What procedures are required for changing the engine number?

2 Answers
VanClayton
07/28/25 9:58pm
To change the engine number, the vehicle owner must apply for a change of registration with the vehicle management office within ten days after the change. They need to fill out the "Motor Vehicle Change Registration Application Form," submit the required legal documents and proofs, and have the vehicle inspected. Relevant information about car engines is as follows: 1. Introduction: The car engine is the device that provides power to the vehicle, acting as the heart of the car. It determines the vehicle's power, fuel efficiency, stability, and environmental performance. Common gasoline and diesel engines are both types of reciprocating piston internal combustion engines. 2. Classification: Based on the power source, car engines can be categorized into diesel engines, gasoline engines, electric vehicle motors, and hybrid engines, among others.
Was this review help?
16
0
Share
VanRonan
08/12/25 2:32am
As an experienced mechanic, I often assist car owners with the procedures for changing engine numbers. This is usually necessary when an engine is scrapped or a new one is installed. First, you need to prepare the vehicle registration certificate, the original ID of the owner, and the vehicle license plates. If the engine is being replaced due to damage, you must also bring the scrapping certificate of the old engine. Then, visit the local vehicle management office to fill out an application form and submit the required documents. You may also need a certification from the police to prove the engine's legal origin and avoid suspicion of illegal modifications. The entire process costs approximately 200 to 500 RMB, depending on the region. Once approved, the vehicle management office will update the registration information and issue new license plates or labels. This process usually takes 2-3 working days, and I recommend making an appointment in advance to avoid long queues. Don’t forget to check if the new number matches the vehicle model to prevent inspection failures. If the procedures are not completed properly, driving on the road may result in fines or towing, which can be troublesome. In short, safety and compliance are top priorities, and hiring a reputable shop to handle the process for you can save a lot of hassle.
Was this review help?
18
2
Share
Expand All
More Forum Discussions

Where is the engine of the Geely Binyue produced?

Geely Binyue's engine is produced in China. The Geely Binyue is equipped with a 1.5T engine, delivering a maximum horsepower of 177 HP, power of 130 kW, and a peak torque of 255 N·m, with a 0-100 km/h acceleration time of under 7.9 seconds. The Geely Binyue is a compact SUV with body dimensions of 4330 mm in length, 1800 mm in width, and 1609 mm in height, and a wheelbase of 2600 mm. The vehicle features a turbocharged intake form, front-wheel drive, a front suspension type of MacPherson independent suspension, a rear suspension type of torsion beam non-independent suspension, and a unibody structure.
17
2
Share

What is the real urban fuel consumption of the Nissan Sylphy automatic transmission?

The Nissan Sylphy automatic transmission has 10 models currently on sale. Among them, the 2022 e-POWER Ultra, e-POWER Pro, Super Connect PLUS, and Super Drive MAX models, equipped with a 72-horsepower engine, have an NEDC fuel consumption of 3.9L per 100km. The 2022 Classic 1.6XL CVT Luxury Edition and 1.6XE CVT Comfort Edition models, equipped with a 122-horsepower engine, have an NEDC fuel consumption of 5.2L per 100km. The 2022 1.6L XL CVT Enjoy Edition and Smart Edition models, equipped with a 135-horsepower engine, have an NEDC fuel consumption of 4.9L per 100km. The 1.6XE CVT Comfort Plus Edition, equipped with a 135-horsepower engine, has an NEDC fuel consumption of 5.3L per 100km. The 1.6L TOP CVT Premium Edition, equipped with a 135-horsepower engine, has an NEDC fuel consumption of 5.2L per 100km. The fuel tank capacity varies among different models of the Nissan Sylphy automatic transmission. The distance that can be covered on a full tank of fuel is as follows: Models equipped with a 72-horsepower engine and an NEDC fuel consumption of 3.9L per 100km have a fuel tank capacity of 41L, allowing a distance of 41/3.9*100=1051km on a full tank. Models equipped with a 122-horsepower engine and an NEDC fuel consumption of 5.2L per 100km have a fuel tank capacity of 50L, allowing a distance of 50/5.2*100=962km on a full tank. Models equipped with a 135-horsepower engine and an NEDC fuel consumption of 4.9L per 100km have a fuel tank capacity of 47L, allowing a distance of 47/4.9*100=959km on a full tank. Models equipped with a 135-horsepower engine and an NEDC fuel consumption of 5.3L per 100km have a fuel tank capacity of 47L, allowing a distance of 47/5.3*100=887km on a full tank. Models equipped with a 135-horsepower engine and an NEDC fuel consumption of 5.2L per 100km have a fuel tank capacity of 47L, allowing a distance of 47/5.2*100=904km on a full tank. The level of a car's fuel consumption is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that can increase a car's fuel consumption are as follows: Driving habits: Aggressive driving will increase fuel consumption. The car itself: Heavier cars consume more fuel because greater weight requires more driving torque. Road conditions: Driving on rough roads increases resistance and fuel consumption.
7
5
Share

