···
Log in / Register

What procedures are required for changing the color of a car?

4 Answers
JadeAnn
07/29/25 5:36pm

The procedures required for changing the color of a car are: 1. Go to the vehicle inspection station to inspect the vehicle and pre-record the information; 2. After queuing up to get a number in the business hall, submit the required documents at the acceptance window: the application form for vehicle modification registration, the identity proof and copy of the vehicle owner, the vehicle registration certificate, the driving license, and a set of chassis number rubbings; 3. Pay the relevant fees at the payment window; 4. Collect the documents at the license and certificate window. Precautions for changing the color of a car include: 1. The body color cannot be the same or similar to that of special vehicles; 2. The area covered by color-changing film cannot exceed one-third of the body area; 3. The body color cannot exceed three types. Before changing the color, you can consult the vehicle inspection station to confirm whether the selected color is allowed for modification. After receiving a positive response, you can proceed with the color change and then schedule an appointment to complete the modification registration procedures.

Was this review help?
6
2
Share
SanNova
08/14/25 8:50am

I just had my car repainted a new color last month, and the whole process was much simpler than expected. Before the color change, you need to pick a suitable color that isn’t too flashy or affects driving safety. After the repaint, you must register the change at the vehicle management office within ten days. Bring your original ID card, vehicle registration certificate, and the motor vehicle registration certificate, and take two clear photos of the front and back of the car in advance. At the vehicle management office, they’ll arrange a quick inspection to verify the color consistency and ensure there are no illegal modifications. Then, pay a small fee, usually around 30 to 50 yuan, and you can get the updated registration certificate on the spot. The entire process takes only half a day. It’s recommended to go to a professional repainting shop for help—they handle this often, making it much easier. Don’t forget to notify your insurance company afterward to update the records and avoid claim disputes. Consider it a small investment for peace of mind on the road.

Was this review help?
14
1
Share
Expand All
DelCassidy
10/13/25 7:54am

As someone who frequently drives a family car with kids, I pay close attention to compliance and cost-saving when changing the car color. After the color change, don't rush to hit the road—immediately take the required materials to the DMV: your ID card, vehicle license, and registration certificate are all essential, along with two color photos of the vehicle. The DMV will conduct an inspection to confirm the changes, and if everything is in order, you'll spend a few dozen dollars to get a new certificate. The entire process should cost no more than a couple hundred yuan, and if efficient, it can be completed in one to two hours. The key is to ensure the color change doesn't compromise safety—for example, avoid overly reflective colors that might be mistaken for a police car. Remember to notify your insurance company to update the vehicle information; otherwise, it might affect claims in case of an accident. Once everything is properly handled, your family will feel more at ease riding in the car.

Was this review help?
7
2
Share
Expand All
SanTanner
11/27/25 2:05am

Changing your car's color can really boost your mood, but don't skip the paperwork. After the color change, immediately visit the DMV for registration. Bring your ID card, vehicle license, registration certificate, plus two new photos of the car. The inspection is quick, with a fee of just a few dozen yuan. Once you get the new certificate, you can hit the road without worries. Remember to handle this within ten days, or you might face a fine of over a hundred yuan if caught. Choose a cool color, but make sure it complies with regulations—avoid deep black or all-white, or you'll fail the annual inspection. This small task takes just half a day to sort out, and driving legally feels much better.

Was this review help?
18
2
Share
Expand All
More Forum Discussions

Where is the switch for the Nissan Qashqai's fog lights?

The fog light switch for the Nissan Qashqai is located on the lighting control assembly to the left of the steering wheel. You can turn the fog lights on or off by rotating the knob. Below is a classification of automotive lights: 1. Headlights - Combined headlights are located at the front of the vehicle and primarily serve illumination and signaling purposes. The light emitted by headlights illuminates the road ahead, enabling safe nighttime driving. 2. Taillights - Combined taillights are positioned at the rear of the vehicle, mainly providing illumination and signaling functions. 3. Turn signals - These lights indicate left or right turns to other road users. Regulations require them to be amber in color. 4. License plate lights - These primarily illuminate the license plate, allowing people to identify the vehicle's registration number at night.
9
3
Share

What Causes Engine Shaking When Braking at Idle Speed?

