What place does the license plate Lu J belong to?

What is the actual fuel consumption of the Elysion 2.4?

Based on actual measurements, the Honda Elysion 2.4's fuel consumption shows 9.9 liters per 100 kilometers on the vehicle's computer, while the measured fuel consumption is 9.15 liters. Approximately 40% of the test route involved congested traffic. The average speed during this fuel consumption test was only 24 km/h, indicating relatively heavy traffic conditions. Under normal driving conditions, the Elysion's average fuel consumption can be kept within 10 liters. Below are additional details: 1. Elysion fuel consumption test: The vibration level during the Elysion's operation is acceptable but not particularly firm. When encountering prolonged traffic lights, the start-stop system may automatically restart the engine before the vehicle moves forward to meet performance requirements (such as keeping the air conditioning on during the test). 2. Methods to reduce fuel consumption: Improving fuel economy depends on multiple factors, including driving conditions, driving habits, vehicle condition, and load.

9

0

Share

What is the function of the diaphragm spring in a diaphragm spring clutch?

The diaphragm spring in a diaphragm spring clutch serves the following functions: 1. It acts as both the pressure spring and the release lever, reducing the number of components and decreasing weight; 2. It shortens the axial dimension of the clutch. Below are the maintenance methods for the clutch: 1. Minimize clutch pedal usage to prevent clutch slippage and clutch disc burning; 2. Keep the contact surfaces between the release lever and the bearing cap spiral inclined plane clean and lubricated with engine oil; 3. When oil contamination or rust occurs on the friction discs, driving discs, or pressure plate inside the clutch, disassemble to remove the oil stains and clean thoroughly with gasoline; 4. Replace the friction discs if symptoms like exposed rivet heads, cracks, breakage, or large-area scorching are found. Additional information: The clutch is located within the flywheel housing between the engine and transmission, serving to disconnect or transmit the power output from the engine.

3

1

Share

Where are the reinforcement ribs located on a car?

Most of the reinforcement ribs on a car are located on the roof, engine hood, and doors. The simplest form of a reinforcement rib is a rectangular column attached to the product's surface. However, to meet certain production or structural requirements, the shape and dimensions of the reinforcement ribs may need to be modified. Reinforcement ribs are generally found on some exterior cover panels. They enhance the strength of these panels, allowing automakers to reduce their thickness and weight, which contributes to the overall lightweighting of the vehicle. However, reinforcement ribs are typically not used on the body frame, as the passenger cell of the body frame is made from high-strength materials. Additional functions of reinforcement ribs: During assembly, seat belts can twist. To prevent this, some designs use holes and pins for positioning, while others incorporate reinforcement ribs for the same purpose. Reinforcement ribs can also be used to facilitate drainage during the painting process. By designing 2-3 reinforcement ribs with an R6 cross-section at the bottom of the inner sill panel, along with other drainage holes, the car can effectively manage fluid flow during electrophoretic painting in the paint shop, increasing the thickness of the paint film in the inner cavity.

18

1

Share

Where is the chassis number of the Maxus G10?

The chassis number stamp of the Maxus G10 is located on the black decorative strip near the front passenger seat door, inside a long-shaped sealing strip. After lifting it, you can see the chassis number. Chassis number: The Vehicle Identification Number, abbreviated as VIN, is a unique set of seventeen alphanumeric characters used on automobiles to identify the manufacturer, engine, chassis serial number, and other specifications. To avoid confusion with the numbers 1, 0, and 9, the letters 'I', 'O', and 'Q' are not used. The 10th digit, representing the model year, does not use 'I', 'O', 'Q', 'Z', 'U', or '0'. Content of the chassis number: The Vehicle Identification Code is like the car's ID card, with each vehicle having its unique chassis number. From the chassis number, one can learn about the car's production location, vehicle type, year, assembly information, etc.

19

1

Share

Where is the engine air intake located on the Vezel?

The engine air intake of the Vezel can be located by opening the hood and following the air filter intake system. Here is some knowledge about the Honda Vezel: 1. Introduction: With its avant-garde design leading the trend, the Vezel targets the post-80s generation—those who are quick to embrace new things, dare to experience, and are eager to share as 'trend pioneers.' As a forward-looking model that explores the new generation market of post-80s users, the Vezel represents a worldview that resonates with young people—bravely breaking boundaries and boldly disrupting the world, encouraging the youth to stay unrestrained and courageous in action. 2. Exterior: The Vezel's exterior design philosophy is 'Dynamic-Cross-Solid,' achieving a perfect fusion of the coupe's stylish appearance and the SUV's dynamic image—two seemingly contradictory elements—and pointing the way for SUV design. This pioneering design concept is powerfully presented through a bold front face, a coupe-style cabin, a robust lower body, and five vibrant exterior color options.

12

4

Share

Where is the glove box located?

The glove box is located in the storage compartment under the dashboard on the passenger side of the car. Here is more information about the glove box: 1. Except for some low-end models that use a single-layer door structure, the glove box door is generally composed of an outer door panel and an inner door panel, which can be connected by infrared welding, vibration friction welding, hot plate welding, ultrasonic welding, or screws. 2. In addition, multiple crisscrossing reinforcing ribs are usually added to the inner door panel of the glove box to enhance the strength of the door panel. For glove box doors that need to provide knee protection for passengers, they must meet certain stiffness requirements. Therefore, some models embed metal plates or foam cushioning blocks between the inner and outer panels to further absorb impact energy in order to meet passenger safety requirements. Extended content: The inner and outer panels of the glove box door are generally manufactured using injection molding processes, with commonly used materials being reinforced PP or PC/ABS. The outer cover panel of the glove box door, which comes into direct contact with passengers, often undergoes additional surface treatments such as spraying soft-touch paint or covering with artificial leather to achieve a soft-touch effect.

5

3

Share

What place does the license plate Lu J belong to?

What is the actual fuel consumption of the Elysion 2.4?

What is the function of the diaphragm spring in a diaphragm spring clutch?

Where are the reinforcement ribs located on a car?

Where is the chassis number of the Maxus G10?

Where is the engine air intake located on the Vezel?

Where is the glove box located?

How often should a car over 15 years old be inspected?

What causes water return when the engine coolant temperature is not high?

What is the ground clearance of the Outlander?

What does traffic duty mean in the driver's license test?