What procedures are required for a six-year driver's license renewal?

What is the function of the clutch in a car?

The function of the clutch in a car is: 1. Facilitate smooth starting: During startup, the clutch separates the engine from the transmission. There is a slipping phenomenon between the driving and driven parts of the clutch, allowing the torque transmitted by the clutch to gradually increase from zero. This results in a gradual increase in the driving force of the car, enabling a smooth start. 2. Convenient gear shifting: During driving, the clutch is used to separate the engine from the transmission when shifting gears. 3. Prevent excessive stress on the transmission system and damage: During emergency braking, the wheels decelerate rapidly, while the transmission system connected to the engine maintains its original rotational speed due to inertia. This creates an inertial torque in the transmission system that is much greater than the engine torque, making the transmission components prone to damage. 4. Reduce torsional vibration impact: The output torque of the engine is usually unstable. The inertia of its own rotating system can reduce torsional vibration, and the damping springs in the clutch can mitigate the torsional vibration impact caused by the engine, thereby extending the lifespan of the transmission gears.

13

1

Share

What are the gear positions of motor vehicles?

Here is an introduction to the gear positions of motor vehicles: 1. All gear positions: Automatic transmissions have P, R, N, D, 2 or S, and L or 1. 2. Parking gear: P stands for Parking gear, also known as the parking position. 3. Other gear positions: R is Reverse, N is Neutral, D is Drive, also known as the driving position. 4. Sport mode: S or 2 represents Sport mode. 5. Low gear: L or 1 is Low gear, also known as first gear. Here is additional information related to gear shifting: 1. Gear shifting: When switching to this gear, the transmission can shift freely, but there will be a delay in shifting, keeping the engine at high RPM for a longer time, allowing the vehicle to move at a low gear with high RPM for an extended period, thereby achieving greater torque output and acceleration. 2. Upshifting technique: The key to smooth upshifting lies in the "throttle blip" magnitude. The "throttle blip" distance should be determined based on the gear being shifted to—the higher the gear, the longer the "throttle blip" distance.

6

5

Share

Can License Plates Be Changed?

Whether license plates can be changed depends on the following situations: 1. After registration: The license plate number cannot be changed because current license plates are for life and cannot be bought or sold. The only solution is to transfer the vehicle ownership. After the transfer, you can reapply for registration, at which time you can choose a new number. 2. Before registration: If you have only selected a number online but have not registered it, you can change the license plate number. After selecting a number, the owner should submit the required documents to the vehicle management office within the specified time to apply for registration. If the procedure is not completed within the designated time, the selected number will automatically become invalid and will be returned to the pool of available numbers. Note that there are only three opportunities to change the number.

2

Share

Can the color of position lights be changed?

Currently, there are no explicit legal regulations regarding position lights. However, if the modified position lights differ significantly in color from the original factory-installed ones, it is highly likely to result in a traffic police fine. Generally, position lights are primarily yellow or white. Below is relevant information about position lights: 1. Introduction: When the light switch is turned to the first position, the small lights that illuminate at the front and rear are the position lights (also referred to as evening running lights, which are turned on when it is not completely dark; the next position after position lights is the low beam, while the high beam refers to the main headlights). 2. Purpose: To indicate the width of the vehicle and alert other drivers and vehicles behind. Position lights are used during evening driving to ensure visibility to other vehicles.

3

Share

What are the dangers of coasting in neutral gear?

When coasting in neutral gear, the transmission is in a neutral working state, the driving wheels will lose driving force, and the connection between the engine and the driving wheels will be lost, resulting in the car relying solely on its own inertia to coast forward, which can easily lead to traffic accidents. The following is a detailed introduction about car gears: 1. Speed aspect: The speed corresponding to first gear is 0-5km/h. The speed corresponding to second gear is 5-20km/h, the speed corresponding to third gear is 20-40km/h, the speed corresponding to fourth gear is 40-60km/h, and the speed corresponding to fifth gear is 60-100km/h. 2. Gear shifting timing: The general gear shifting timing for cars is when the engine speed is 2000r/min, and it should not exceed 2500r/min. For some high-displacement and high-power engines, gear shifting can be done around 3000r/min.

3

0

Share

Does a new car require an annual inspection sticker or an exemption sticker?

Newly purchased vehicles require an annual inspection sticker to be legally driven on the road. The inspection sticker for new cars is issued by the vehicle management office after license plate registration, along with the vehicle registration certificate. If the inspection sticker is missing, owners should return to the vehicle management office for a replacement. The "6-year exemption" refers to eligible vehicles being exempt from on-site inspection, but owners still need to visit the vehicle management office every 2 years to complete paperwork and obtain a new inspection sticker. More details about annual inspections are as follows: 1. Explanation one: Vehicle annual inspection refers to the mandatory examination conducted once a year according to the "Technical Requirements for Motor Vehicle Operation Safety" for vehicles that have obtained official license plates and registration certificates. The purpose is to check the main technical conditions of vehicles, encourage proper maintenance, ensure vehicles remain in good condition, and guarantee driving safety. 2. Explanation two: Vehicle annual inspection is a mandatory examination for all vehicles that have obtained official license plates and registration certificates. It's equivalent to an annual physical examination for vehicles according to the "Technical Requirements for Motor Vehicle Operation Safety", helping to promptly identify and eliminate potential safety hazards, encourage proper maintenance, and reduce traffic accidents - commonly referred to as vehicle inspection.

5

4

Share

What procedures are required for a six-year driver's license renewal?

What is the function of the clutch in a car?

What are the gear positions of motor vehicles?

Can License Plates Be Changed?

Can the color of position lights be changed?

What are the dangers of coasting in neutral gear?

Does a new car require an annual inspection sticker or an exemption sticker?

Is Replacing a Fender Considered a Major Repair?

What to Do When the Steering Wheel is Locked?

Can private vehicles postpone their annual inspection?

What is the fuel consumption of the Mercedes-Benz GLA?