What procedures are required for motorcycle insurance transfer?

1 Answers
SanElias
07/30/25 5:16am
The documents required for vehicle insurance transfer include: vehicle registration certificate, motor vehicle registration certificate, motor vehicle registration supplementary form (obtained from the local vehicle management office with ID card and vehicle registration certificate), vehicle purchase tax certificate, ID cards of both buyer and seller, household register (if it is a non-local household register, a temporary residence permit is required, and the buyer's temporary residence permit must be valid for at least one year). When processing motor vehicle transfer, the compulsory traffic insurance certificate is only required if the motor vehicle has exceeded the inspection validity period. If it has not exceeded the inspection validity period, the compulsory traffic insurance certificate is not required. Therefore, as long as the motorcycle has not exceeded the inspection validity period, it can be transferred even without compulsory traffic insurance. However, if it has exceeded the inspection validity period, transfer cannot be completed without compulsory traffic insurance. Precautions for motorcycle transfer: Consumers should promptly complete the transfer and name change procedures for relevant vehicle documents and insurance after purchasing a used motorcycle. Consumers should have a detailed understanding of the documents of the used motorcycle they are purchasing to avoid buying a used motorcycle that cannot be transferred. Consumers should be wary of tampering with the motorcycle odometer.
Was this review help?
18
5
Share
More Forum Discussions

How to Clear the Tire Pressure Warning on a Golf Car?

Method to clear the tire pressure warning on a Golf car: The tire pressure reset button for the Golf is located on the gear lever panel. Press and hold the SET button on the gear lever for 3 to 5 seconds until you hear a beep, indicating the tire pressure reset is complete. The tire pressure warning light on the dashboard will then disappear. The tire pressure reset button for the Golf is located on the tire pressure monitoring indicator button at the lower part of the central console. There are two types of tire monitoring indicators, labeled A and B. The Golf is a compact car under FAW-Volkswagen. Taking the 2018 Golf 1.6L Manual Fashion model as an example, its dimensions are 4259mm in length, 1799mm in width, and 1452mm in height, with a wheelbase of 2637mm. The car features a 5-door, 5-seat hatchback structure, a fuel tank capacity of 50 liters, and a curb weight of 1200kg.
5
5
Share

What is the real urban fuel consumption of the Lynk & Co 03?

Lynk & Co 03 actual measured comprehensive fuel consumption: driving distance of 605 kilometers, fuel refill volume of 47.98 liters, average fuel consumption of 7.93L/100km. Urban fuel consumption will be slightly higher. Here is a brief introduction about the Lynk & Co 03: 1. Introduction: The Lynk & Co 03 is the first sedan product of the Lynk & Co brand and the first sedan built on the CMA basic modular architecture. The Lynk & Co 03 2.0TD adds driver's seat memory and driver's seat ventilation based on the configuration of the 1.5TD model. 2. Configuration: Three-screen interaction, cloud connectivity, remote APP control, 17 intelligent driving assistance technologies, active and passive safety technologies, etc.
18
4
Share

Is the BMW 7 Series produced domestically?

There are no domestically produced models of the BMW 7 Series. Overview of the BMW 7 Series: The BMW 7 Series is BMW's top-tier luxury sedan series, featuring a 4-door sedan body style and a front-engine, rear-wheel-drive layout. The BMW 7 Series is the flagship model of BMW, exclusively produced in Germany. It replaced the previous-generation BMW New Six in 1977. Additional Information: Dimensions: 5212mm × 1902mm × 1478mm. Fuel tank capacity: 82L. Standard seating capacity: 5. Top speed: 245km/h. Seat material: genuine leather. Acceleration time: 4.6-8.3 seconds (0-100km/h). Braking system: ventilated disc.
15
5
Share

What does the dashboard symbol of a person holding a ball mean?

The dashboard symbol of a person holding a ball represents the airbag indicator light. The function and precautions of the airbag indicator light are as follows. Function of the airbag indicator light: It is primarily designed to prevent injuries caused by collisions between passengers and interior components during a car crash. It usually serves as a supplementary safety device to seat belts, working in conjunction with them. The airbag is a passive safety system that is only activated when the vehicle experiences a severe impact. Precautions for airbags: Avoid placing objects in front of, above, or near the airbag. Since the airbag can deploy in emergency situations, do not place items in these areas to prevent them from being ejected by the airbag upon deployment, which could harm passengers.
17
0
Share

How often should the brake fluid be replaced in a Hyundai Elantra?

It is recommended that car owners replace the brake fluid every two years or 40,000 kilometers. Below are the specific details: Introduction to Brake Fluid: Generally, it is advised to replace the brake fluid every two years, but this interval can vary depending on usage conditions. The replacement cycle for brake fluid differs among various car brands as per official maintenance guidelines, which depend on the brake fluid brand and the vehicle model. Brake fluid has certain corrosive properties and strong water absorption. Many service stations now have specialized tools to measure the water content in brake fluid, allowing for a test to determine if replacement is necessary. It is essential to replace the brake fluid regularly when it reaches the maintenance interval, preferably following the manufacturer's recommended maintenance cycle. Function of Brake Fluid: Brake fluid, also known as automotive brake fluid, was initially used in mechanical drum brakes in early cars. With the advancement of hydraulic technology, safe and reliable hydraulic braking systems have become widely used in vehicles. Automotive brake fluid is the liquid used in the hydraulic braking system of a car. When the driver presses the brake pedal, the force applied is transmitted by the piston in the master cylinder through the brake fluid to the wheel cylinders, causing the brake pads to expand and stop the vehicle. When the brake is released, the return springs pull the brake pads back to their original position. Throughout this process, the brake fluid acts as a force transmitter. In the car's braking system, the brake fluid serves as a medium for transmitting force. When the driver presses the brake pedal, the force is amplified by the vacuum booster, pushing the master cylinder, which in turn pushes the brake fluid. This force is then transmitted through the brake fluid to the wheel cylinders at each of the four wheels. The wheel cylinders push the brake pads, which then press against the brake discs to generate braking force.
17
1
Share

What is the maximum wading depth of the T-Roc?

According to official information, the maximum wading depth of the T-Roc is 50 cm. Common tire specifications include 215/50R18 and 215/55R17, with body lengths of 4318mm and 4326mm, and a vehicle weight ranging from 1385kg to 1510kg. The body structure is a 5-door, 5-seat SUV. Maximum wading depth refers to the deepest water a vehicle can safely pass through. Generally, the maximum wading depth for sedans does not exceed 30 cm, while SUVs can handle slightly deeper water, though it's still best not to exceed 50 cm. Among common models, the GAC Trumpchi GS8 has a maximum wading depth of 30 cm, the Audi A4 32 cm, the Volkswagen Sagitar 30 cm, the Land Rover Range Rover 90 cm, the Jeep Compass 48 cm, and the Toyota Highlander 45 cm. SUVs clearly outperform sedans in terms of wading depth. Generally, when driving through water, vehicle owners should take different measures depending on the water depth and the vehicle's characteristics, as outlined below: If the water reaches the exhaust pipe height, it is relatively safe. Even if water enters the exhaust pipe, the pressure inside is sufficient to expel it. As long as the engine is not turned off in the water, water will not flow back into the vehicle. If the water reaches the door frame height, it becomes more dangerous. The vehicle's circuits, electronic components, and sensors are mostly located at the bottom, increasing the risk of short circuits and damage to critical electrical parts, which may prevent the car from starting. If the water reaches the air intake height, it is extremely hazardous. Driving directly into such conditions can cause the engine to stall immediately, leading to permanent damage or rendering the engine unusable.
18
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.