···
Log in / Register

What procedures are required for changing motorcycle license plates?

4 Answers
BradleyAnn
07/30/25 12:20am

To change the license plate number, apply to the traffic management department to cancel the original license plate number. Then, the traffic management department will review the status of the vehicle registration certificate and any violations associated with the license plate (all violations must be resolved, such as fines being paid). If there are no issues, the traffic management department will approve the plate change. Publish a license plate cancellation announcement in local print media or submit it to the traffic management department for a cancellation notice. After 30 days, the vehicle owner must bring their ID card, original vehicle purchase invoice, and other required documents to the local traffic management department to complete the new registration process and pay the plate change fee. Below is the relevant introduction: Article 52: After completing the transfer or cancellation of a motor vehicle's registration, the original owner may apply to the vehicle management office to use the original license plate number for a newly purchased motor vehicle's registration. The application to use the original license plate number must meet the following conditions: the application must be submitted within six months after the transfer or cancellation of registration; the original owner must have owned the vehicle for more than three years; and all traffic violations and accidents involving the original vehicle must be resolved.

Was this review help?
20
3
Share
CollinLynn
08/16/25 4:45am

I just changed my motorcycle license plate, and the whole process wasn't too difficult. Bring key documents like the original ID card and its copy, the vehicle registration certificate, and the old license plate. Make sure your vehicle has passed the annual inspection, or the trip would be wasted. Fill out an application form with your personal information and the reason for the plate change, such as damage to the old plate. The fee is usually around 50-60 yuan, so prepare cash or mobile payment. The DMV staff will inspect the vehicle's condition, take a few photos to confirm the handover of the old and new plates, and install the newly made plate securely. Remember to surrender the old plate and not keep it privately to avoid any violations. After completing the process, it's advisable to update your insurance information by reporting the new license plate number to your insurer promptly to prevent any impact on claims. The whole process can be done in half an hour if it's quick, but be patient if there's a long queue—try going early on a weekday next time for fewer people.

Was this review help?
15
3
Share
Expand All
StMorgan
10/19/25 7:26am

When handling license plate replacement, I pay the most attention to details. Having complete documents is key to a smooth process. Prepare copies of both sides of your ID card, the original vehicle registration certificate, and the original license plates—none of these should be missing. The plate replacement application form can be obtained on-site; fill it out truthfully with your name and address to avoid errors. Fees vary by region, ranging from tens to hundreds of yuan, so bring enough cash to avoid delays. Clean your car beforehand, as they may take photos during the vehicle inspection for records—don’t overlook this. During the process, check the new plate for any printing errors before installation, ensure it’s securely fastened to prevent loosening, and return the old plates for destruction—keeping them privately can cause trouble. Choose to go in the morning for efficiency; the entire process usually completes within half an hour. Afterward, remember to update other records, such as your driver’s license information, to keep all records synchronized.

Was this review help?
8
3
Share
Expand All
HannahLynn
12/02/25 8:05am

Changing a motorcycle license plate for the first time may seem complicated, but it's actually simple. Just go to the vehicle management office with your ID card, vehicle license, and old license plate. Fill out a form with personal information such as your name, address, license plate number, and the reason for the change (e.g., old plate worn out). Pay a small fee of a few dozen yuan—prepare cash or use mobile payment. After a quick vehicle inspection by the staff, you'll receive a new plate to install yourself and return the old one. Arrive early to avoid peak hours, and the process should take about half an hour smoothly. No need to stress—just follow the steps, and you're done.

Was this review help?
20
1
Share
Expand All
More Forum Discussions

Does the handbrake stop the rear wheels or the front wheels?

The handbrake stops the rear wheels, while the foot brake stops both the front and rear wheels. The function of the handbrake is to provide braking when parking on flat or inclined surfaces, preventing the vehicle from sliding automatically when unattended and avoiding traffic accidents. The correct method to apply the handbrake is: 1. Press the handbrake button before pulling it; 2. Apply gentle force when pulling the handbrake; 3. Pull the handbrake up to about 70% of its full range, as pulling it all the way to the top will shorten the lifespan of the handbrake cable. The dangers of forgetting to engage the handbrake while driving include: 1. The brake pump cannot provide sufficient braking force, causing the engine to stall; 2. Accelerated wear of the brake discs and hardening of the brake pads due to friction heat; 3. Stretching of the handbrake cable; 4. Leakage of brake cylinder oil, leading to brake failure.
1
0
Share

What is the tutorial for replacing a bulb on the Buick Excelle?