The reasons for engine shaking when braking at idle speed are: the idle switch not closing, a faulty idle control valve, and intake manifold air leaks. Idle Switch Not Closing: When the idle contact opens, the ECU determines that the engine is under partial load. At this time, the ECU calculates the fuel injection amount and timing based on signals from the air flow sensor, crankshaft position, and engine speed. However, the engine is actually operating at idle, where the air intake is lower, resulting in an overly rich air-fuel mixture and an increase in engine speed. When the ECU receives feedback from the oxygen sensor indicating an overly rich mixture, it reduces the fuel injection amount and increases the opening of the idle control valve, leading to an overly lean mixture and a drop in engine speed. Conversely, when the ECU receives feedback indicating an overly lean mixture, it increases the fuel injection amount and decreases the idle control valve opening, causing the mixture to become overly rich again and the speed to rise. This cycle repeats, causing unstable engine idle. The solution is to adjust or replace the throttle position sensor. Faulty Idle Control Valve: The normal idle speed of an electronically fuel-injected engine is maintained by the idle control valve. The ECU processes signals such as engine speed, temperature, throttle switch, and air conditioning switch to adjust the idle control valve, either by opening the intake bypass passage or directly increasing the throttle opening to boost air intake and raise the idle speed. When the idle speed exceeds the set value, the ECU commands the idle control valve to reduce the intake bypass passage, decreasing the air intake and lowering the engine speed. Issues like sticking due to oil residue or carbon buildup, or incomplete throttle closure, can prevent the ECU from correctly regulating the idle speed, leading to instability. The solution is to clean or replace the idle control valve and perform a basic idle speed setting using a dedicated diagnostic tool. Intake Manifold Air Leaks: According to the engine idle control principle, under normal conditions, the opening of the idle control valve and the air intake strictly follow a specific functional relationship—that is, as the idle control valve opening increases, the air intake increases accordingly. An air leak in the intake manifold disrupts this relationship, making it impossible for the air flow sensor to measure the actual air intake accurately. This results in the ECU inaccurately controlling the air intake, causing unstable engine idle. The solution is to locate the leak, reseal it, or replace the affected components.
10
5
Share

Where is the USB port in the Magotan?

The USB port in the Magotan is located inside the storage compartment of the front center armrest. More relevant information is as follows: 1. The function of the car USB port is not only to charge devices like mobile phones via a car adapter or cigarette lighter but also to transmit audio data. Therefore, the interface current of the Magotan is only 5V/0.5A. 2. Since the voltage provided by the car is relatively low, the car charger only requires an overload protection circuit internally. A fuse is designed at the front end of the car charger socket. When the current exceeds the capacity of the overload protection circuit, the fuse will immediately blow to provide protection.
6
4
Share

Why Does a Car's Steering Wheel Pull to One Side?

The reasons for a car's steering wheel pulling to one side include the following: 1. Uneven tire pressure on both sides: The higher the tire pressure, the smaller the contact area with the ground, resulting in less rolling resistance. The vehicle will tend to pull toward the side with relatively lower tire pressure. 2. Uneven tread wear on both sides: The tire surface has a layer of rubber tread with a certain thickness. As the vehicle is used, the tread thickness gradually decreases. A tire with more tread wear effectively has a smaller diameter, causing the vehicle to pull toward the side with more tread wear. 3. Poor brake caliper piston retraction on one side: If the brake piston on one wheel does not retract properly, it will increase the rolling resistance on that side, causing the vehicle to pull toward the side with higher resistance. 4. Incorrect wheel alignment: If the camber angles of the wheels on both sides are inconsistent, the vehicle will tend to pull toward the side with a larger outward tilt angle.
18
4
Share

What does Super Select 4WD mean?

Super Select 4WD is an electronically assisted SS4-II system, a patented technology of Mitsubishi. Below is more information about Super Select 4WD: 1. Mitsubishi's Super Select 4WD system has a history of many years. Since its application in the second-generation Pajero models (V33, etc.) in the early 1990s, it has been successively equipped in the third-generation (V73, V77, etc.) and fourth-generation (V93, V87, V97, etc.) models. The Super Select 4WD has evolved from the first-generation purely mechanical SS4 system (second-generation Pajero) to the current electronically assisted SS4-II system (third and fourth-generation Pajero). 2. The advantage of the Super Select 4WD system is that it allows switching between 2H and 4H gears at speeds below 100 km/h. When in 4H position, it functions like a full-time 4WD vehicle, providing better traction and driving force. In 2H position, pure rear-wheel drive improves the vehicle's fuel economy to some extent.
15
5
Share

What are the functions of the Mazda6 Atenza trunk?

The functions of a car trunk are as follows: 1. Complete tool kit: The trunk contains a spare tire, jack, headlight tools, warning triangle, first aid kit, etc. Generally, these are standard equipment in cars, but many models may not have them all. In fact, the first aid kit and warning triangle should be included, as they are crucial for driving safety and emergency assistance. 2. Luggage storage net: When driving, you may encounter the problem of small, fragile items that are difficult to arrange neatly. Even if arranged well, they may still get disorganized or damaged during the ride. With a luggage storage net in the trunk, these concerns and unnecessary losses can be avoided. 3. Luggage compartment partition: Most hatchbacks, SUVs, and some MPV models have a partition in the trunk, which is an original factory-installed accessory. The partition helps with visibility when reversing, even without a rearview camera, and prevents luggage from rushing into the cabin during sudden braking, protecting passengers from injury.
14
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.