What Parts Need to Be Replaced During the First Car Maintenance?

2 Answers
Una
07/25/25 9:10pm
For the first car maintenance, it is necessary to replace the engine oil, oil filter, gasoline filter, and air filter. Additionally, the screws and nuts under the chassis need to be inspected. The first maintenance must be performed within 5,000 kilometers or six months of the car's use. If the car exceeds six months of use, the 4S store may not provide the first maintenance service. Before performing the first maintenance, there are a few points to note: Make an Appointment in Advance: It is best to make an appointment with the 4S store beforehand. Otherwise, you might encounter situations where there are no available service bays or long waiting times. Bring Necessary Documents: When going for the first maintenance, bring essential documents such as the maintenance manual and vehicle registration. If you are unsure which documents to bring, make sure to clarify during the appointment.
Was this review help?
11
0
Share
HenryRose
08/11/25 10:12pm
During the first maintenance of a new car, the main tasks are changing the engine oil and oil filter, which are my top priorities. Because the engine produces metal debris during the break-in period, failing to replace the old oil in time can accelerate wear. My experience is that the first maintenance is usually around 5,000 kilometers. The 4S shop will thoroughly check the tires, brakes, and lights, but generally, new parts are not needed unless there is damage. For example, last time I went for the first maintenance, the technician only replaced the oil filter and engine oil, and also adjusted the wiper screws for free to prevent noise. The whole process took about half an hour and cost around three to four hundred yuan, which is a bit more expensive than small repair shops but more reliable. Remember not to skip this maintenance—it ensures engine longevity and normal fuel consumption. Otherwise, the cost of major repairs later will be higher, making this investment very cost-effective in the long run.
Was this review help?
11
2
Share
Expand All
More Forum Discussions

What kind of oil should be used for the maintenance of the Lamando 230?

The Lamando 230 car recommends the use of 5W-30 fully synthetic engine oil, and 0W-30 fully synthetic engine oil can also be used, such as Mobil 1, Shell Helix, Castrol Edge, etc. These types of engine oils have excellent lubrication effects. The following is a brief introduction to the Lamando 230: 1. In terms of appearance, the Lamando has only some subtle changes compared to the concept version, and the design remains very sporty. The front face adopts a family-style design, with a three-bar grille connected to the headlights, and round fog lights on either side of the bumper. The side lines of the new car are very smooth, with a straight and deep waistline extending all the way to the rear of the car, leaving a very impressive impression. As for the rear, the lower part of the bumper features a two-tone design, with black color matching to highlight a sporty feel. 2. The 230 car is equipped with a 1.4T low-power turbocharged engine. Unlike a naturally aspirated engine, the turbocharged engine experiences greater wear and tear on internal components during operation, so it is recommended to use higher-performance engine oil to protect the engine.
16
5
Share

What are the differences between the Honda URV240 and 370?

The differences between the Honda URV240 and 370 are as follows: 1. Different prices: The URV240 is slightly cheaper than the 370. 2. Different configurations: The Honda URV370 has higher specifications compared to the URV240, including features such as Lane Keeping Assist System, Lane Departure Warning System, Autonomous Emergency Braking, 360-degree Panoramic View Monitor, Blind Spot Monitoring, Adaptive Cruise Control, Automatic Parking, Adaptive Suspension, Head-Up Display, and Rear Seat Heating. 3. Different powertrains: Both versions of the Honda URV370 are equipped with a 2.0T engine paired with a 9-speed automatic transmission. The Honda URV240 offers three models with either a 1.5T or 2.0T engine, matched with two types of transmissions: a CVT continuously variable transmission and a 9-speed automatic transmission. The 1.5T engine delivers a maximum power output of 142 kW and a maximum torque of 243 Nm, achieving a 0-100 km/h acceleration time of 9.6 seconds and a combined fuel consumption of 7.2L/100km as per the MIIT. The 2.0T engine produces a maximum power output of 200 kW and a maximum torque of 370 Nm, with a 0-100 km/h acceleration time of 8.8 seconds and a combined fuel consumption of 8.5L/100km as per the MIIT.
2
0
Share

Where is the first aid kit located in an Audi A4?