The tutorial for replacing a bulb on the Buick Excelle is: 1. Open the engine hood, and you can see the lamp cover near the lamp base inside the engine compartment; 2. Rotate the lamp cover counterclockwise and remove it; 3. Rotate the lamp base counterclockwise to detach it, replace with a new bulb, insert it into the lamp base, and rotate clockwise to secure; 4. Rotate the lamp bracket clockwise until it cannot be turned further, then install the lamp cover. Taking the 2019 Buick Excelle as an example, it belongs to the compact car category, with body dimensions of: length 4609mm, width 1798mm, height 1486mm, wheelbase 2640mm, fuel tank capacity 44l, and trunk capacity 400l. The 2019 Buick Excelle is equipped with a 1.0t turbocharged engine, with a maximum horsepower of 125ps, maximum power of 92kw, maximum torque of 170nm, paired with a 6-speed manual transmission.
5
5
Share

What does EPC mean when it appears on the car?

When the EPC light is displayed on the car's dashboard, it indicates a fault in the vehicle's electronic stability system. If the EPC light stays on or flashes after the vehicle starts or during driving, it signifies a malfunction that requires immediate contact with a repair shop for diagnosis and reading of specific fault codes. Possible reasons for the EPC light to illuminate include: The car's throttle is dirty and needs cleaning. A fault in the brake system, in which case the brake light may also not work. Issues with fuel quality, which can trigger the EPC fault light. EPC (Electronic Power Control) stands for Engine Electronic Power Control System. When a sensor malfunctions or detects abnormal conditions, the control system takes appropriate measures based on predefined programs. Detailed explanations for other scenarios causing the EPC light to illuminate: Fault in the engine intake system: If the engine intake is obstructed or insufficient, the EPC light will activate. Throttle fault: Carbon buildup is a common issue with the throttle, and dirt accumulation can also affect airflow, triggering the indicator light. Fuel system fault: Examples include substandard fuel, fuel degradation, or poor fuel atomization. Engine fault: Insufficient engine pressure or issues with components like the intake valve can also prompt the EPC light. ECU control unit fault: This may involve interference with the car computer's signals or false alerts from the computer. Brake light fault: Situations like non-functional brake lights, faulty brake switches, or brake wiring issues. Solutions for when the car's EPC indicator light comes on: Troubleshoot intake system issues, use the correct fuel grade, clean the throttle, etc. Remove carbon deposits from relevant parts. Re-flash ECU-related data. If the EPC light comes on, the owner can first try turning off the engine and restarting it to see if the EPC light remains off. If it stays off, there may be no issue, possibly just a temporary glitch. If the EPC light stays on or frequently illuminates, drive to the nearest repair point for professional diagnosis and timely resolution of potential safety hazards. EPC stands for Electronic Power Control, commonly referred to as the engine electronic stability system. The EPC system mainly includes controllers and sensors related to the powertrain. When sensor data is abnormal, the EPC system takes predefined actions on the powertrain. Common EPC indicator lights are usually two colors: yellow and red. A yellow EPC fault light means the car can still be driven but should proceed slowly to a repair point. A red EPC fault light indicates a serious issue, requiring immediate pulling over and contacting a repair technician. Continued driving could damage core components or compromise safety.
19
5
Share

Do I need to register with the DMV when changing car rims?

Modifying rims is not allowed in principle, so changing rims also requires registration. Before modification, you can consult the DMV to understand the situation, otherwise it will not pass the annual inspection and you will be ordered to restore the original condition. Extended information: According to the "Motor Vehicle Registration Regulations": If you change the body color, model, performance, purpose and structure of a licensed motor vehicle, or replace the frame, body or engine, the owner must apply to the DMV for modification registration. If you change rims of the same size, the annual inspection can basically pass, but the appearance should not change too much, unless the local policy is very strict.
13
0
Share

What Factors Are Related to Poor Car Air Conditioning Performance?

Lack of refrigerant, poor heat dissipation from components like the radiator and condenser, or a dirty filter affecting airflow can all impact the cooling efficiency of a car's air conditioning system. If you notice poor cooling performance, it's advisable to contact a 4S shop for inspection and repair to ensure a comfortable driving experience. Here are specific details: 1. Insufficient Freon: Visit a repair shop or maintenance center to replenish Freon. 2. Low antifreeze level: Seek professional assistance at a repair shop or 4S shop. 3. Aging air filter: If you're capable, purchase and install a new one from Taobao. Otherwise, consult a repair shop or 4S shop. 4. High refrigerant pressure: Use a pressure gauge to check the refrigerant pressure and clean the condenser.
16
4
Share

How to Buy Car Tires?

When purchasing tires, it is essential to fully consider the vehicle's performance, driving habits, road conditions, and climate conditions, then select the appropriate tires based on the product positioning. Here is relevant information about car tires: 1. Function: Car tires are one of the critical components of a vehicle, directly contacting the road surface. Together with the car suspension, they mitigate the impact during driving, ensuring good ride comfort and smoothness. They also ensure excellent adhesion between the wheels and the road, improving traction, braking, and off-road capability. Additionally, they bear the vehicle's weight, making the role of tires increasingly important. 2. Classification: Tires can be categorized by structure into radial tires and bias tires; by tread pattern into ribbed tires, transverse pattern tires, mixed pattern tires, and off-road pattern tires.
3
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.