···
Log in / Register

What procedures are required for motorcycle registration?

4 Answers
VonCarmen
07/30/25 2:17am
First, take the certificate of conformity to the traffic police team for stamping, and bring the invoice, ID card, and other attachments for purchasing the motorcycle to the State Taxation Bureau to pay the vehicle purchase tax. The following is an introduction to vehicle registration: 1. Description: When taxpayers file a tax return, they should truthfully fill in the "Vehicle Purchase Tax Return Form" and provide the original and photocopies of the following materials. 2. Conditions: Mainland residents should provide a mainland "Resident ID Card" (including residence and temporary residence certificates) or "Household Registration Book" or military (including armed police) identity proof. 3. Price proof: For vehicles purchased domestically, provide a unified invoice (invoice copy and tax return copy) or valid proof.
Was this review help?
6
5
Share
McChristian
08/15/25 8:22am
I just completed the motorcycle registration process, and overall it went smoothly but required some patience. The main procedures are divided into three steps: preparing documents, vehicle inspection, and going to the DMV for registration. For the documents, you need to bring the original and photocopy of your ID card, purchase invoice, vehicle certificate, insurance policy, and compulsory traffic insurance proof. Remember to pay the purchase tax in advance, or you’ll make a wasted trip. The inspection step is crucial—you must drive to a designated location to check if the lights, brakes, and emissions meet the standards. I wasted time the first time because I didn’t check the requirements clearly, so I recommend checking the official website or calling the hotline beforehand. The DMV has long queues, so going early improves efficiency. After submitting the documents and paying the fees, you’ll get your license plate. The whole process takes about two to three days, with costs ranging from 800 to 1,500 RMB. Don’t trust scalpers who claim to speed things up—stick to the official process for safety. Once registered, you can ride without fear of inspections and protect your bike from theft.
Was this review help?
3
0
Share
Expand All
MaddoxLee
10/21/25 5:26am
As someone who has long been involved with motorcycles, I believe the core of the registration process lies in the accuracy of materials and inspections. The required materials include proof of identity, purchase invoice, vehicle manufacturing certificate, compulsory insurance policy, and tax payment proof. During the vehicle inspection, ensure that emissions, brakes, and lighting systems meet standards, with some regions also requiring updated emission standard documents. Common issues include missing materials or mismatched invoice information, so it's advisable to make several copies as backups. Costs involve inspection fees of 50-100 yuan, registration fees of 100-300 yuan, plus insurance and taxes, with the total price varying by vehicle model. After completing the procedures, you'll receive license plates and a vehicle registration certificate, allowing legal road use and avoiding fines. I often remind owners that new vehicle registration must be completed within 15 days to avoid potential fines, and transfers require additional documents like the original owner's information and transfer agreement. Overall, don't find the process cumbersome—safety comes first.
Was this review help?
1
1
Share
Expand All
LeDaisy
12/04/25 5:53am
When I first started riding, I thought the registration process was quite simple. Just prepare your ID card, invoice, and vehicle certificate, get the vehicle inspected at the testing station, then submit the materials to the DMV to receive the license plate. I forgot to bring the insurance policy, so I had to make another trip—definitely check the list beforehand. The cost isn't high, around a few hundred yuan, and the whole process took two days. Now I feel much more at ease on the road. Registration protects your rights, making it easier to handle accidents. For beginners, it's better to get it done early to avoid hassle.
Was this review help?
9
3
Share
Expand All
More Forum Discussions

What's the difference between maintenance done outside and at a 4S shop?

Differences between 4S shop maintenance and external maintenance: 1. Different risks: 4S shop maintenance has low risk and is guaranteed; external maintenance has high risk and no guarantee. 2. Different efficiency: 4S shop maintenance is less efficient but uses original parts; external maintenance is more efficient but does not use original parts. Benefits of 4S shop maintenance: 1. 4S shops can provide original parts and materials. 2. 4S shops can offer the most professional and reliable repair technology, professional equipment and tools, and focus on brand reputation. 3. 4S shops have a complete service process and post-repair service tracking system to ensure every repair procedure strictly follows the brand's requirements. 4. 4S shops have formal and open complaint channels and supervision systems, fully ensuring customer satisfaction. 5. 4S shops take responsibility for any disputes after repairs to guarantee your satisfaction.
9
2
Share

What is the label for fully synthetic engine oil?

