···
Log in / Register

What procedures are required for vehicle annual inspection?

1 Answers
Julio
07/25/25 4:37am

The procedures required for vehicle annual inspection are as follows: Filling out forms: Fill out two forms: the Motor Vehicle License Application Form and the Motor Vehicle Inspection Record Form; proceed to the annual inspection registration window for material review and entry; go to the violation inquiry window, and if there are any violations, pay the fines here; Vehicle inspection: Find an inspector for the vehicle's external inspection, which requires opening the hood and checking the frame number. The inspector will provide a signed page confirming the inspection is passed. Then, proceed to the inspection fee payment window to receive an invoice; go to the inspection registration window and leave all materials there; wait in line for the inspection, and after completion, receive an inspection report; submit the annual inspection materials to the staff; if the inspection is passed, the annual inspection sticker will be issued.

Was this review help?
5
3
Share
More Forum Discussions

How to Remove the Strong Odor of Seafood in the Car?

If your car smells strongly of seafood, here are some methods to remove the odor: 1. Air Fresheners: Place car air fresheners, perfumes, scented candles, or fragrance sachets in the car. When choosing car air fresheners, besides focusing on product quality, opt for those with a fresh scent. The advantage is the variety of styles, as some air fresheners are beautifully designed and can also serve as car decorations. The downside is that they only mask the odor rather than eliminate it. 2. Using Fruits to Remove Odors: Some fruits, such as lemons, oranges, and pineapples, can help neutralize the smell. The natural fragrance of these fruits will gradually spread in the car, covering up the unpleasant odor. The advantage is that these natural 'air purifiers' are effective, low-cost, and easy to use. The disadvantage is that, like car air fresheners, fruits only temporarily mask the odor rather than eliminating it completely.
7
5
Share

What Causes High Idle Speed When the Engine is Cold?

High idle speed when the engine is cold is normal and intentionally designed by engineers to allow the engine to warm up quickly. Automotive engines have an optimal operating temperature range - engine temperature is not the lower the better. If the engine temperature is too low, it can lead to increased fuel consumption, reduced power output, and higher exhaust emissions. Some drivers tend to warm up the engine by idling after a cold start, but this practice is unnecessary. The engine warms up relatively slowly during stationary idling. The correct way to rapidly increase engine temperature is to start driving shortly after engine startup. Engaging gears and driving increases engine load, which enables faster warm-up.
6
3
Share

How to turn on the rear seat air conditioning in the Lynk & Co 01?

The rear seat air conditioning in the Lynk & Co 01 does not have a separate switch, only air vents. Simply push the central roller upward to open the air vent. The rear seat air conditioning in the Lynk & Co 01 is a comfort feature that shares the same compressor with the front air conditioning, and the airflow can usually be adjusted independently. The Lynk & Co 01 is a compact SUV launched by Lynk & Co, with dimensions of 4549mm in length, 1860mm in width, and 1689mm in height, and a wheelbase of 2734mm. It is equipped with a 2.0T turbocharged engine, delivering a maximum power of 160kW and a maximum torque of 325Nm, paired with an 8-speed automatic transmission.
20
0
Share

What Causes a Tingling Sensation When Pressing the Accelerator?

A tingling sensation when pressing the accelerator is a typical symptom of engine misfiring. The car may feel jerky, acceleration seems sluggish, and slight vibrations may be noticeable while driving. This occurs when one of the four cylinders stops working, causing an imbalance in power output, leading to noticeable vibrations and delayed acceleration. Below are the relevant troubleshooting steps: 1. Problem Detection: First, use a diagnostic tool to check for misfire fault codes or identify which cylinder is not functioning. Once the faulty cylinder is identified, inspect the ignition coil's spark intensity, check for spark plug insulation breakdown, and test the fuel injector for proper signal and fuel delivery. Alternating component assembly can help isolate the issue. 2. Problem Analysis: If the above checks show no issues, examine cylinder compression. Even for models with low compression, it should not fall below 9 bars, while high-compression engines typically require 15-16 bars. If all the above are normal, revisit the basics: read fault codes again, check for excessively retarded timing, and verify if any engine sensors are sending incorrect signals.
20
5
Share

Which region does the license plate 'Dong' belong to?

Currently, there is no license plate with the prefix 'Dong'. The first character of a license plate is a Chinese character, representing the provincial-level administrative region where the vehicle is registered, which is the abbreviation of the province, municipality, or autonomous region. The second character of a license plate is an English letter, indicating the prefecture-level administrative region where the vehicle is registered, corresponding to the letter code of the prefecture-level city, district, autonomous prefecture, or league. A license plate serves as an identification number for a vehicle, much like an ID card does for a person. For automobiles, the license plate number is structured in two rows: the upper row is the vehicle registration authority code, and the lower row is the license plate number. For motorcycles, the license plate number is arranged horizontally, with the vehicle registration authority code on the left and the license plate number on the right.
19
5
Share

How to Remove the Front Bumper of the Languid?

The method for removing the front bumper of the Languid: First, remove the clips on the left and right inner fenders. After prying open the inner fenders, there are screws on the inner side of the bumper corners. Then, you can forcefully pry it open. Open the hood and remove the clips on top of the bumper. Use a flat-head screwdriver to pry open the notches of the clips to release them. Finally, remove the clips and screws underneath. The Languid is a compact car launched by Beijing Hyundai, with dimensions of 4570mm in length, 1775mm in width, and 1445mm in height, and a wheelbase of 2700mm. It is equipped with a 1.6L naturally aspirated engine, delivering a maximum power of 93.8kw and a maximum torque of 156nm, paired with either a 6-speed manual or a 6-speed automatic transmission.
1
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.