What procedures are required for truck registration?

1 Answers
DeAlexandra
09/04/25 2:04am
Truck registration requires the following procedures: Obtain the vehicle qualification certificate: The vehicle qualification certificate is very important and is a necessity for vehicle registration. Therefore, it is essential to obtain the vehicle qualification certificate as soon as possible. Communicate more with the 4S store and maintain a firm attitude. Keep the triplicate car purchase invoice: After purchasing the vehicle, the 4S store will issue a triplicate car purchase invoice, which must be kept properly as it will be used for subsequent registration processes. The invoice consists of red, yellow, and blue copies, with the yellow copy usually retained by the buyer. Pay the vehicle purchase tax and obtain the original and duplicate tax certificates: After purchasing the vehicle, the vehicle purchase tax should be paid as soon as possible, usually at the nearest vehicle management office. After successfully paying the vehicle purchase tax, the original and duplicate tax certificates will be issued, and it is important to keep them safe. Prepare various documents: Prepare the original and photocopy of the ID card in advance. Non-local residents should provide the original and photocopy of the temporary residence permit.
Was this review help?
17
3
Share
More Forum Discussions

What are the precautions for curve driving in Subject 2?

Subject 2 curve driving should pay attention to: 1. Maintain driving in first gear and avoid steering too sharply. 2. After entering the curve, try to drive in a large circle. When driving into a right curve, keep the right wheel close to the right edge line of the road. 3. When entering the curve, use the steering wheel to keep the small rearview mirror on the inner side of the car's hood always at the edge of the outer white line, neither crossing the line nor staying too far from the edge line. The following are the teaching objectives of Subject 2: 1. Master the basic driving operation essentials and possess the basic ability to control the vehicle. 2. Proficiently master the basic methods of driving on the site and internal roads, possess the ability to reasonably use vehicle control components and correctly control the spatial position of the vehicle, and be able to accurately control the vehicle's driving position, speed, and route.
16
0
Share

Reasons for the Non-functioning of the Left Front Door Window Regulator in Nissan Sylphy

The main reasons for the non-functioning of the left front door window regulator in Nissan Sylphy are a short circuit in the fuse; short circuit in the connecting wires or loose related connectors; damage to the relevant relay or switch; damage to the motor; corrosion or looseness of the grounding wire. Below are the diagnosis and troubleshooting steps for a non-functioning window regulator: Check if the fuse is blown, then inspect whether all connectors are securely and reliably connected; check if the power line is energized and if the voltage is normal; verify that the grounding wire is properly and securely grounded; finally, inspect whether the switch, relay, and motor are damaged. If any component is confirmed to be damaged, it should be replaced with a new one.
14
5
Share

Is 95 Octane Gasoline Mandatory for the Lynk & Co 03?

Lynk & Co 03 does not strictly require 95 octane gasoline. The minimum fuel requirement for the Lynk & Co 03 is 95 octane, as all models in this series are equipped with turbocharged engines. Below are detailed specifications of the Lynk & Co 03 engines: 1. The Lynk & Co 03 is powered by two engines: a 1.5-liter turbocharged engine and a 2.0-liter turbocharged engine. 2. The 1.5-liter turbocharged engine, coded as JLH-3G15TDC, delivers a maximum power of 115 kW and a peak torque of 245 Nm. It reaches its maximum power at 5,000 rpm and peak torque between 1,450 and 4,000 rpm. This engine features direct fuel injection and utilizes an aluminum alloy cylinder head and block. It is paired with either a 6-speed manual transmission or a 7-speed dual-clutch transmission. 3. The 2.0-liter turbocharged engine produces a maximum power of 140 kW and a peak torque of 300 Nm, achieving maximum power at 4,700 rpm and peak torque between 1,400 and 4,000 rpm. This engine also incorporates direct fuel injection and an aluminum alloy cylinder head and block. It is matched with a 6-speed automatic transmission.
9
1
Share

What is the reason for the friction sound in the Sportage steering wheel?

