What problems will occur if the ball joint rubber boot is damaged?

1 Answers
JamesMarie
07/29/25 7:03pm
The following phenomena will occur if the suspension rubber boot is damaged: Specific phenomena: When passing over speed bumps, cobblestone roads, or dirt roads, you will hear a "clanging" metal knocking sound. On roads with significant potholes, the noise will persist continuously. If the damage is quite severe, it will continuously transmit minor vibrations to the steering wheel. The function of the car shock absorber rubber boot: The car shock absorber rubber boot is made of plastic rubber and serves as a buffer and shock absorber. When passing over speed bumps with the suspension at full compression, it helps lift the body slightly upward after the tires fully land, providing a slightly upward sensation and excellent comfort. It also provides sound insulation, alleviates tire noise caused by the contact between the tires and the ground, and reduces direct impacts on the car when the tires encounter bumps.
Was this review help?
14
2
Share
More Forum Discussions

What is the validity period of an initial driver's license?

There are three types of validity periods for motor vehicle driver's licenses: six years, ten years, and long-term. The initial issuance of a motor vehicle driver's license is valid for 6 years. If no scoring cycle reaches 12 points within the 6-year validity period, the license can be renewed to a 10-year validity period. If no scoring cycle reaches 12 points within the 10-year validity period, the license can be renewed to a long-term valid motor vehicle driver's license. Introduction to the renewal time of motor vehicle driver's licenses: 1. Regulations on driver's license renewal time: Article 35 of the Ministry of Public Security Order No. 91 stipulates that motor vehicle drivers should apply for renewal at the vehicle management office of the driver's license issuing place within 90 days before the expiration of the driver's license. If a motor vehicle driver fails to renew the license within one year after the expiration, the license will be automatically canceled by the system. 2. Regulations on the time of driver's license inspection: Article 48 of the Ministry of Public Security Order No. 91 stipulates that motor vehicle drivers aged 60 or above, or those holding driving licenses for large passenger vehicles (A1), tractor vehicles (A2), urban buses (A3), medium-sized passenger vehicles (B1), large trucks (B2), trolleybuses (N), or trams (P) should undergo a physical examination once a year and submit a physical condition certificate issued by a medical institution at or above the county or military regiment level within 15 days after the scoring cycle ends.
15
0
Share

What to Do If Driving License Is Lost?

A motor vehicle driver who has lost their driving license should apply for a replacement at the vehicle management office of the issuing authority of the original driving license. Here are the specific details about driving licenses: 1. Classification: The Ministry of Public Security officially issued the "Regulations on the Business of Motor Vehicle Driving Licenses," introducing a graded system for motor vehicle driving licenses. The licenses are divided into 15 categories: A1, A2, A3, B1, B2, C1, C2, C3, C4, D, E, F, M, N, and P. 2. Renewal Regulations: If a motor vehicle driver has not accumulated 12 or more penalty points in any scoring cycle during the six-year validity period of their driving license, they can renew it for a ten-year validity period. If they have not accumulated 12 or more penalty points in any scoring cycle during the ten-year validity period, they can renew it for a long-term valid driving license.
8
0
Share

What brand is Champiro tires?

Champiro tires are the premium product line of Giti brand tires. Here is an introduction about the Giti brand: 1. Introduction: Giti is a tire manufacturing enterprise established in 1993 with its headquarters located in Shanghai. 2. Belief: Everything starts with the customer. Therefore, Giti tires deliver high value, reliable performance, and quality. 3. Responsibility: Sustainability is a core belief as part of Giti's environmental initiatives, which can offset carbon emissions equivalent to 100 years of Giti's production. Giti has partnered with Conservation International Foundation, donating $1 million for forest conservation projects in Sumatra, Indonesia, and the mountainous regions of Southwest China. As a manufacturing enterprise, Giti consumes approximately 500,000 to 550,000 tons of coal annually, equivalent to emitting 1 million tons of carbon dioxide or 270,000 tons of carbon waste into the air each year.
17
1
Share

What is the tire model of the Changan Oushang?

The tire model of the Changan Oushang is 185/70R14. Below are the features of the Changan Oushang: 1. Spacious Interior: The Oushang measures 4360mm in length, 1685mm in width, and 1820mm in height, making it the largest in its class. It also offers two suspension options: a four-piece alloy steel plate spring rear suspension and a spiral spring suspension, ensuring a more comfortable ride. 2. Front Engine, Rear-Wheel Drive: The front-mounted engine effectively enhances driving safety and ride comfort while reducing cabin noise and vibration. The rear-wheel drive technology provides stronger propulsion, better cornering, rapid acceleration, and climbing performance, showcasing advantages over front-engine front-wheel drive and mid-engine rear-wheel drive configurations. 3. Efficient Power: The new-generation 1.3L high-efficiency engine delivers ample power while conserving energy consumption. It offers a maximum power of 68KW/6000rpm and a maximum torque of 115N.m/3000~5000rpm. Additionally, it is equipped with the internationally advanced 1.5L 4G15 engine, providing multiple power options to further reduce energy consumption.
7
0
Share

What is the Difference Between the Clutch and the Brake?

The differences between the clutch and the brake are as follows: 1. Different positions: The clutch is located on the left, while the brake is on the right. 2. Different functions: The brake's function is to decelerate or stop the vehicle by braking the wheels. The clutch's role is to transmit the engine's output torque smoothly to the transmission via the clutch assembly. Below are further details: 1. In an automatic transmission vehicle, the left pedal is the brake, and the right is the accelerator. Only one foot, typically the right, is used to operate these pedals—left-foot braking and right-foot acceleration are prohibited. In a manual transmission vehicle, the left pedal is the clutch, the middle is the brake, and the right is the accelerator. 2. The clutch is situated within the flywheel housing between the engine and the transmission, secured to the rear plane of the flywheel with screws. The output shaft of the clutch serves as the input shaft of the transmission.
20
3
Share

Key Points for Starting an Automatic Transmission Vehicle on a Slope

Operation method for starting an automatic transmission vehicle on a slope: When stopped on a slope, press the brake pedal while parking. Release the brake when the vehicle has started moving. Then release the handbrake and press the accelerator pedal, which can effectively prevent rolling back caused by brake interruption. Below is additional information: Gear introduction: The main reason for rolling back during automatic transmission slope starts is insufficient engine traction force during startup. Therefore, pressing the accelerator to increase engine RPM during startup can prevent rolling back. Automatic transmission gears are: P: Parking gear - locks the wheels after shifting, keeping the vehicle stationary (used when parking); R: Reverse gear - used when reversing; N: Neutral gear - should be engaged when waiting at traffic lights along with applying the handbrake to avoid accidental acceleration while stationary; D: Drive gear - used when moving forward, with no need to shift gears under normal driving conditions as the vehicle's built-in shifting program can be fully trusted
5
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.