What precious metals can be extracted from a car's three-way catalytic converter?

Can Changing Spark Plugs Save Fuel?

Replacing spark plugs can save fuel and reduce consumption. If a spark plug is damaged, it can directly cause issues such as electrical leakage in the vehicle's ignition system, increased fuel consumption, decreased power, and most importantly, difficulty in ignition, affecting the normal operation of the vehicle. Severe erosion of the spark plug, such as scarring, damage, or melting and erosion of the electrode, indicates that the spark plug is damaged and should be replaced. Location of Spark Plugs: Spark plugs are installed on the side or top of the engine. In earlier models, spark plugs were connected to the distributor via ignition wires. However, over the past decade, most car engines have been modified to connect the ignition coil directly to the spark plug. Replacement Interval for Spark Plugs: Under normal maintenance conditions, spark plugs should be replaced every 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine type, so it's advisable to follow the manufacturer's manual. Typically, platinum spark plugs should be replaced at 40,000 kilometers, standard nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers.

16

3

Share

What is the purpose of highway laser lights?

The function of laser lights on highways is to provide alerts and warnings. Here are the detailed explanations: 1. Laser lights can help drivers avoid fatigue. The green laser is a warning laser light on highways designed to prevent fatigue driving. It has high brightness and long range, and can effectively stimulate the driver's brain through changes in light, thereby alleviating visual fatigue caused by monotonous driving conditions during long nighttime drives. 2. Green laser lights create a beam network. Green laser lights form an interlaced network of beams in the air above the direction of oncoming traffic, without obstructing the driver's view. Together with strobe lights and high-pitched alarms, they create a tripartite warning system of sound, light, and electricity, stimulating the driver's senses and enhancing driving safety awareness. The effect is particularly noticeable during nighttime, rain, snow, fog, and other adverse weather conditions.

9

0

Share

Can You Practice Driving in the Snow?

You can practice driving in the snow, but it is necessary to maintain a proper speed and pay attention to details when starting and braking. Precautions for Starting: When igniting and starting, avoid wheel spinning. Remove the snow around the vehicle and tires beforehand, especially the snow on the front windshield to ensure good visibility for the driver. To prevent fogging caused by temperature differences, it is advisable to keep a dry cloth inside the car. Precautions While Driving: During normal driving in snowy conditions, react and brake earlier than usual. The friction coefficient on icy or snowy roads is only 0.1 to 0.2, which significantly increases the braking distance. Only by reacting early can you effectively avoid accidents. Use low gear for both uphill and downhill driving, and avoid shifting gears midway. When going uphill, be careful not to stall, as it can be difficult to start again. When going downhill, absolutely avoid coasting in neutral. Precautions for Braking: Whether the vehicle has ABS or not, do not shift to neutral. Instead, use the engine's traction to slow down. For vehicles with ABS, press the brake while controlling the direction, and avoid sudden steering. For vehicles without ABS, use the manual intermittent braking method to stop.

10

3

Share

How to Properly Control the Clutch in Subject 2?

To control the clutch in Subject 2, mastering the semi-engaged state is essential. The semi-engaged state can be simply judged through the following aspects: 1. Vehicle vibration: When reaching the semi-engaged state, the vehicle will vibrate, and you can feel it by placing your hands on the steering wheel. Especially on a slope, when the clutch is lifted to the semi-engaged state, the car will have a tendency to move forward. At this point, hold the position, gently apply some throttle, and start smoothly. 2. Foot sensation: When you notice a change in the engine sound, you will also feel a slight resistance against your foot on the clutch pedal. 3. Observe the tachometer: When you see a noticeable drop in the tachometer, you can also determine that the car has reached the semi-engaged state.

3

2

Share

What Causes the Dripping Sound After Engine Shutdown?

Engine has dripping sound This is the sound of thermal expansion and contraction. When driving, the exhaust pipe gets very hot, and after parking and turning off the engine, the exhaust pipe cools down, causing the metal to expand and contract with heat, thus producing this sound. Below is relevant information about automobile exhaust pipes: 1. Introduction: The automobile exhaust bellows, also known as the automobile exhaust pipe flexible hose, is installed in the exhaust pipe between the engine exhaust manifold and the muffler. It provides flexible connection for the entire exhaust system, thereby reducing vibration and noise, facilitating installation, and extending the service life of the exhaust muffler system. 2. Classification: Exhaust pipes are generally divided into: standard original pipes, backpressure pipes, semi-backpressure pipes, and straight-through pipes.

19

5

Share

What Causes a Car Battery to Drain Completely?

Car battery depletion may result from insufficient battery electrolyte or internal battery failure leading to damage. Below are maintenance methods for car batteries: 1. In-car electricity usage: Maintain the vehicle battery by avoiding activities like listening to the radio at high volume, charging mobile phones, or using air pumps while the engine is off. Prolonged use can easily drain the battery, and frequent depletion significantly reduces its lifespan. 2. Highway/long-distance driving: Regular highway driving offers many benefits, not only clearing carbon deposits from the vehicle but also fully charging the battery. Generally, driving on the highway for more than an hour can fully charge the car battery, keeping it in optimal condition. 3. Avoid prolonged vehicle inactivity: If the car remains unused for an extended period, disconnect the battery cables or start the vehicle every two weeks and drive several dozen kilometers to ensure normal battery function. 4. High-power electrical connections: Many modern car appliances, such as car refrigerators, vacuum cleaners, and air pumps, have high instantaneous power. Avoid directly powering them from the car battery. Instead, start the vehicle first before connecting these electrical devices.

12

5

Share

What precious metals can be extracted from a car's three-way catalytic converter?

Can Changing Spark Plugs Save Fuel?

What is the purpose of highway laser lights?

Can You Practice Driving in the Snow?

How to Properly Control the Clutch in Subject 2?

What Causes the Dripping Sound After Engine Shutdown?

What Causes a Car Battery to Drain Completely?

What does the sawtooth lane marking mean?

Do I need to go in person for the annual vehicle inspection?

What is the Principle of Headlight Height Adjustment?

Can the ECO mode of the Avalon be turned off?