···
Log in / Register

What procedures are required for scrapping a Beijing-licensed vehicle?

3 Answers
VanValentina
09/08/25 6:08am
Scrapping procedures involve the vehicle owner (individual or organization) submitting a scrapping application; the individual or organization must bring the scrapped motor vehicle's driving license (or a copy) and the ID card of the person delivering the vehicle to the municipal metal recycling company's vehicle delivery office to obtain the "Scrapped Vehicle Recycling Certificate"; the owner then uses this certificate, along with the vehicle registration and license plates, to complete the deregistration process at the municipal vehicle management office; finally, the owner must present the "Scrapped Vehicle Recycling Certificate" to the Transportation Bureau and the Road Transport Administration to cancel the road maintenance fee and transport management fee. Hazards of scrapped vehicles: When a motor vehicle reaches the end of its service life or becomes severely deteriorated, its operational flexibility, stability, braking performance, and other critical functions are significantly reduced, posing constant and widespread hazards that seriously threaten the safety of other vehicles and pedestrians. Issues with scrapped vehicles: Some vehicles that have reached the scrapping age are disguised through deceptive practices such as using fake license plates or repainting, making them indistinguishable from stolen or illegally obtained vehicles, thus confusing consumers.
Was this review help?
16
3
Share
StephenLee
09/20/25 4:41am
Just finished scrapping my old Beijing-licensed car, and the process was quite clear. Remember to first make an online appointment with a dismantling factory—make sure it's a qualified and legitimate company. Bring the three essential documents: ID card, vehicle license, and registration certificate, and don't forget to remove and bring the license plates. At the factory, staff will verify the vehicle’s status, and after filling out the 'Motor Vehicle Scrapping Application Form,' you can watch your beloved car get dismantled. The 'Recycling Certificate for Scrapped Vehicles' issued by the dismantling plant is the most important—you’ll need it to complete the deregistration at the DMV. Finally, confirm the successful deregistration on the Traffic Management 12123 App, and remember to apply for an indicator update, or it might affect your next lottery. The whole process takes about two weeks, so don’t wait until just before the insurance expires to start—it can get hectic.
Was this review help?
11
3
Share
Expand All
Espírito Santo
11/03/25 5:04am
The key to scrapping a Beijing-licensed vehicle is to follow two main steps. First, arrange for vehicle dismantling and recycling: make an appointment via WeChat with a dismantling facility, and bring your ID card, vehicle license, and vehicle registration certificate when delivering the car on-site. Next, the deregistration process is crucial: after obtaining the recycling certificate from the dismantling facility, visit the vehicle management office to complete the deregistration. A special reminder: the quota update must be processed through the Beijing Passenger Car Quota Regulation System. Missing this step could cause issues when purchasing a new car later. Currently, recycling facilities offer free towing services, so it's recommended to clear personal belongings from the car a week in advance and submit the duplicate vehicle license to the facility for archiving.
Was this review help?
11
5
Share
Expand All
More Forum Discussions

How to Check the National Emission Standard?

Here are five methods to check the national emission standard: 1. Check your vehicle's environmental protection label, which has clear markings on the back. 2. Visit the Motor Vehicle Environmental Protection Website for inquiries. Enter the website, click on the 'Motor Vehicle Environmental Protection Information Verification System' option, select the vehicle type and the passed emission standard, input your vehicle's model and engine type, and click 'Query' to view the emission standard of the vehicle in question. 3. Bring the motor vehicle registration certificate (original or copy) to the vehicle management office for inquiry. 4. If you purchased a new vehicle, you can check the vehicle's factory certificate. Note that the factory certificate is usually kept at the vehicle management office, so it's advisable to make a copy for backup when buying a new car. 5. You can roughly estimate based on the vehicle's registration year. Most vehicles registered after 2008 are National IV standard, those registered in 2007 could be National III or IV, vehicles registered before 2007 are mostly below National IV (i.e., National III or II), and vehicles registered before 2005 are mostly National II standard.
19
3
Share

What are the dimensions of the Lamando?

The dimensions of the Volkswagen Lamando are 4599mm in length, 1826mm in width, and 1425mm in height. Below are the relevant details about the Volkswagen Lamando: 1. Name Meaning: Lamando is derived from "Ling Feng Du Yue," meaning "command, manage, lead, and inspire"; 2. Target Audience: Positioned for young consumers with a purchasing power of 150,000-300,000 RMB; 3. Exterior Design: Features a diving front grille, LED daytime running lights, aggressive dual exhaust pipes, and sharp front fog lights; 4. Interior Design: Includes 20 ambient lights, a leather multifunction steering wheel, a T-shaped center console, and illuminated welcome pedal trims; 5. Powertrain Configuration: Offers two powertrain options: a 1.4TSI engine paired with a 7-speed DSG transmission and a 1.8TSI engine matched with a 6-speed DSG transmission, delivering a maximum power of 220 horsepower and a 0-100 km/h acceleration time of approximately 6.5 seconds.
2
2
Share

Where is the air conditioning control module of Baojun 730 located?