What transmission does the Geely Boyue use?

Geely Boyue uses a 6-speed automatic manual transmission and a 7-speed dual-clutch transmission. The Geely Boyue is a compact SUV launched by Geely, with body dimensions of 4519mm in length, 1831mm in width, 1694mm in height, and a wheelbase of 2670mm. The Geely Boyue is equipped with a 7-inch full LCD 3D dynamic combination instrument panel, a NAPPA luxury leather multifunction steering wheel, an EPB electronic parking brake system, and an AUTOHOLD automatic parking system. The front face of the vehicle continues the Geely family-style water ripple grille, with LED headlights, a floating roof, and a bright silver integrated roof rack. At the rear, the Geely Boyue features a widened and raised rear bumper, with C-shaped LED taillights and dual exhaust pipes creating a striking visual effect.
5
3
Share

What is the method for adjusting the height of the Lexus ES low beam headlights?

Lexus ES low beam headlight height adjustment method is: rotate the height adjustment knob located below the left side of the steering wheel. The Lexus ES is a mid-to-large-sized sedan from Lexus. Taking the Lexus ES250 as an example: the body dimensions are 4900mm in length, 1820mm in width, 1450mm in height, with a wheelbase of 2820mm, and the drive system is front-wheel drive. The Lexus ES250 is equipped with a 2.5-liter inline 4-cylinder DOHC 16-valve engine with VVTi and a 6-speed intelligent electronic control automatic transmission system. Its interior space is spacious and ample, with wide seats that provide a comfortable and proper seating experience; the overall interior design style is business luxury, with rich configurations.
11
3
Share

Why is the key light flashing on the Mazda dashboard?

Mazda dashboard key flashing is caused by the car not detecting the key due to low battery. Mazda is a Japanese automobile manufacturer that has successively launched models such as the Mazda6, Mazda3, Mazda2, Mazda8, RX8, Roadstar, and CX7. Taking the Mazda6 as an example, its body dimensions are 4670mm in length, 1780mm in width, and 1435mm in height, with a wheelbase of 2675mm. It is equipped with a card-type smart key, an 8-way power-adjustable driver's seat with 3 memory settings, xenon headlights, automatic headlight switch, headlight washer, and rain-sensing wipers.
11
4
Share

Reasons Why the Odyssey Remote Key Cannot Lock the Car Remotely

The reasons why the Odyssey remote key cannot lock the car remotely are: the remote battery is dead or the remote key is affected by magnetic interference. The Odyssey is an MPV model launched by Honda Motor Company. Taking the Odyssey 2021 2.0L Comfort Edition as an example, its intake form is naturally aspirated, with a maximum power of 107 kW and a maximum torque of 175 Nm. The Odyssey is equipped with an ECVT continuously variable transmission and a 2.0L 146 horsepower L4 engine. The engine model is LFB11, featuring Honda's proprietary i-VTEC technology, with cylinder head and block made of aluminum alloy.
3
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.