What procedures are required for buying a car and obtaining a license plate?

2 Answers
Chris
07/29/25 7:53am
Procedures required for buying a car and obtaining a license plate: 1. When driving from the place of purchase to the place of use, you need to apply for a temporary license plate at the vehicle management office where the car was purchased; 2. For vehicles transferring registration or new cars that have not obtained a formal license plate in the local area, you need to apply for a temporary license plate at the vehicle management office where the car was purchased; 3. Bring your ID card, vehicle purchase receipt, compulsory traffic insurance receipt, and vehicle qualification certificate to the place where driver physical examinations are conducted; 4. Make copies at the window, go to the motor vehicle service hall, pay at the payment window, and complete the procedures at the service window. License plates, commonly known as car plates, refer to the plates hung on the front and rear of a vehicle. They are usually made of aluminum, sheet iron, plastic, or paper, and display the vehicle's registration number, registration region, or other relevant information.
Was this review help?
11
5
Share
VonReed
08/12/25 11:08am
As a first-time car buyer, I'm super excited but there are quite a few procedures to follow step by step. After purchasing the car, the first thing is to arrange compulsory traffic insurance and commercial insurance. You need to bring the car purchase invoice and vehicle certification to the insurance company, otherwise driving without them is illegal. Then, make an appointment with the vehicle management office for an inspection to ensure the car meets safety standards. Once it passes, take your ID card, proof of residence, insurance policy, and the original vehicle certification to the vehicle management office to submit materials, pay the purchase tax and license plate fees. When choosing a license plate number, you can either pick randomly or customize it. I chose one that I liked. The whole process is time-consuming, so it's recommended for beginners to prepare a checklist of required documents in advance or ask the 4S store to handle it for you, which can save a lot of hassle. Especially don't forget the online payment option for the purchase tax—it's super convenient.
Was this review help?
16
3
Share
Expand All
More Forum Discussions

How many points are deducted for stalling in Subject 2?

Causing the engine to stall once due to improper operation will result in a deduction of 10 points. Other common situations that lead to point deductions include the following: Vehicle crossing the line, failing to reverse into the garage, stopping midway, not following the prescribed route or sequence, or exceeding the allotted time will result in a deduction of 100 points. For slope parking: if the right side of the vehicle is more than 30 cm from the roadside line after parking, 10 points are deducted; if it exceeds 50 cm, 100 points are deducted. Running over or brushing against the line results in a 100-point deduction. If the front bumper is not aligned with the pole line and deviates by more than 50 cm, 10 points are deducted; if it exceeds 50 cm, 100 points are deducted. Subject 2 has a maximum score of 100 points, with evaluation criteria set for failing, deducting 20 points, deducting 10 points, and deducting 5 points. The test is considered passed under the following conditions: ① For large passenger vehicles, tractors, city buses, medium-sized passenger vehicles, and large trucks, a score of 90 or above is required; ② For other vehicle types, a score of 80 or above is required.
10
1
Share

How to Adjust the Headlights of Geely New Vision?

Geely New Vision can be adjusted via the knob at the rear of the headlight assembly, allowing owners to adjust the lights themselves using tools. Lift the engine hood, locate the adjustment knob at the back of the headlight assembly, and use the appropriate tool for adjustment. Before adjusting, determine whether the knob controls left-right or up-down movement. The following precautions should be noted when adjusting the headlights: 1. Choose a dim environment: such as an underground parking lot or at night. Park the car facing a wall, ensuring the front of the car is aligned with the wall and about 5-6 meters away. 2. Cover one headlight with an opaque thick cloth: Adjust each headlight individually. To ensure the light beam position is correct for normal driving, avoid adjusting with the vehicle unloaded; having a friend sit in the driver's seat is recommended. 3. Mark the headlight position on the wall: Also mark the position on the wall corresponding to the car emblem (center of the front). Measure the distance from each headlight mark to the center mark; the distances should be equal. If the lights are tilted outward or inward, refer to the vehicle's manual and use a screwdriver for fine adjustments to ensure the headlights are symmetrically aligned. 4. Adjust the beam height appropriately: The right headlight should be level, while the left headlight should be raised about 10cm, but not too high to avoid blinding oncoming drivers.
19
0
Share

How much engine oil does the Kia Borrego require?

The Kia Borrego requires approximately 4.5 liters of engine oil. Here are some precautions when adding engine oil: 1. Ensure the oil level is between the min and max marks on the dipstick when adding oil. 2. The oil level must not exceed the max mark or fall below the min mark. 3. If the oil level is below the min mark, it may lead to insufficient lubrication in the engine. 4. When changing the oil, replace the oil filter as well.
12
4
Share

How many watts is considered the brightest for a headlamp?

The brightest headlamps can reach up to 300 watts. Here is the relevant information: 1. Introduction: A headlamp (headlamp), as the name suggests, is a lamp worn on the head, serving as a hands-free lighting tool. 2. Function: Headlamps are an essential piece of equipment for outdoor activities, such as night hiking and camping. Although some argue that flashlights serve a similar purpose, modern headlamps incorporate energy-saving technologies like LED cold light technology and innovations in lamp cup materials for high-end models, which are unmatched by budget flashlights. Therefore, headlamps can replace flashlights, but flashlights cannot replace headlamps.
13
5
Share

What Causes the Fault Light on a New Energy Charger to Flash?

New energy charger fault light flashing is due to the household socket not having a ground wire. The home portable charging gun provided by the 4S store must be plugged into a socket with a ground wire to charge properly. Since cars heavily rely on batteries, all vehicles have a battery indicator on the dashboard. If there is a fault in the charging system, an alarm will be triggered. Below are the benefits of new energy vehicles: 1. Fuel savings: New energy vehicles generally use natural gas, petroleum gas, hydrogen, or electricity as power sources, saving fuel energy. 2. Reduced exhaust emissions: New energy vehicles produce no exhaust emissions, effectively protecting the environment. Electric vehicles generate no tailpipe emissions and cause no pollution. Hydrogen-powered vehicles emit only water, posing no environmental pollution. Because they are essentially zero-emission, they are also exempt from license plate restrictions. 3. High efficiency: New energy vehicles typically employ new technologies and structures, making them more efficient.
3
1
Share

How much fuel is consumed when idling with the air conditioning on for an hour?

When the car is stationary with the air conditioning on for an hour, it typically consumes fuel worth approximately 4-5 RMB. Detailed explanation: Taking the 1.5 Fengxing 330 as an example, the actual fuel consumption is at least 9 liters per 100 kilometers. In urban areas with air conditioning, the consumption varies around 10 liters depending on driving habits. If driving in the city with the air conditioning on for an hour, the cost would be around 35 RMB. Additional information: Methods for maintaining car air conditioning: 1. Comprehensive inspection of the air conditioning system: Before first use in summer, inspect the air conditioning system, such as checking the refrigerant and whether the air filter is dirty via the reservoir, and if there are any foreign objects in the radiator. 2. Pay attention to cleaning the air conditioning: Some beginners only think about cleaning the air conditioning when its performance deteriorates, which is incorrect. The air filter should be replaced regularly, especially since Beijing's spring has a lot of sand and willow catkins, which can stick to the filter and breed bacteria, causing a musty smell. Therefore, it's best to replace the filter once every year after spring. 3. Do not turn off the air conditioning immediately after parking: After reaching the destination, most owners turn off the air conditioning and leave immediately. Unlike in autumn and winter, the significant temperature difference between inside and outside the car in hot summer can cause the air conditioning system to become moldy and breed mold.
3
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.