What platform does the Honda Accord use?

What Are the Causes of a Faulty Thermostat?

Due to prolonged warm-up time, electric flatbed trucks operate at lower water temperatures, causing combustion gases to form acidic substances with the water condensed on the cylinder walls, which corrode the cylinders and lead to thermostat failure. Below is some relevant information about thermostats: 1. Introduction: A thermostat automatically adjusts the amount of water entering the radiator based on the coolant temperature, altering the water circulation range to regulate the cooling system's heat dissipation capacity, ensuring the engine operates within an appropriate temperature range. 2. Working Principle: The most commonly used thermostat is the wax-type thermostat. When the coolant temperature is below the specified value, the refined paraffin inside the thermostat's temperature-sensing body remains in a solid state, and the thermostat valve closes the channel between the engine and the radiator under the action of a spring. The coolant then returns to the engine via the water pump, initiating a small internal circulation within the engine.

14

5

Share

What Temperature Rating for Windshield Washer Fluid in Winter

In winter, you should choose windshield washer fluid with a freezing point at least 10°C lower than the local minimum temperature. Here is relevant information about windshield washer fluid: 1. Cleaning performance: Windshield washer fluid is compounded from various surfactants and additives. Surfactants usually have functions such as wetting, penetrating, and solubilizing, thereby achieving the effect of cleaning and removing dirt. 2. Antifreeze performance: It can significantly reduce the freezing point of the liquid, thus playing an antifreeze role and quickly dissolving frost. 3. Anti-fog performance: A single-molecule protective layer forms on the glass surface. This protective film can prevent the formation of fog droplets, ensuring the windshield remains clear and transparent with a clear field of vision.

9

3

Share

Why Does the Alternator Belt Squeak?

Generator belt squeaking reasons are as follows: 1. Excessive clearance between piston and cylinder wall, overly tight piston pin assembly, or overly tight connecting rod bearing assembly. 2. Piston knocking, loose connecting rod bearings, piston ring leakage, broken piston pin. 3. Severely loose connecting rod bearing cap fixing bolts or completely melted connecting rod bearing alloy, severely loose flywheel fixing bolts. 4. Excessive valve clearance, excessive clearance between tappet and its guide hole, cam profile wear, excessive clearance between valve stem and its guide, broken valve spring, radial fracture of camshaft timing gear, loose valve seat ring, stuck valve unable to close.

6

1

Share

Where is the cabin air filter located in the Dongfeng Tianjin?

Dongfeng Tianjin does not have a cabin air filter. The Dongfeng Tianjin is a new generation medium-duty truck independently developed by Dongfeng's R&D team. Recognized as the value benchmark for Chinese medium-duty trucks, it boasts advantages such as high technological content, high reliability, low emissions, and humanized design. The Dongfeng Tianjin series includes over 40 variants, suitable for both urban and intercity freight transportation. Additional Information: 1. As a premium product launched by Dongfeng Commercial Vehicle Company, the Dongfeng Tianjin incorporates numerous advanced technologies during its development process. These include cab sealing design, engine electronic control common rail technology, standardized frame hole positioning design, and chassis piping harness design. 2. The Dongfeng Tianjin features an efficient and convenient maintenance inspection system. Vehicle faults can be diagnosed via computer detection, with automatic alarms accurately identifying fault sources. It adopts CAN bus architecture to simplify wiring harness interfaces, uses sealed waterproof connectors to reduce electrical failures, and high-end models employ centralized chassis power supply management for easier maintenance. 3. The Dongfeng Tianjin employs lightweight design throughout the vehicle, resulting in low fuel consumption and high load capacity while maximizing reserved modification capacity. In addition to standardized hole positioning, it features a front-mounted muffler and provides convenient electrical modification interfaces.

1

4

Share

When will the Avancier 2.0T China 6 be released?

The Avancier 2.0T China 6 was announced on March 27, 2020, with the release of related information for the debut model, and officially launched on March 31. Here are the extended details: 1. Exterior: The new model only underwent minor adjustments in details. Below the thick chrome trim on the front face, three black trim strips were added, giving the grille a more layered appearance, while the fog light area features a recessed chrome trim strip. Additionally, the high-end variants of the new model are equipped with a new multi-spoke large-size wheel design, enhancing its sporty look. The taillights have a flatter shape, with LED light strips forming a "C" pattern, making them more refined and sporty. The lower part of the rear end has been updated to a dual-sided quad-exhaust layout, though the added exhaust ports are merely chrome decorative elements, yet they still enhance the sporty appeal. 2. Powertrain: The new Avancier still comes with 1.5T and 2.0T engines, including an all-wheel-drive variant. However, the current Avancier only offers the China 6 version for the 1.5T model, while the 2.0T China 5 version has been discontinued in some cities this year, which has somewhat affected the sales performance of the current model. The new Avancier, while maintaining the same 2.0T powertrain, has been upgraded to meet the China 6 emission standards, providing consumers with more powertrain options. Moreover, the 2.0T engine in the new Avancier delivers more power compared to the high-power version of the Volkswagen Tiguan L 2.0T, further boosting its competitiveness among peers.

19

3

Share

How often are motorcycles inspected now?

Currently, motorcycles are inspected once every 2 years within the first 4 years; after exceeding 4 years, they are inspected once annually. Below is the extended information: 1. Passenger vehicles for commercial use: Passenger vehicles for commercial use are inspected once annually within the first 5 years; after exceeding 5 years, they are inspected once every 6 months. 2. Trucks and large or medium-sized non-commercial passenger vehicles: Trucks and large or medium-sized non-commercial passenger vehicles are inspected once annually within the first 10 years; after exceeding 10 years, they are inspected once every 6 months. 3. Small and mini non-commercial passenger vehicles: Small and mini non-commercial passenger vehicles are inspected once every 2 years within the first 6 years; after exceeding 6 years, they are inspected once annually; after exceeding 15 years, they are inspected once every 6 months. 4. Motorcycles: Motorcycles are inspected once every 2 years within the first 4 years; after exceeding 4 years, they are inspected once annually; tractors and other motor vehicles are inspected once annually.

10

2

Share

What platform does the Honda Accord use?

What Are the Causes of a Faulty Thermostat?

What Temperature Rating for Windshield Washer Fluid in Winter

Why Does the Alternator Belt Squeak?

Where is the cabin air filter located in the Dongfeng Tianjin?

When will the Avancier 2.0T China 6 be released?

How often are motorcycles inspected now?

How Does Oil Film Form on Car Windows?

Do You Need to Fully Depress the Brake When Shifting an Automatic Transmission?

Which Mazda vehicles use rotary engines

What to Do About Throwing Objects Out of Car Windows?