What powers the windshield wipers?

1 Answers
LeLucy
07/30/25 1:20am
The power source of the windshield wipers comes from an electric motor, which serves as the core of the entire wiper system. The quality requirements for the wiper motor are very high, as it utilizes a DC permanent magnet motor. The wiper motor installed on the front windshield is integrated with the worm gear mechanical assembly. The function of the worm gear mechanism is to reduce speed and increase torque. Its output shaft drives a four-bar linkage mechanism, which converts continuous rotational motion into a side-to-side oscillating motion. Automotive windshield wipers, also known as wipers, are devices used to sweep away raindrops and dust adhering to the vehicle's windshield, thereby improving the driver's visibility and enhancing driving safety.
Was this review help?
16
1
Share
More Forum Discussions

What tires are best for the Volkswagen Teramont?

Depending on the configuration, the Teramont is equipped with 18-inch, 19-inch, or 20-inch wheels. The tire specifications include 245/60R18, 255/55R19, and 255/50R20. All models come with a non-full-size spare tire. Below is an introduction to the tires: 1. They support the entire weight of the vehicle and bear the load of the car; they transmit traction and braking torque, ensuring the adhesion between the wheels and the road. 2. They reduce and absorb vibrations and impacts during driving, preventing severe vibrations and premature damage to automotive components. 3. They adapt to the high-speed performance of the vehicle and reduce driving noise, ensuring driving safety, handling stability, comfort, and energy efficiency.
14
0
Share

How to Drive a Changan Automatic Transmission Car?

At this point, the ACC light is on, then press once more, and the vehicle will perform a self-check; it is recommended not to skip the self-check step every time you cold start. Under normal circumstances, the engine will start within 3 seconds of pressing the ignition switch. If the engine is difficult to start, avoid frequent attempts. You can choose to warm up the car in place, and the duration can be adjusted according to the environment; specifically, you can refer to the water temperature gauge on the dashboard. Shift to D gear, release the handbrake (for electronic handbrakes, simply press the button briefly); before starting, observe the road conditions clearly through the rearview mirror to ensure it is suitable for starting. Start moving; after starting, quickly merge onto the road and drive at the designated speed; smoothly press the accelerator according to road conditions for a safe journey.
5
5
Share

How Does an In-Car Air Purifier Work?

In-car air purifiers work by utilizing a motor and fan inside the device to circulate the air within the vehicle. The polluted air passes through an air filter inside the purifier, which removes or adsorbs various pollutants. Types of in-car air purifiers include: 1. Filter-based; 2. Electrostatic precipitator; 3. Ozone-based; 4. Plasma cluster ion. The functions of in-car air purifiers are: 1. Effectively settling various inhalable suspended particles in the air, preventing harmful floating particles from being inhaled; 2. Killing and destroying bacteria, viruses, mold, and mildew, removing sources of disease such as dead skin flakes and pollen from the air, reducing the spread of diseases through the air; 3. Eliminating unpleasant odors from the air and continuously replacing indoor air to ensure healthy air circulation; 4. Neutralizing harmful gases released into the air, reducing physical discomfort caused by inhaling these gases.
14
5
Share

How to turn off ESP without an ESP button?

If your vehicle is confirmed to have ESP, you can turn on the hazard lights after powering on the vehicle, then press the accelerator pedal five times consecutively. Upon hearing a "ding" sound, it indicates the ESP function has been deactivated. Below are relevant explanations: 1. Concept of ESP: ESP generally refers to the Electronic Stability Program, which is a collective term for systems or programs designed to enhance vehicle handling performance while effectively preventing loss of control when the vehicle reaches its dynamic limits. 2. Function of ESP: It analyzes vehicle driving state information transmitted from various sensors and then issues corrective commands to systems like ABS and EBD to help maintain dynamic balance. ESP enables the vehicle to maintain optimal stability under various conditions, with particularly noticeable effects in cases of oversteer or understeer.
2
2
Share

How to Turn On High Beam and Low Beam Lights?

The method to turn on high beam and low beam lights: The control switch for high beam and low beam lights is located on the lever on the left side of the steering wheel. The middle position is for low beam, while the first and third positions are for high beam. The high beam icon is blue with a straight line shape, while the low beam icon is green with a downward-sloping line. Both high beam and low beam lights are part of the headlights, primarily used for nighttime driving illumination. High beams have a higher angle and longer illumination distance, suitable for roads with poor visibility and no street lighting. Low beams have a lower angle and shorter distance, often used on well-lit roads with good conditions. In a car's lighting system, besides headlights, there are also parking lights, brake lights, fog lights, etc., each serving different purposes.
7
2
Share

How to Fix a Battery That Won't Hold a Charge?

Here are the reasons and solutions for a battery that won't hold a charge: 1. The reason why the car battery does not hold a charge may be insufficient electrolyte in the battery, insufficient battery voltage, or sulfation of the battery electrodes. If the electrolyte is insufficient, you can add distilled water or pure water to the battery, but do not use tap water, as this will cause severe self-discharge of the battery. If the electrodes are sulfated, this cannot be repaired, and the battery needs to be replaced. 2. If the battery voltage is insufficient and below 11V, you can use the high-resistance repair function of a repair device to increase the voltage above 11V, so that the battery can be charged. If the battery voltage is below 10V and cannot be increased after charging and repair, the battery must be replaced.
8
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.