If the steering wheel makes a strong friction sound when turning, the reason is likely a malfunction in the fixed bracket connected to the steering wheel. This is because the rotation between the steering wheel and the rear fixed bracket must be completed by bearings, and the mutual friction of the bearing contact surfaces will produce sound due to a lack of lubricating oil. Adding some lubricating oil can help avoid this situation. Relevant information about the car steering wheel is as follows: 1. Function: Its function is to convert the force applied by the driver to the edge of the steering wheel into torque and then transmit it to the steering shaft. 2. Correct grip: If the steering wheel is regarded as a clock face, the correct hand position is to hold the left hand between nine and ten o'clock and the right hand between three and four o'clock. In the event of a collision, this posture is more conducive to supporting the body.
20
1
Share

What car brand is represented by one horizontal and two vertical lines?

A circle with one horizontal and two vertical lines represents the logos of Hyundai and Honda. The Hyundai logo features an oval with a slanted letter "H" inside, where the oval symbolizes the Earth, representing Hyundai's global business management strategy. The letter "H" stands for the first letter of "HYUNDAI," the English name of Hyundai Motor Company. The Honda logo is simply the first letter "H" of the English word "Honda," symbolizing Honda's technological innovation, employee excellence, and solid business operations. Here is some related information about joint-venture cars: 1. Introduction: Joint-venture cars are products of projects established by Chinese and foreign investors. The Chinese side contributes by providing land and factory usage rights, as well as capital, while the foreign investors contribute their brand, technology, capital, and talent. Joint-venture cars are assembled domestically with technology, talent, and brands provided by foreign partners, but the core technology is still controlled by the foreign side. 2. Joint-venture brands under the FAW Group include: FAW-Volkswagen, FAW-Audi, FAW-Mazda (all produced in Changchun, Jilin), and FAW-Toyota (produced in Changchun, Jilin; Tianjin; and Chengdu, Sichuan).
6
3
Share

What to Do If the First Maintenance Period is Missed?

If the first maintenance period is missed and the first maintenance has not been performed, the warranty eligibility will be revoked, and subsequent maintenance will require payment. It is recommended that the car owner immediately go to the 4S dealership for the first maintenance. The first maintenance for a car is very simple, generally requiring only an oil change and replacement of the oil filter. The mileage for the first maintenance is usually 5,000 kilometers, and car owners must ensure they attend the first maintenance on time. Precautions for the first maintenance are as follows: 1. The first maintenance period is calculated from the date the car is picked up, i.e., from the day the car owner takes delivery of the vehicle. 2. The first maintenance period is determined by two indicators: mileage and time, whichever comes first. Exceeding either of these will affect the warranty. According to relevant regulations, missing the first maintenance date is considered an automatic forfeiture of the first maintenance rights. If the first maintenance is not performed, any future quality issues with the car will not be covered under warranty. Therefore, car owners must pay attention to the dealer's reminders and should never miss the first maintenance deadline. 3. The first maintenance period and maintenance cycles vary by vehicle. Some cars require maintenance at 2,000 kilometers, while others may go up to 8,000 kilometers. This is due to differences in the specific technical conditions of the vehicles. The engine has a break-in period, and different car makes, brands, or even models come with engines of varying designs. Some engines are made of better materials and have higher precision, resulting in relatively less wear, while others may have higher oil requirements or even special specifications. 4. Some suggest performing the first maintenance 1,000 kilometers earlier than the mileage specified in the maintenance manual. In reality, there is no need to perform the first maintenance ahead of schedule. As for regular maintenance, it also depends on the car's brand and usage conditions. Generally, maintenance is performed every 5,000 kilometers or every 3 months, especially for oil changes, as oil has a shelf life. If the car is used less frequently and is in good condition, the interval can be extended to 6 months. 5. It is better to drive at high speeds after the first maintenance. Driving at high speeds actually refers to increasing the engine's RPM. Higher engine speeds increase mechanical wear. The first batch of oil contains the most metal shavings and impurities. Using this oil for high-speed driving would significantly increase engine wear. After the first oil change, the engine has undergone some break-in, and the newly replaced oil contains fewer shavings, making it suitable for high-speed break-in.
10
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.