Fully synthetic engine oil does not have a specific label, but the bottle will directly indicate "fully synthetic" on its exterior. The functions of fully synthetic engine oil are: 1. Between the piston and cylinder of the engine, as well as between the main shaft and bearings, there is rapid relative sliding. The oil forms a sufficiently thick oil film between the two sliding surfaces, separating the surfaces of the relatively sliding parts to reduce wear. 2. It carries heat back to the oil tank and dissipates it into the air, helping the radiator to cool the engine. 3. It cycles carbon deposits, sludge, and worn metal particles from engine parts back to the oil tank, using the flow of the lubricating oil to wash away contaminants generated on the working surfaces of the parts. 4. It provides shock absorption and cushioning. When the pressure at the engine cylinder port rises sharply, suddenly increasing the load on the piston, piston chips, connecting rod, and crankshaft bearings, the load is transmitted through the bearings' lubrication to cushion the impact load.
17
0
Share

What to Do If You Accidentally Fill a Car Requiring 95 Octane with 92 Octane?

If a car that requires 95 octane gasoline is accidentally filled with 92 octane, do not start the vehicle. Immediately contact a 4S shop or a maintenance technician to drain and clean the fuel tank and fuel lines, followed by a comprehensive engine inspection. The consequences of using 92 octane in a car designed for 95 octane include: 1. Reduced engine power. 2. Lower idle speed. 3. Increased fuel consumption. 4. Engine stalling or failure to start. Introduction to gasoline: 1. Gasoline is refined from various petroleum-derived components such as straight-run gasoline, catalytic cracking gasoline, and catalytic reforming gasoline, blended with high-octane components. 2. Gasoline is primarily used as fuel for spark-ignition internal combustion engines in automobiles.
15
0
Share

What Type of Engine Oil is Best for the First Car Maintenance?

Every vehicle comes with a manufacturer-recommended standard original engine oil. If not specifically specified, using the original engine oil is sufficient for both the first maintenance and subsequent regular services. Types of engine oil: Mineral Oil: Mineral oil is directly refined from crude oil without the addition of other additives. It is suitable for low-displacement, non-turbocharged vehicles or those with infrequent usage, typically around 5,000 kilometers in half a year. If you don't drive often, mineral oil offers the best economic value. Semi-Synthetic Oil: Semi-synthetic oil is a blended product made by mixing mineral oil and full synthetic oil through a compounding process. It offers the best cost-performance ratio and is a great choice for drivers who frequently use their cars. Its oil change interval is around 7,500 kilometers, making it suitable for most vehicle models. Full Synthetic Oil: Full synthetic oil is more expensive compared to the previous two types but offers superior performance. Whether in terms of stability, lubrication, low-temperature performance, or cleanliness, it far outperforms mineral oil and semi-synthetic oil. Its replacement interval exceeds 10,000 kilometers, and many car owners experience noticeable performance improvements after switching to full synthetic oil.
9
5
Share

Why does the screen go black when connecting Apple CarPlay to the car?

The main reasons for the black screen when connecting Apple CarPlay to the car are: In-vehicle computer crash: As modern cars have numerous electronic components, especially with the continuous updates of car connectivity systems, many vehicles' multimedia systems have become increasingly complex, leading to more frequent occurrences of dashboard screen malfunctions. You can try turning off and restarting the vehicle and its onboard computer to see if the screen display recovers. If the problem persists after repeated attempts, schedule a visit to a 4S shop for module inspection, software refresh, or repair. Connector detachment: Since many wiring connections use direct plug-in connectors, they may become detached or loose due to bumpy road conditions or original installation quality issues, resulting in dashboard screen failure. This can only be resolved by visiting a 4S shop or repair shop to disassemble the rear of the screen and securely reconnect the connectors.
10
1
Share

Why does the steering wheel shake when the car reaches 100 km/h?

In most cases, steering wheel vibration at 100 km/h is caused by wheel dynamic balance issues. The solution is to add counterweights to the wheels while they are in motion to correct the balance at various edge points - this process is called dynamic balancing. Other possible causes include shock absorber failure, frame deformation, or excessive clearance between the driving and driven gears of the final drive. It is recommended that owners regularly perform dynamic balance checks on their wheels. The dynamic balancing procedure is as follows: 1. Remove the logo in the center of the hub, install the dynamic balancer for measurement, and input the data. 2. Measure the rim width and input the data. 3. According to the computer-calculated data, add appropriate dynamic balance weights to both the inner and outer sides of the rim. When the re-test meets the standard, the process is complete.
18
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.