Baojun 730 air conditioning control module is located at the lower center position of the center console. Extended information: The following are precautions for using car air conditioning: 1. Be cautious about air conditioning modifications: It is not recommended to modify the car's air conditioning system, as the original air conditioning is matched with the car's engine. Random modifications may affect the vehicle's performance. 2. Avoid setting the temperature too low: Choosing an appropriate air conditioning temperature is the first step in air conditioning maintenance. Setting the temperature too low can affect physical health. 3. Control the air outlet direction: The principle for car air conditioning outlets is to point them upward when cooling and downward when heating. 4. Do not use it for too long: Prolonged use of the air conditioning can increase the condenser pressure excessively, causing wear and tear to the refrigeration system. 5. Use high airflow appropriately: The air conditioning system can accumulate a lot of dust during use. Regularly using high airflow can blow out the surface dust in the air ducts. The simplest method is the most effective.
8
2
Share

How to reset the oil maintenance reminder on the Lynk & Co 01?

Method to reset the oil maintenance reminder on the Lynk & Co 01: Press and hold the reset button for more than 5 seconds to activate the reset mode, then press and hold the reset button again for more than 1 second to complete the reset. The main components of engine oil are base oil and additives. Base oil is the primary component of lubricating oil, determining its fundamental properties; additives can compensate for and improve the deficiencies in base oil performance, endowing it with certain new characteristics, making them an important part of lubricating oil. Below is an introduction to engine oil: 1. Engine oil is the lubricating oil used by engines, composed of base oil and additives. As a type of machinery, engines have common requirements for lubricating oil similar to general machinery, such as requiring appropriate viscosity, certain anti-oxidation, anti-wear, anti-corrosion, and viscosity-temperature properties. 2. The density of engine oil is approximately 0.91×10³ (kg/m³), and it can lubricate and reduce friction, assist in cooling, seal and prevent leaks, prevent rust and corrosion, and provide shock absorption and buffering for the engine.
18
0
Share

How is the purchase tax calculated for the Binyue?

Vehicle purchase tax = purchase price ÷ (1 + 17%) * 10%. Taking the Binyue 200T manual shooter National VI as an example, the official price is 78,800 yuan, and the purchase tax is 6,735 yuan. The following is about the car purchase tax and the Binyue: 1. The car purchase tax refers to the tax to be paid when purchasing a car. The purchase tax amount is 10% of the car's selling price (excluding tax). The taxpayers of the vehicle purchase tax are units and individuals who purchase (including purchase, import, self-production, gift, award or other means of obtaining and self-use) taxable vehicles, and the tax rate is 10%. In addition to cars, motorcycles, electric vehicles, trailers, and agricultural transport vehicles are also subject to the vehicle purchase tax. 2. The Binyue is the first high-power intelligent SUV based on Geely's BMA modular production. The ICC intelligent navigation system can follow the vehicle in front, automatically brake and stop, follow turns, etc., as well as the vehicle keeping system, which can intelligently assist in keeping the vehicle within the lane. If you need to overtake, just turn on the left turn signal, and it will automatically accelerate without the need to move your foot.
20
3
Share

Is it necessary to go to a 4S dealership for car maintenance?

New cars must be serviced at a 4S dealership during the warranty period; after the warranty period expires, it is not mandatory to go to a 4S dealership, but it is essential to choose a reliable and trustworthy repair shop. Here are the detailed explanations: 1. New cars must be serviced at a 4S dealership because manufacturers provide a warranty period for new vehicles. If any quality issues arise during this period, they will be repaired for free. 2. If the vehicle is not serviced at a 4S dealership as required by the manufacturer, the warranty will become void. Additionally, the biggest advantages of servicing at a 4S dealership are professionalism, reliability, and comprehensive vehicle information records. The equipment is also more complete and professional, the quality of parts is guaranteed, and the maintenance technicians are specially trained, so you can rest assured about their technical skills. 3. After the warranty period expires, if you find 4S dealerships too expensive, you can choose to go to a repair shop or DIY. Repair shops generally do not have significant issues with workmanship, and if it is a reputable auto repair shop, the quality and reputation are also guaranteed. However, due to lower production costs in some aspects, the prices tend to be cheaper.
16
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.