What problems can occur with low transmission fluid?

1 Answers
VanHeidi
07/29/25 11:31am
Low transmission fluid can cause the following problems: 1. Jerky gear shifting and rough transmission operation; 2. When accelerating, the increase in engine RPM doesn't correspond with vehicle speed - while RPM rises normally, the vehicle fails to gain speed properly, feeling as if it's not in gear, and starting becomes particularly difficult; 3. In severe cases, it can lead to transmission overheating and damage, as bearings lack proper lubrication, increasing friction and wear; 4. Noticeable noise, especially during high-speed driving. The functions of transmission fluid are: 1. Maintaining cleanliness of the gear system; 2. Lubricating transmission components. Warning signs for transmission fluid replacement include: 1. Vehicle vibration and jerky gear changes; 2. Transmission overheating warning on the dashboard; 3. Engine stalling; 4. Unusual noises.
Was this review help?
8
4
Share
More Forum Discussions

What are the hidden dangers of replacing the valve cover with aluminum alloy?

The replacement of the valve cover with aluminum alloy poses no safety hazards. Below are relevant details about the valve cover: Function: The primary role of the valve cover is to protect the engine camshaft while forming a nearly enclosed cavity together with the cylinder head. Inside, there are oil return and supply passages connected to the cavity. The valve cover effectively prevents dust from contaminating the engine oil or entering to accelerate wear on valve train components. Therefore, it is necessary to regularly inspect the sealing condition of the valve cover. If oil leakage is detected, timely action should be taken to ensure the engine's durability. Sealant Application: If oil leakage issues are resolved after replacing the gasket, applying sealant is entirely unnecessary. However, if leakage persists post-gasket replacement, applying sealant can enhance the sealing of the valve cover. If necessary, the valve cover itself can also be replaced. Note that applying sealant may complicate future valve cover replacements, as the sealant must first be removed, potentially increasing repair costs.
7
1
Share

What is the main function of a car differential?

Here is an introduction to the main functions of a car differential: Power transmission: Transmits the power output from the engine to the wheels. Speed reducer: Divides the torque already increased by the main reducer into two parts and distributes it to the left and right half-shafts. Acts as the main reduction gear: Serves as the main reduction gear, reducing the speed of the drivetrain before transmitting power to the wheels, and allows the wheels on both sides to rotate at different speeds. When the car turns, the distances traveled by the wheels on both sides are unequal within the same time—the outer wheel moves a greater distance than the inner wheel. As a result, the planetary gears on the differential cross shaft are affected by the resistance of the wheels. While revolving, they also rotate on their own, automatically increasing the speed of the outer wheel, speeding it up, and slowing down the inner wheel, thus performing the differential function.
8
2
Share

Is it dangerous to spray floral water in the car?

Spraying floral water in the car is dangerous. Here are some related introductions about spraying floral water in the car: Flammability: Many people overlook that floral water, like liquor, mousse, and perfume, needs to be kept away from fire and heat. This is because floral water contains 75% alcohol and 5% fragrance, making it flammable and easily ignited by an open flame. Therefore, after applying floral water, you must not immediately use an open flame, such as lighting mosquito coils, smoking, or using open-flame stoves. It is also important to avoid direct sunlight. Composition: Various floral waters sold on the market mainly consist of ethanol, water, etc., with an alcohol concentration as high as 70%, sometimes even higher. Additionally, floral water has a low ignition point, typically burning at around 24 degrees Celsius. Therefore, when using floral water, especially for children, it is best to dilute it with water first. In daily life, after applying floral water, do not immediately use an open flame, such as lighting mosquito coils or cooking.
6
1
Share

What does 4*2 mean in cars?

4×2 in cars indicates that the vehicle has 4 wheels, with 2 of them being drive wheels. Below is relevant information about vehicle drive systems: Four-wheel drive (4WD): This means both the front and rear wheels of the car have power. The engine's output torque can be distributed in different proportions to all wheels according to road conditions to improve the vehicle's driving capability. It is generally represented by 4X4 or 4WD. If you see these markings on a vehicle, it means the car has four-wheel drive capability. Two-wheel drive: In two-wheel drive systems, they can be further subdivided into front-engine rear-wheel drive (FR), front-engine front-wheel drive (FF), rear-engine rear-wheel drive (RR), and mid-engine rear-wheel drive (MR) based on the engine's position and the location of the drive wheels. The most commonly used configuration in two-wheel drive SUVs and sedans is front-engine rear-wheel drive. In this drive system, all the engine's power is delivered to the rear drive axle, which drives the rear wheels to propel the vehicle forward. It is generally represented by 4X or 2WD.
7
5
Share

Should the high beam be turned back after use in the subject three lighting test?

After turning on the high beam in the subject three lighting test, it must be turned back. Otherwise, points will be deducted for not turning it back, resulting in a failed test. The passing criteria for subject three: The road driving skills and safe civilized driving knowledge tests for subject three are each scored out of 100 points, and a score of 90 or above in each is required to pass. The challenges of the subject three test:
16
1
Share

What to Do When Car Headlights Get Water Inside and Stop Working?

Here are the solutions for car headlights getting water inside and not working: Turn on the headlights: The best way to deal with foggy headlights due to water ingress is to turn them on. At this time, it is best not to use high-temperature baking, as headlight materials are usually made of plastic. If the baking temperature is too high, it may soften and deform the headlight surface, affecting both appearance and functionality. Typically, after the headlights are turned on for a while, the fog will dissipate along with the heat through the vent pipe, without causing damage to the headlights or circuits. Use the cold air setting: If the owner has a high-pressure air gun or a hair dryer, set it to the cold air setting and blow air over areas in the engine compartment prone to moisture accumulation to accelerate air circulation and remove moisture.
12
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.