What procedures are required for the annual inspection of a used car?

1 Answers
HannahLynn
07/30/25 8:58am
Preparation of annual inspection materials: 1. The vehicle. 2. The driving license, with both the original and duplicate copies intact. 3. A motor vehicle third-party liability insurance policy or a copy of it, valid for one year and within the validity period, along with the insurance card. 4. Proof of identity and a copy of the identity proof. For company vehicles, the agent's identity proof is required. Preparation for the annual inspection: 1. Check whether the insurance policy is correct, especially for the first annual inspection of a new car. If the information on the insurance policy does not match the actual situation, correct it with the insurance company. 2. If you need to replace the environmental protection label, go to the auto repair shop designated by the environmental protection bureau in advance to have the exhaust gas tested to save time. 3. Clear any traffic violations at the traffic police station.
Was this review help?
9
4
Share
More Forum Discussions

Why does the Magotan auto start-stop sometimes not work?

Magotan auto start-stop sometimes does not work because the start-stop function is turned off, or when the battery power is insufficient, the start-stop function will also be temporarily suspended. The engine auto start-stop is a system that automatically shuts off the engine when the vehicle comes to a temporary stop (such as waiting at a red light) during driving, and automatically restarts the engine when it needs to move forward again. The Magotan is equipped with a 1.4T turbocharged engine, with a maximum power of 110 kW, a maximum power speed of 5000 to 6000 rpm, a maximum torque of 250 Nm, and a maximum torque speed of 1750 to 3000 rpm.
14
4
Share

What is the latest generation of Accord?

The latest generation of Accord is the tenth generation. The dimensions of the tenth-generation Accord are 4893mm in length, 1862mm in width, and 1449mm in height, with a wheelbase of 2830mm and a fuel tank capacity of 56L. It is equipped with a 1.5T turbocharged engine, delivering a maximum power of 143 kW and a maximum torque of 260 N·m, paired with a CVT continuously variable transmission. The tenth-generation Accord is a mid-size 4-door 5-seater sedan under GAC Honda, featuring front-wheel drive, MacPherson strut front suspension, multi-link rear suspension, and tires sized 225/50R17.
6
0
Share

How to Add Coolant to the 10th Generation Civic?

The method for adding coolant to the 10th Generation Civic is as follows: First, check the coolant level in the reservoir. When the coolant level is below the minimum mark, add coolant until it reaches the maximum mark. Coolant is a special additive-containing liquid primarily used in liquid-cooled engine cooling systems. It offers excellent performance in preventing freezing in winter, boiling in summer, and protecting against scale and corrosion year-round. The 10th Generation Civic is equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 177 PS, a maximum power output of 130 kW, and a maximum torque of 220 Nm, paired with a continuously variable transmission (CVT).
12
1
Share

Can I wear colored contact lenses for my driver's license photo?

You cannot wear colored contact lenses when taking a driver's license photo, nor during the medical examination. Here are the relevant requirements: 1. Driver's license photo requirements: Colored glasses are not allowed, as reflections or obstruction of the eyes will render the photo invalid, requiring a retake. The photo must be taken within the last 6 months, with clear facial recognition, no heavy makeup, and no exaggerated accessories that significantly alter appearance. 2. Hair color requirements: Hair must not be dyed in unnatural colors or styled in bizarre ways; only normal colors like black or brown are permitted. Hair must not cover facial features, otherwise, the photo must be retaken.
12
4
Share

What is the general tire pressure for a van?

The tire pressure for a van can be selected according to the manual, around 2.5mpa is suitable. Here is the relevant content introduction: 1. Pressure: If the pressure is too low, it will increase the deformation of the tire body, and cracks are prone to appear on the sidewall. At the same time, it will cause flexing movement, leading to excessive heat, promoting rubber aging, fatigue of the cord layer, and breakage of the cords. It will also increase the tire's contact area with the ground, accelerating shoulder wear. If the pressure is too high, the tire cords will be excessively stretched and deformed, reducing the elasticity of the tire body. This will increase the load on the car while driving, and if impacted, it may cause internal cracks and explosions. Additionally, excessive pressure will accelerate crown wear and reduce puncture resistance. 2. Tire pressure: The appropriate tire pressure depends on the load and the season. If carrying cargo, it is recommended to have 3.5bar for the front tires and 4.0bar for the rear tires. If not carrying cargo, around 2.1bar in summer and 2.5bar in winter is sufficient. 3. Over-inflation or under-inflation: The tire pressure should not be too high or too low. If the pressure is too low, the tire may exhibit wave-like deformation during high-speed driving, increasing the risk of a blowout. If the pressure is too high, it will reduce the contact area between the tire and the ground, leading to decreased vehicle handling and driving stability.
7
5
Share

What are the reasons for the weak starting of the starter motor?

The reasons for the weak starting of the starter motor are: 1. Insufficient battery charge or loose connections, dirty terminals, poor contact; 2. Starter motor bushings too tight or too loose; 3. Bent or deformed armature shaft scraping against the magnetic poles; 4. Dirty commutator or brushes, worn brushes, weakened spring tension; 5. Open circuit or partial open circuit in the field coils or armature coils; 6. Burnt contacts in the starter switch. Precautions for using the car motor are: 1. Regularly clean accumulated dirt and dust on the generator surface to maintain cleanliness and good ventilation; 2. Periodically check the tightness of all fasteners related to the generator and promptly tighten all screws; 3. If the generator fails to generate electricity, troubleshoot the issue immediately.
2
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.