What Parts Are Replaced During Car Maintenance?
1 Answers
Introduction to parts replaced during car maintenance: 1. Engine oil and oil filter: These are basically replaced during every maintenance service. Car engine oil is generally divided into three types: mineral oil, semi-synthetic oil, and fully synthetic oil. Different oils have different replacement cycles. Typically, mineral oil should be replaced every 5,000 kilometers or six months, semi-synthetic oil every 7,000 kilometers or six months, and fully synthetic oil every 10,000 kilometers or one year. During daily driving, if the driving environment is harsh, the oil replacement cycle may vary. 2. Antifreeze: Car antifreeze not only prevents freezing but also helps cool the engine during operation. In winter, when temperatures are low, antifreeze protects the engine from cold damage. Generally, antifreeze should be replaced every three years or 50,000 kilometers. When replacing antifreeze, note that different brands and types of antifreeze should not be mixed, as this can reduce performance. 3. Windshield washer fluid: This is mainly used to clean dirt from the windshield and should be refilled when empty. In winter, it is recommended to use antifreeze windshield washer fluid to prevent the washer fluid reservoir from freezing and affecting normal use. 4. Cabin air filter: The cabin air filter purifies the air to ensure clean airflow from the air conditioning system. It generally needs to be replaced every one to two years. 5. Brake fluid: Brake fluid has different properties compared to other fluids. It is hygroscopic, meaning it absorbs moisture during use. When brake fluid absorbs moisture, it can form bubbles, leading to softer brakes and longer stopping distances. It is recommended to replace brake fluid every two years. 6. Transmission fluid: The replacement cycle for transmission fluid is relatively long, typically every five years or over 60,000 kilometers. Transmission fluid ensures smoother vehicle operation. During regular use, the transmission fluid should be inspected, and the correct specification should be noted when replacing it.
