What procedures are required for the annual inspection of private cars?

2 Answers
MacElle
07/24/25 5:52pm
Driving license, driver's license (one or more), compulsory insurance policy (copy), 100 yuan. The following is a related introduction about vehicle annual inspection: 1. Concept: Vehicle annual inspection refers to a mandatory test for every vehicle that has obtained an official license plate and driving license. It is equivalent to an annual physical examination for the vehicle according to the "Technical Conditions for Motor Vehicle Operation Safety", which helps to eliminate potential safety hazards in a timely manner, encourages enhanced vehicle maintenance, and reduces the occurrence of traffic accidents, commonly referred to as vehicle inspection. 2. Legal provisions: Vehicle annual inspection, commonly known as vehicle inspection, is stipulated in the relevant provisions of the "Road Traffic Safety Law Implementation Regulations". Motor vehicles should undergo safety technical inspections according to the following periods from the date of registration: passenger vehicles for operation should be inspected once a year within 5 years; after exceeding 5 years, they should be inspected every 6 months.
Was this review help?
8
2
Share
DiCatherine
08/11/25 9:52am
I recently had my private car inspected for its annual check-up, and the process went relatively smoothly. First, you need to bring the original vehicle license, which is the most basic proof of ownership. Don't forget the copy of the compulsory insurance policy, which the insurance company can provide as a printout. You'll also need proof of the owner's identity, such as a photocopy or the original ID card. It's best to make an appointment with the inspection station in advance to avoid long queues. The inspection station will check key components like the lights, brakes, and emissions. Once it passes, you'll receive the inspection report. Then, take the report to the vehicle management office to get the annual inspection sticker and pay a small fee. I recommend doing a quick self-check of the lights and brakes beforehand to avoid minor issues that could cause a failure and waste time and money. The whole process takes about half a day, so don't delay until it expires—otherwise, you might get into trouble if stopped by the authorities.
Was this review help?
19
4
Share
Expand All
More Forum Discussions

How wide is a bidirectional six-lane road?

The subgrade width of a bidirectional six-lane road is 33-36 meters. Here is the relevant introduction: A bidirectional six-lane road refers to a road with six lanes for vehicles to travel longitudinally, with every three lanes arranged in the same direction. According to national standards, the design speed should not exceed 60 kilometers per hour, with each lane being 3.5 meters wide, resulting in a subgrade width of 33-36 meters for bidirectional six-lane roads. At traffic light intersections, the three lanes in the upward direction of a bidirectional six-lane road are divided into left-turn, straight, and right-turn red light waiting lanes. Bidirectional six-lane roads are widely used in prefecture-level cities, generally with asphalt or cement pavement. The lanes in each direction are sequentially divided into left, middle, and right forms, which helps maintain traffic order.
16
0
Share

Will hitting the chassis on a step be very serious?

There are two scenarios when the chassis hits a step: Minor impact: If the impact is not too strong, it's generally not a problem. During the design phase, car chassis are engineered with certain impact resistance. The most vulnerable parts of a car's chassis are various pipelines, such as brake hydraulic lines and fuel pipes, but these pipelines are concealed and protected within grooves of the chassis steel plates, never protruding above the chassis plane. Severe impact: It's recommended to visit a 4S dealership where they have chassis lifts. After elevating the vehicle, inspect for any damage. If the impact involves protruding rocks on the ground, such point-contact collisions may cause the rocks to hit the pipelines in the grooves, potentially leading to oil or fluid leaks, which poses significant hazards.
1
5
Share

What type of engine oil does the Toyota Vios use?

Toyota Vios uses 5W20 and 5W30 engine oil. The functions of engine oil are: 1. Lubrication to reduce wear; 2. Cooling and temperature reduction; 3. Shock absorption and buffering. Taking the 2021 Toyota Vios as an example, it belongs to the compact car category, with body dimensions of: length 4435mm, width 1700mm, height 1490mm, a wheelbase of 2550mm, a fuel tank capacity of 42 liters, and a curb weight of 1070kg. The 2021 Toyota Vios is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 110PS, a maximum power of 81kW, and a maximum torque of 138Nm, paired with a 5-speed manual transmission.
1
3
Share

What is the difference between maintenance and repair?

Repair is for when something is already broken, while maintenance is about identifying potential issues in advance. Here are the relevant explanations: 1. Definition of car maintenance: Car maintenance refers to preserving and restoring a vehicle's technical performance, ensuring it maintains good usability and reliability. 2. Advantages of car maintenance: Car maintenance involves extensive knowledge. Timely and proper maintenance can extend a vehicle's service life, enhance safety performance, save money, and avoid many repair troubles. However, the concept of "repairing instead of maintaining" still persists among drivers today, leading to frequent traffic accidents caused by lack of maintenance or improper upkeep. Timely and correct car maintenance is a crucial aspect of extending vehicle lifespan and ensuring driving safety. What we commonly refer to as car maintenance primarily involves work aimed at maintaining the vehicle's good technical condition and prolonging its service life.
11
0
Share

What is the material of brake pads?

The materials of brake pads are: 1. Asbestos, cellulose, sintered glass; 2. Carbon fiber friction material; 3. Powder metallurgy friction material; 4. Semi-metallic friction material. Brake pad replacement method: 1. Open the engine compartment to check the brake fluid level to prevent overflow during replacement; 2. Remove the wheel where the brake is located; 3. Remove the bolts of the brake caliper and take out the brake pads; 4. Install new brake pads, tighten the guide bolts, and complete the replacement. The working principle of brake pads is to use the friction between the brake pads and the brake drum, as well as between the tires and the ground, to convert the kinetic energy of the vehicle into heat energy after friction, thereby stopping the car.
20
3
Share

Introduction to the 2021 GAC Honda Haoying Model

GAC Honda Haoying introduction is as follows: The dimensions are: length 4634mm, width 1855mm, height 1679mm, wheelbase 2661mm, fuel tank capacity 53L, curb weight 1520kg, drive type front-wheel drive, tire specification 235-55r19. Suspension: The front suspension of this car uses MacPherson independent suspension, and the rear suspension uses multi-link independent suspension. Power: The Honda Haoying is equipped with a 1.5L 4-cylinder turbocharged engine, with a maximum horsepower of 193ps, maximum power of 142kw, matched with a 6-speed manual transmission.
12
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.