Audi A4's first aid kit is generally placed in the car's trunk. The onboard first aid kit mainly includes dressing supplies such as elastic head covers, buckle-type tourniquets, elastic bandages, etc., sterile dressings like gauze, bandages, disposable gloves, etc., and instrument tools such as first aid scissors, medical tweezers, safety pins, life whistles, etc. Here is an introduction to the items in the first aid kit: 1. Buckle-type tourniquet: Made of ABS plastic, the elastic band is made of high-grade polyester fiber and rubber bands. Its main function is to slow down and stop bleeding from wounds. In winter, it should be loosened for one to two minutes every half hour, and in summer, every hour. 2. Ice pack: It can physically reduce fever, relieve swelling and pain, preserve freshness in the wild, and stop bleeding with cold compress. 3. Vacuum extractor: Suitable for extracting venom from wounds caused by poisonous insects, snakes, etc. 4. Three-in-one safety hammer: Features three functions - pointed head for breaking, flat head for hammering, and seat belt cutter. Used for breaking glass in emergencies to escape. 5. Multi-function hand-crank flashlight: Functions include lighting, table lamp, radio, alarm, compass, etc. It can generate electricity by hand-cranking when there's no power and can also charge mobile phones. When hand-cranking, rotate at a speed of 120 revolutions per minute clockwise. Cranking for 1 minute allows the flashlight to be used for 20-30 minutes. 6. Folding entrenching shovel: Made of high-quality high-carbon steel, triple-folded, with functions such as shoveling, digging, pickaxing, and sawing. It can be used as camping equipment and is compact and easy to carry. 7. Tow strap: Generally used for temporary towing of faulty vehicles. 8. Jumper cables: Can solve the problem of a car's battery being depleted (with correct positive and negative connections). 9. Blanket: Provides insulation against heat and cold, prevents shock, used for moving injured people, wrapping around the body, and can also be used for reflective warning. 10. Tire pressure gauge: Used to measure the air pressure of car tires. 11. Reflective vest: A safety vest with reflective strips printed with photosensitive materials on the surface for warning purposes.
1
4
Share

How to Turn Off the Maintenance Reminder in Magotan?

To turn off the maintenance reminder in Magotan, follow these steps: 1. Press and hold the small wrench button on the instrument panel; 2. Turn on the ignition; 3. Release the wrench button and press the minute adjustment button on the time setting knob; 4. Turn off the ignition and release the time button, then start the engine. The Magotan is a mid-sized 4-door, 5-seater sedan with body dimensions of 4865mm in length, 1832mm in width, and 1471mm in height, with a wheelbase of 2871mm. It is equipped with a 1.4T turbocharged engine and a 7-speed dual-clutch transmission, delivering a maximum power of 110 kW and a maximum torque of 250 Nm.
15
0
Share

What does 'media' mean on a car?

On a car, 'media' refers to the multimedia audio and video playback system. The car audio system includes: 1. The amplification section, which typically refers to the power amplifier capable of processing and amplifying signals from different audio and video media, including pre-amplifiers and post-amplifiers; 2. The speaker section, which usually refers to the front and rear field speakers and subwoofers; 3. The audio source section includes radio, tape, CD, VCD, MD, MP3, DVD, USB, HD, MemoryStick, iPod digital media; 4. Other sections usually include capacitors, power distributors, and various wiring terminals.
13
4
Share

Where is the Tire Pressure Monitoring Sensor Installed?

Tire pressure monitoring sensors are installed either inside the tire or on the exterior of the valve stem. The tire pressure monitor is a simple tire pressure monitoring system that utilizes the sensing function of ABS to compare the number of rotations of the tires. A tire with insufficient pressure will have a shorter circumference, and if one of the four tires has insufficient pressure, its rotation count will differ from the others while driving. The tire pressure monitoring system automatically monitors various tire conditions in real-time by recording tire rotation speeds or through electronic sensors installed in the tires, providing effective safety assurance for driving. Tire pressure monitoring systems are categorized into: 1. Built-in sensors, which are more stable and provide more accurate temperature monitoring data; 2. External sensors, which are relatively cheaper and easier to install.
14
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.