticking to the wheels, maintaining traction with the hard ground and ensuring progress compared to soft surfaces. Remember not to drive too fast in water to prevent splashing, which could cause electrical shorts and engine stalling.
13
2
Share

What is the reason for the steering wheel not returning to center?

The steering wheel not returning to center may be caused by the following reasons: 1. Stiff steering ball joints: Lack of maintenance can lead to stiff or overly tight steering ball joints, or incorrect toe alignment. 2. Uneven tire pressure between left and right tires: Uneven tire pressure in the front left and right tires can also cause this issue. For 99% of vehicles, the steering wheel should automatically return to center after turning. Here are solutions for misaligned steering: 1. Adjust four-wheel alignment: Generally, when a vehicle exhibits steering wheel not returning to center, the first solution to consider is adjusting the four-wheel alignment. Four-wheel alignment refers to the relative positional relationship between the wheels and the chassis (wheels, steering knuckles, front axle, etc.). If the four-wheel alignment parameters change, it can lead to issues such as steering wheel not returning to center, heavy steering, steering pull, and tire wear. 2. Replace the steering gear: If the steering wheel still does not return to center after adjusting the four-wheel alignment, then the four-wheel alignment can be ruled out as the cause. After eliminating four-wheel alignment, the most likely cause is the steering gear. When the steering gear malfunctions and its reverse efficiency decreases, the steering wheel will have difficulty returning to center.
6
1
Share

How Often Should BMW Brake Pads Be Replaced?

BMW 5 Series brake pads generally need to be replaced every 80,000 kilometers. Automotive brake pads are typically composed of a steel plate, an adhesive heat insulation layer, and a friction block. The steel plate is coated to prevent rust, and the coating process is monitored using an SMT-4 furnace temperature tracker to ensure the temperature distribution during coating meets quality standards. When purchasing brake pads, pay attention to the "Four Checks and Two Selections": 1. Four Checks: (1) First, check the friction coefficient. The friction coefficient determines the basic braking torque of the brake pads. If it's too high, it can cause wheel lock-up, loss of control, and pad burning during braking. If it's too low, the braking distance will be excessively long. (2) Second, check safety. Brake pads generate instantaneous high temperatures during braking, especially during high-speed driving or emergency braking. Under high temperatures, the friction coefficient of the pads may decrease. (3) Third, check comfort. This includes braking feel, noise, dust, smoke, and odors, which directly reflect the friction performance. (4) Fourth, check lifespan. Typically, brake pads should last for about 30,000 kilometers. 2. Two Selections: (1) First, choose brake pads produced by reputable manufacturers, which should have a license number, specified friction coefficient, and compliance with execution standards. The packaging should include a certificate of compliance, production batch number, and production date. (2) Second, opt for professional installation at a certified repair shop.
3
5
Share

How to Connect the Positive and Negative Terminals of a Car Battery?

Connect the positive terminal to the main line and the negative terminal to the ground wire, which is connected to the vehicle's chassis. Here is more information about car batteries: 1. Definition: A car battery is a type of battery that can be recharged and reused after discharge, also known as a storage battery. 2. Main uses: (1) Starting battery: Mainly used for starting and lighting in cars, motorcycles, tractors, diesel engines, etc. (2) Stationary battery: Mainly used as a backup power source for protection and automatic control in communications, power plants, and computer systems. (3) Railway battery: Mainly used for starting, lighting, and power in railway diesel locomotives, electric locomotives, and passenger cars.
8
2
Share

How to Distinguish Between Mercedes-Benz S and Maybach?

Here are the differences between Mercedes-Benz S and Maybach: 1. From the perspective of body length, the biggest difference between Maybach and the standard S-Class is the extended rear doors, resulting in significantly greater overall length and wheelbase. 2. The Maybach S-Class features the exclusive "Double M" logo on the C-pillar, and Maybach models mostly come with large wheels, while the Mercedes-Benz S typically uses multi-spoke rims. 3. Compared to the standard S-Class, Maybach models have front and rear bumpers and grilles adorned with more extensive chrome trim, which can be achieved through modifications. The only unalterable feature is the exclusive small triangular rear window of the Maybach S-Class, which does not move with the door. The door lines are nearly right-angled, making it more convenient for passengers to get in and out.
20
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.